Seymour Of Sycamore
SEYMOUR® 620-1415 MRO® Enamel Spray Paint, 16 oz Container, Aerosal Spray Form, Gloss Black, 18 sq-ft Coverage, 10 min Curing
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
SEYMOUR® 620-1423 MRO® Enamel Spray Paint, 16 oz Container, Aerosal Spray Form, Red, 18 sq-ft Coverage, 10 min Curing
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
SEYMOUR® 620-1431 MRO® Spray Primer, 20 oz Container, Aerosal Spray Form, Light Gray, 18 sq-ft Coverage, 20 min Curing
A superior, lead-free industrial coating formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag and gives twice the coverage of conventional aerosol enamels. A rust proof industrial primer formulated specifically for use with MRO® industrial protective coatings. This high solids paint gives twice the coverage of conventional aerosol primers. Heat resistant, VOC compliant and fast drying.
SEYMOUR® 620-1433 MRO® Enamel Spray Paint, 16 oz Container, Aerosal Spray Form, Black, 18 sq-ft Coverage, 10 min Curing
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
Recently Viewed
Browning® 1122910 Single Strand Minimum Bore Type B Roller Chain Sprocket With Hardened Teeth and Keyway, 3/4 in Dia Bore, 8.32 in OD, #50 Chain, 40 Teeth, 5/8 in Pitch, Steel
Browning®Type B minimum bore sprockets are offered in single, double and triple strands. Offerings include 25 to 200 pitch range. Minimum bore sprockets are available in bore ranges from 1/4 to 8-3/8 in.
Loctite® 234263 lb 8008™ 1-Part Anti-Seize Lubricant, 8 oz Brush-In Cap Bottle, Paste Form, Copper, 1.3
LOCTITE LB 8008 C5-A® provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. Typical applications include original equipment and maintenance, and equipment associated with petroleum chemicals, steel mills, power plants, marine and foundries.
Proto® J226-01G Needle Nose Plier With Side Cutter and Wire Stripper, 2-5/8 in L x 3/4 in W, Diamond Serrated/Smooth Steel Jaw, 3/8 in W Tip, 7-1/2 in OAL
Proto® J226-01G Needle Nose Plier With Side Cutter and Wire Stripper, 2-5/8 in L x 3/4 in W, Diamond Serrated/Smooth Steel Jaw, 3/8 in W Tip, 7-1/2 in OAL
5" X 5/8" -11 BACKING PAD KITS-MWK49363465 >
100-W 130-VOLT HALOGEN FLOOD BULBS-BUL100PARHFL >
Dodge® 130361 211 Normal Duty Pillow Block Ball Bearing Unit, 55 mm Dia Bore, 101.6 mm L Bolt Center-to-Center, 57.2 mm Base to Bore Centerline, 139.7 mm OAL x 117.6 mm OAH
A setscrew shaft attachment method is the most common means of securing a mounted ball bearing to a shaft and also the easiest to install. The Dodge® mounted ball bearing offering is engineered with a 65 deg setscrew angle. This ensures the maximum grip onto the shaft, especially when using premium cup point set screws with the high quality manufacturing of the Dodge® insert.
