Stanley Black & Decker

Porter-Cable ROUTER TEMPLATE GUIDES POR 42045

Porter-Cable® 42045 template guides are a great way to guide a router for a very controlled cut using a pattern or template. The guide attaches to the router base to keep the bit a specific distance from the template's edge while allowing the bit to cut in where needed.

Porter-Cable SANDER CASES POR 44360

Porter-Cable® 44360 Carrying Case, For Use With Belt Sander and Plunge Router

Porter-Cable SANDER PADS--PK/5 POR 77085

The Porter-Cable Foam Backed Drywall Sander Pads (77085) have a patented design to elminate swirl marks. The foam-backed pads fit the Porter-Cable 7800 Drywall Sander. The sander pads are used for sanding joint compound and removing textures or wallpaper residues.

Porter-Cable SOLID SURFACE REPLACEMENT BEARING POR 43912

Porter-Cable® 43912 Ball Bearing Pilot With Collar, 7/8 in OD, For Use With Standard Router, 1/4 in ID

Porter-Cable STRIKE AND LATCH TEMPLETS POR 59375

Amazon.com Why hire a locksmith or struggle with a chisel when you can install doorknobs yourself with minimal effort? The Porter-Cable 59375 is a professional quality kit that makes it a snap to mortise latch and strike plate openings with any collet router measuring 1/4 inch. The various settings for strike and latch plate sizes ensure precise results. (The strike plate sizes include 1-1/8-by-2-3/4 inches, 1-1/2-by-2-1/4 inches, and 1-1/2-by-2-3/4 inches and latch plate sizes of 1-by-2-1/4 inches, 1-1/8-by-2-1/4 inches, and 1-1/8-by-2-3/4 inches.) Compatible with doors with a thickness of 1-3/8 inches and 1-3/4 inches, the 59375 comes with a high-speed steel router bit and bearings, brads, and instruction manual.

Porter-Cable SUTTER SANDING PAD FOR 444 POR 14447

Porter-Cable® 14447 Shutter Pad, For Use With Adhesive Backed Rolls, 444 Profile Sander

Porter-Cable T-SLOT HSS ROUTER BITS POR 43219

Porter-Cable® 43219 Router Bit, 2-Edge T-Slot Router, 3/8 in Dia Cutting, 5/16 in D Cutting, 1/4 in Dia Shank, HSS

Porter-Cable TEKS SCREWDRIVERS--USE "POR" 4640

Irwin® Hanson® 6642 Flat Hex Threading Die, M12x1.25 Thread, 3/8 in THK, 1.137 in OD Die, High Carbon Steel

Porter-Cable TILT BASE LAMINATE TRIMMERS POR 7319

Porter-Cable® 7319 Laminate Trimmer, Slide Switch, 1/4 in Chuck, 30000 rpm Speed, 120 VAC

Porter-Cable TRU-MATCH BIT CT ROUTER BITS POR 43692

Porter-Cable® 43692 Tru-Match Router Bit, 1/2 in Dia Cutting, 1/2 in Dia Shank, Carbide

Porter-Cable TRU-MATCH ROUTER BASE KITS POR 6921

Porter-Cable® Tru-Match™ 6921 Edge Jointing System, For Use With Router

Porter-Cable V/S QUICK CHANGE JIGSAWS POR 9543

Porter-Cable® 9543 Jig Saw, 120 VAC, For Blade Shank: T-Shank, 10-1/4 in OAL

Porter-Cable VERTICAL GRINDERS POR 7400

The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout-filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.

Porter-Cable WAVY EDGE ROUTER BIT POR 43180

Porter-Cable® 43180 Router Bit, Wavy Edge Router, 1-1/4 in Dia Cutting, 2-9/32 in OAL, 1/4 in Dia Shank, Carbide

Porter-Cable WET/DRY VACUUM CLEANER ACCESSORYS POR 78110

This 6-piece set supplies tools and attachments to give you even more uses for your wet/dry vacuum. Designed for use with Porter-Cable® 7810 wet/dry vacuum, this assortment comes with two suction tubes, one bend tube, one universal brush, one universal floor tool and one crevice tool. Metal extensions ensure durability, while the variety of brushes and wands make it easier to vacuum your car, clean furniture, or remove dust from concrete, tile and wood floors.

Porter-Cable WET/DRY VACUUM CLEANER FILTERS POR 78114

Porter-Cable® 78114 2-Ply Vacuum Filter Bag, Paper, For Use With #7810 Vacuum

Porter-Cable WET/DRY VACUUM CLEANER FLAT FILTER POR 78115

Porter-Cable® 78115 Exhaust Vacuum Filter, 8-1/2 in L x 4-1/2 in W

Porter-Cable WHEEL RING NUTS POR 54348

Porter-Cable® 54348 Center Wheel Retaining Nut, For Use With 87615 and 87616 Double Insulated Disc Sander/Grinder

Porter-Cable X-LONG SQUARE DRIVE BITS POR 5504

Porter-Cable® 5504 Extra Long Magnetic Square Drive Power Bit

Porter-Cable® Tradesman's PC418IDC-2 4-Tool Cordless Combination Kit, Tools: Drill/Impact Driver/Reciprocating Saw, 18 V, 1.5 Ah Lithium-Ion Battery

POWER 3/4" X 4-3/4" S/S CONCRETE ANCHORS PWR 7341

The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.

POWER 5/8" X 8-1/2" CONCRETE ANCHORS PWR 7438

The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

POWERS .22-CALIBER POWDER HAMMER 2" PINS PWR 50096

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.

POWERS .300"-HEAD POWDER HAMMER 3" PINS PWR 50120

Drive pins with a 0.3 in Dia head are designed for permanently fastening a fixture to concrete, concrete over steel deck, concrete masonry walls and A36 or A572/A992 structural steel. The fasteners are manufactured with a 0.145 in Dia shank in various lengths. Knurled shank designs are available for installations in thick steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool and provide guidance during the driving operation. The fasteners are also available in with a mechanically galvanized (MG) coating for use in treated lumber.