Morse Cutting Tools
MORSE C/Tool 1-1/4"-12 SAE/NF 6-FLUTE TAPER TAP MCT 32329
MORSE® 32329 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-12 Thread, H4 Thread Limit, Tapered Chamfer, 6 Flutes, Bright, HSS
MORSE C/Tool 1-1/4"-12 SAE/NF RETHREAD HEX DIES MCT 31327
MORSE® 31327 1266 Hex Rethreading Die, 1-1/4-12 UNF Thread, 1 in THK, Carbon Steel
MORSE C/Tool 1-1/4"-12 SAE/NF ROUND SPLIT DIES MCT 31227
MORSE® 31227 1195 Adjustable Round Split Threading Die, 1-1/4-12 UNF Thread, 1 in THK, 3 in OD Die, Carbon Steel
MORSE C/Tool 1-1/4"-7 USS NC 4-FL HAND PLUG TAP MCT 32487
MORSE® 32487 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-7 Thread, H4 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 1-1/4"-7 USS NC HAND BOTTOM TAPS MCT 32664
MORSE® 32664 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-7 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 1-1/4"-7 USS/NC 4-FLUTE TAPER TAPS MCT 32328
MORSE® 32328 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/4-7 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 1-1/4"-7 USS/NC RETHREAD HEX DIES MCT 31326
MORSE® 31326 1266 Hex Rethreading Die, 1-1/4-7 UNC Thread, 1 in THK, Carbon Steel
MORSE C/Tool 1-1/4"-NPT 11-1/2-TPI 5-FLUTE TAPS MCT 36129
MORSE® 36129 2119 Pipe Tap, 1-1/4-11-1/2 Thread
MORSE C/Tool 1-1/4"-NPT 11-1/2-TPI 5-FLUTE TAPS MCT 86336
MARXBORE™ 86336 206 General Purpose Pipe Tap, 1-1/4-11-1/2 Thread
MORSE C/Tool 1-1/64" X 1/2"-SHANK S&D DRILLBITS MCT 19063
MORSE® 19063 1424S Silver & Deming Drill, 1-1/64 in Drill - Fraction, 1.0156 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 1-1/64" X 1/2"-SHK S&D DRILLBITS MCT 17063
MORSE® 17063 1424R Silver & Deming Drill, 1-1/64 in Drill - Fraction, 1.0156 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 1-1/8-7 4-FL HSS TAP SET MCT 32724
MORSE® 32724 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
MORSE C/Tool 1-1/8" 3-MT MORSE DRILLBITS MCT 10238
MORSE® 10238 1302 General Purpose Taper Shank Drill Bit, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, #3 Morse Taper Shank Taper, HSS
MORSE C/Tool 1-1/8" HAND REAMERS MCT 21254
MORSE® 21254 1601 Hand Reamer, 1-1/8 in Dia x 11-5/8 in OAL, 1-1/8 in Dia Straight Shank, Straight Flute
MORSE C/Tool 1-1/8" HSS 3MT BRIDGE REAMER MCT 22732
MORSE® 22732 1701 Bridge Reamer, 1-1/8 in Dia, 12 in OAL, #3 Morse Taper Shank, Left Hand Spiral Flute
MORSE C/Tool 1-1/8" MULTIFLUTE ENDMILLS MCT 43555
MORSE® 43555 1897 Non-Center Cutting Regular Length Single End End Mill, 1-1/8 in Dia Cutter, 1-1/2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, Bright
MORSE C/Tool 1-1/8" TAPER SHANK DRILLBITS MCT 10072
MORSE® 10072 1302 General Purpose Taper Shank Drill Bit, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, #4 Morse Taper Shank Taper, HSS
MORSE C/Tool 1-1/8" X 1/2"-SHANK S&D DRILLBITS MCT 17070
MORSE® 17070 1424R Silver & Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 1-1/8" X 1/2"-SHANK S&D DRILLBITS MCT 19067
MORSE® 19067 1424S Silver & Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 1-1/8" X 1/2"-SHK MARXMAN DRILLBIT MCT 80081
MARXMAN™ 80081 424R Silver & Deming Drill, 1-1/8 in Drill - Fraction, 1.125 in Drill - Decimal Inch, 1/2 in Shank, HSS
MORSE C/Tool 1-1/8"-12 ROUND SPLIT DIES MCT 31225
MORSE® 31225 1195 Adjustable Round Split Threading Die, 1-1/8-12 UNF Thread, 1 in THK, 3 in OD Die, Carbon Steel
MORSE C/Tool 1-1/8"-12 SAE 4-FLUTE BOTTOM TAPS MCT 32663
MORSE® 32663 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/8-12 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 1-1/8"-12 SAE NF 4-FL PLUG TAPS MCT 32486
MORSE® 32486 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/8-12 Thread, H4 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
MORSE C/Tool 1-1/8"-12 SAE NF B/T/P TAP SETS MCT 32725
MORSE® 32725 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H4 Thread Limit
Recently Viewed
1" -FEMALE PIPE THREAD METAL GALVANIZED CAP
5/8″ Rope, 6″ OD SAE 841 Bearing, 0.75 Shaft Size, 1.0625″ Hub width Forged Steel
Irwin® Speedbor® 88702 Heavy Duty Manual Locking Hex Key Extension, 1/4 in Shank, 12 in L, 1-1/16 in Dia Body
Drill in hard-to-reach areas with the 6 in. Wood Drilling Hex Key Extension Bit. Durable and portable this bit makes a great addition to any tradesman’s toolbox. Compatible with quick-change, hex, and round shanks. Includes hex key to secure extension during use.
Milwaukee® QUIK-LOK™ 48-28-1050 Universal Hex Drill Extension, 7/16 in Shank, 18 in L
The 7/16 in. universal QUIK-LOK™ extension has an innovative design that fits all 7/16 in. shanks - with or without a power-groove. The uniques design requires no tools to change out bits, making it fast and efficient. These new extensions are impact rated for maximum durability.
