Stanley Black & Decker
Proto® J360B Convertible Retaining Ring Plier Set, 12 Pieces, ANSI B107.19, US Federal GGG-P-480
Proto® Power-Track® J264SG II Tongue and Groove Plier, ASME B107.23, 2-5/8 in Nominal, 2-1/4 in L x 2-3/4 in W x 3/8 in THK Forged Alloy Steel Straight Jaw, Serrated Jaw Surface, 12 in OAL
Proto® J712SB Non-Insulated Standard Wrench, 1-1/2 in Wrench, Black Oxide, 12-1/8 in OAL, Alloy Steel Jaw, Alloy Steel Body, ASME B107.117, Alloy Steel
Proto® ProtoBlack™ Clik-Stop® J712SL Adjustable Non-Insulated Wrench, 1-1/2 in Locking Wrench, Black Oxide, 12 in OAL, Steel Body, ASME B107.8/B107.100, ANSI B107.8M
Proto® J812HD Heavy Duty Straight Pipe Wrench, 12 in OAL, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Proto® J712B Non-Insulated Standard Wrench, 1-1/2 in Wrench, Polished Chrome, 12-1/8 in OAL, Alloy Steel Jaw, Alloy Steel Body, ASME B107.111, Alloy Steel
Proto® J9523 Screw Extractor, Imperial, 15/64 in Drill, For Screw Size: 7/16 in
Proto® J6020AB Micrometer Torque Wrench, 3/4 in Drive, 120 to 600 ft-lb, Ratcheting Head, 2 ft-lb Graduation, 41 in OAL, ASME B107.14M
Proto® J6133F Dual Scale Dial Torque Wrench, 3/4 in Drive, 120 to 600 ft-lb, Fixed/Ratcheting Head, 46-1/2 in OAL, ASME B107.14M, ISO 6789, 10 ft-lb Graduation
Proto® J6181F Dual Scale Dial Torque Wrench, 3/8 in Drive, 120 to 600 in-lb, Fixed/Ratcheting Head, 10 in OAL, ASME B107.14M, ISO 6789, 10 in-lb Graduation
Proto® J6212 Torque Multiplier, 6.33:1 Gear Ratio, 6:1 Torque Ratio, 1/2 in Square Female x 3/4 in Square Male Drive, 20 in OAL, 200 ft-lb Max, 1200 ft-lb Max, Tubular Bar
Proto® TorquePlus™ J5313M Deep Length Socket, Metric, 1/2 in Square Drive, 13 mm
Proto® TorquePlus™ J5413M Standard Length Socket, Metric, 1/2 in Square Drive, 13 mm
Proto® TorquePlus™ J4713LTM Deep Length Socket, Metric, 1/4 in Square Drive, 13 mm
Proto® TorquePlus™ J5013M Deep Length Socket, Metric, 3/8 in Square Drive, 13 mm
Proto® TorquePlus™ J5213M Standard Length Socket, Metric, 3/8 in Square Drive, 13 mm
Proto® TorquePlus™ J1213MASD Anti-Slip Design Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 7 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1213MES Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 4-5/16 in OAL, Alloy Steel, Full Polished, ASME B107.100-2010
Proto® TorquePlus™ J7313M Deep Length Socket, Metric, 1/2 in Square Drive, 13 mm
Proto® TorquePlus™ J7413M Standard Length Socket, Metric, 1/2 in Square Drive, 13 mm
Proto® TorquePlus™ J5413MH Standard Length Socket, Metric, 1/2 in Square Drive, 13 mm
Proto® TorquePlus™ J6513MH Standard Length Socket, Metric, 1/4 in Square Drive, 13 mm
Proto® TorquePlus™ J6913M Standard Length Socket, Metric, 1/4 in Square Drive, 13 mm
Proto® TorquePlus™ J4713LM Deep Length Socket, Metric, 1/4 in Square Drive, 13 mm
Recently Viewed
1/2"-20 SAE Flex Lock Jam Nuts
1/4" 45-DEGREE GALVANIZED STREET ELBOW-JPW1/4G45STE >
3 X .131 RD HD STICK NAIL-JWH304816>
1/4" X 3-1/2" Round Head Slot Machine Screws
Milwaukee® 49-57-2002 Tang Drive Annular Cutter, 2 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 2 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-1000 Annular Cutter, 1 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
