Stanley Black & Decker
Porter-Cable PNEUMATIC ROOFING NAILER KIT POR RN-175
Porter-Cable® coil roofing nailer is a rugged, lightweight piece of equipment that has the capacity to fasten a full bundle of shingles on a single load. The housing is designed to be as light as possible while still offering the durability you expect on a jobsite - which is nice, considering how unpleasant it is to lug a weighty tool around on a roof. The ergonomic handle and rubber grip are comfortable to hold, even over long periods of time because roofing nailers take a beating, no matter how careful the roofer, Porter-Cable® souped this nailer up with steel protectors and rubber pads to keep it from sliding and/or falling.
Porter-Cable PLUNGE BASES POR 6931
Protect against accidents and keep every job running smoothly with this plunge router base from Porter-Cable®. The 6931 is made specially for use with routers 690, 9690 and 691, giving you more options and flexibility when completing projects. It also saves you money by supplying the plunge feature you need, without necessitating the purchase of a whole new router. Lightweight and easy to use, the 6931 offers six depth stop positions and completely enclosed springs for consistent operation, as well as a convenient 2-1/2 in plunge range.
Porter-Cable PAINT REMOVER POR 7403
Porter-Cable® 7403 Abrasive Paint Remover
Porter-Cable OGEE UNDER BWL BIT POR 43910
Porter-Cable® 43910 Router Bit, 1/2 in Dia Cutting, 2-51/64 in OAL, 1/2 in Dia Shank, Carbide
Porter-Cable OGEE STILE ROUTER BITS POR 43560
Porter-Cable® 43560 Router Bit, Ogee Stile Router, 1-5/8 in Dia Cutting, 1/2 in Dia Shank, Carbide
Porter-Cable OGEE ROUTER BIT- 1/2 SHANK POR 43571
Porter-Cable® 43571 Router Bit, Ogee Horizontal Panel Raiser Router, 2-1/2 in Dia Cutting, 2 Flutes, 1/2 in Dia Shank, Carbide
Porter-Cable OGEE RAIL ROUTER BITS POR 43561
Porter-Cable® 43561 Router Bit, Ogee Rail Router, 1-5/8 in Dia Cutting, 3-3/32 in OAL, 1/2 in Dia Shank, Carbide
Porter-Cable NO DRIP 3/4" MATERIAL BIT POR 43903
Porter-Cable® 43903 Router Bit, No Drip Edge Router, 3-21/64 in OAL, 1/2 in Dia Shank, Carbide
Porter-Cable MORTISING DOOR HINGE TEMPLETS POR 59370
Porter-Cable® 59370 Single Door Hinge Template, 1/4 in Collet, For Use With 1/4 in Collet Router
Porter-Cable MORTISE/TENON HSS ROUTER BIT POR 43450
Porter-Cable® 43450 Porter-Cable® Router Bit, 5/16 in Dia Cutting, 1/4 in Dia Shank
Porter-Cable MORITSE & TENON CT ROUTER BIT POR 43451
Porter-Cable® 43451 Pattern Cutting Laminate Trim Bit, 5/16 in Dia Cutting, 2-21/32 in OAL, 3/4 in D Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable MODEL #330 SANDING PADS POR 13597
Porter-Cable® 13597 Standard Replacement Sanding Pad, For Use With 330 and 505 Random Orbit Finishing Sander, 4 in L x 4 in W x 1/4 in THK, 60 Grit
Porter-Cable MODEL #100 ROUTER WRENCHES POR 42157
Porter-Cable® 42157 Double Ended Collet Wrench, For Use With 100 1-1/16 and 1-1/8 in Routers
Porter-Cable MAGNETIC BIT HOLDERS POR 54422
Porter-Cable® 54422 Magnetic Bit Holder
Porter-Cable LATCH MORTISERS POR 51101
Porter-Cable® 51101 Latch Mortiser, For Use With 511 Cylindrical Lock Boring Jig
Porter-Cable INSET DOOR EDGE ROUTER BITS POR 43565
Porter-Cable® 43565 Router Bit, Door Lip Router, 1-1/2 in Dia Cutting, 3 in OAL, 2 Flutes, 1/2 in Dia Shank, Carbide
Porter-Cable HINGE BUTT CORNER CH ROUTER BIT POR 42234
A must-have for hanging doors, this spring loaded corner chisel is more efficient than a hand chisel, and works quickly to ensure that corners are perfectly square. Compact enough to carry in your pocket, with a 3/8-inch cutter edge, this handy tool creates a 90 degree square corner when simply placed on any corner and tapped with a hammer. And because the Porter-Cable 42234 Corner Chisel self-aligns, accuracy is never an issue; you get the right fit every time with minimal maneuvering.
Porter-Cable FLUSH CUT CT ROUTER BITS POR 43268
Porter-Cable® 43268 3-Wing Flush Trim Router Bit, 3/8 in Dia Cutting, 1/4 in Dia Shank, Carbide
Porter-Cable ELECTRIC OFFSET LAMINATE TRIMMERS POR 7312
Porter-Cable® 7312 Offset Laminate Trimmer, 1/4 in Chuck, 30000 rpm Speed, 3/4 hp, 120 VAC
Porter-Cable ELEC LAMINATE TRIMMER SINGLE SPEED POR PC-E-6430
Porter-Cable® PCE6430 Laminate Trimmer, On/Off Switch, 1/4 in Chuck, 31000 rpm Speed, 0.6 hp, 120 VAC
Porter-Cable DRYWALL SANDER PADS POR 78125
Porter-Cable® 78125 Drywall Sander Pad, For Use With 7800 Drywall Sander, 8-7/8 in Dia
Porter-Cable DRYWALL DRIVERS--USE "POR" 6645
Irwin® Hanson® 7544 Adjustable Round Threading Die, 1/2-13 Thread UNC Thread, 1 in OD Die, High Carbon Steel
Porter-Cable DRYWALL DRIVERS POR 2640
Irwin® Hanson® 2640 Taper Bottoming and Plug Tap
Recently Viewed
Crescent® Mezurall™ Y8210 Measuring Tape, 10 ft L x 1/2 in W Blade, Steel Blade, Feet and Inches to 1/16th Top Edge, Inches to 1/16th Bottom Edge, First 12 in to 1/32nds Graduation
Crescent Lufkin® Mezurall series tape measures are built with durability and comfort in mind. Featuring a compact and sturdy chrome case, these tape measures fit easily into pockets or travel bags.
Drillco 428A160 4285 Construction Reamer, Imperial, 15/16 in Dia x 6-7/8 in L, 1/2 in Dia 3-Flat Shank, Spiral Flute
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank
GP® 1297MH Standard Length Driver, 4 to 12 mm Hex, 3/8 in Drive, 7 Pieces
Drillco 428A156 4285 Construction Reamer, Imperial, 7/8 in Dia x 6-7/8 in L, 1/2 in Dia 3-Flat Shank, Spiral Flute
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment. 3-flats reduced shank
The nominal size of a Taper Pipe Tap (NPT) is that of the pipe fitting to be tapped, not the actual size of the tap.
The Makita 12V max lithium-ion cordless 2-Pc. Combo kit delivers pro power and pro speed in an ultra-compact size, and offers two ideal additions to any tool box or tool belt. The LCT209W includes cordless tools for drilling, driving, and fastening. It's part of Makita's expanding 12V max lithium-ion cordless line-up, which includes driver-drills as well as an impact driver, impact wrench, circular saw, recipro saw, jig saw, vacuum, and flashlights. Consistent with the rest of Makita's groundbreaking lithium-ion battery technology, the 12V max lithium-ion battery delivers more power in a compact size for maximum efficiency. The LCT209W includes an ultra-compact two-speed driver-drill that weighs only 2.2 lb and delivers 200 in-lb of max torque. The variable speed impact driver weighs only 2 lb and delivers 800 in-lb of max torque for driving and fastening.
