Milwaukee Tool

The MILWAUKEE® M12™ Spot Light delivers up to 750 lumens of TRUEVIEW™ High Definition Output, making it the most portable, high-performing spotlight. This hand-held spotlight features high and low output modes of operation for versatile beam distance control and added clarity in closer situations. The rechargeable LED spotlight features a beam distance of 700 Yards, to spot objects and areas a long-distance away. A strobe mode for use in safety situations and the spotlight is impact and water resistant to survive professional use. The Milwaukee M12™ LED spotlight is backed by a limited lifetime LED warranty, the LEDs never need to be replaced.

The M18™ FUEL™ drill driver is the most powerful 18 V cordless drill on the market. The POWERSTATE™ brushless motor delivers up to 1200 in-lb of torque and up to 2000 rpm, providing faster drilling speed under heavy load to increase productivity. At only 7-1/2 in L, it is the most compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight workspaces. REDLINK™ Plus™ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM™ XC5 battery pack delivers more work per charge and more work Over the life of the pack than the competitors. The M18™ fuel drill/driver's all metal ratcheting locking chuck provides maximum grip, bit retention and durability.

The M18™ FUEL™ drill driver is the most powerful 18 V cordless drill on the market. The POWERSTATE™ brushless motor delivers up to 1200 in-lb of torque and up to 2000 rpm, providing faster drilling speed under heavy load to increase productivity. At only 7-1/2 in L, it is the most compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight workspaces. REDLINK™ Plus™ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM™ XC5 battery pack delivers more work per charge and more work Over the life of the pack than the competitors. The M18™ fuel drill/driver's all metal ratcheting locking chuck provides maximum grip, bit retention and durability.

The M18™ FUEL™ hammer drill is the most powerful 18 V cordless drill on the market. The POWERSTATE™ brushless motor delivers up to 1200 in-lb of torque and up to 2000 rpm, providing faster drilling speed under heavy load to increase productivity. At only 7-3/4 in L, it is the most compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight workspaces. REDLINK™ Plus™ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM™ XC5 battery pack delivers more work per charge and more work Over the life of the pack than the competitors. The M18™ FUEL™ hammer drill's all metal ratcheting locking chuck provides maximum grip, bit retention and durability.

The M18™ FUEL™ hammer drill is the most powerful 18 V cordless drill on the market. The POWERSTATE™ brushless motor delivers up to 1200 in-lb of torque and up to 2000 rpm, providing faster drilling speed under heavy load to increase productivity. At only 7-3/4 in L, it is the most compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight workspaces. REDLINK™ Plus™ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM™ XC5 battery pack delivers more work per charge and more work Over the life of the pack than the competitors. The M18™ FUEL™ hammer drill's all metal ratcheting locking chuck provides maximum grip, bit retention and durability.

Powered by FUEL™ technology, the M18™ FUEL™ 1 in SDS Plus™ rotary hammer delivers faster than corded speed, corded durability and all day work on one charge. The Milwaukee® POWERSTATE™ brushless motor provides 1.7 ft-lb of impact energy, 0 to 1400 rpm and 0 to 4900 bpm. The Milwaukee® REDLITHIUM™ XC5 battery packs provide all day work on 1-charge, 20% more power and 2X more life than standard lithium-ion batteries. REDLINK™ Plus™ intelligence integrates full circle communication between tool, battery and charger to protect from overloading, overheating and over discharging.

Designed for the carpenter, remodeler and general contractor the M18 FUEL™ 7-1/4 in. circular saw from Milwaukee generates the power of a 15 A corded saw, cuts faster than a 15 A corded saw and gives users up to 750 cuts per charge. The POWERSTATE™ brushless motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT™ HD12.0 battery (sold separately) delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.

The M18 fuel 7-1/4 in. dual bevel sliding compound miter saw was designed for the demand needs of the professional carpenter and remodeler. Designed to increase productivity and efficiency on the jobsite, the 2733 combines the best in accuracy, portability and performance. Weighing in at only 28 lbs with battery, the 2733 is the lightest weight saw in its class. Dual bevel functionality provides users the most efficient and productive way make a variety of different cuts without flipping or turning the work piece. The combination of the POWERSTATE brushless motor and M18 REDLITHIUM XC5.0 battery delivers over 600 cuts per charge for all day run-time on a single charge.

The MILWAUKEE® M18 FUEL™ 8-1/4 in. table saw with ONE-KEY™ generates the power of a 15 A corded saw, 24-1/2 in. of rip capacity and up to 600 linear feet of cutting per charge. Designed for professional carpenter, remodeler and general contractor the MILWAUKEE® M18 FUEL™ 8-1/4 in. table saw with ONE-KEY™ is optimized for power, portability and productivity. The POWERSTATE™ brushless motor provides 6,300 RPM and higher speeds under load for corded cutting performance. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM HIGH OUTPUT™ HD12.0 battery (sold separately) delivers unmatched run-time in all applications. The rack and pinion fence system maintains accuracy and allows for quick adjustments. For maximum productivity, the tool has on board storage for the included accessory and a tool free guard and riving knife changes. An all metal frame provides durability for daily jobsite use. Compatible with ONE-KEY™, this is the industry’s first table saw that wirelessly connects to a smart phone to track and manage a tool’s performance and location. Integrated tool tracking, available through ONE-KEY™, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY™ compatible devices within 100 ft range of your phone. By building the functionality into the tool, not the battery, all devices can be tracked, even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. Paired with tracking, integrated tool security provides the ultimate theft protection. Protect your investment with features like tool lock-out, or hide tool from the nearby devices screen so only you can see your tool is in range.

The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

The MILWAUKEE® M18 FUEL™ 21 Degree Framing Nailer Kit sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 21 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge. This kit includes one M18™ REDLITHIUM™ XC5.0 battery pack, an M18™ & M12™ Multi-Voltage Charger, a rafter hook, non-marring tip, and a contractor bag.

The MILWAUKEE® M18 FUEL™ 30 Degree Framing Nailer sets the new standard for cordless framing nailers. It has a nitrogen spring mechanism, POWERSTATE™ brushless motor, and REDLINK™ Intelligence, providing pneumatic performance and cordless convenience. The framing nailer can sink full round head nails into dense engineered lumber to tackle the most demanding framing applications. To increase productivity and efficiency, the framing gun fires 3 nails per second with zero ramp-up time, firing a nail as soon as the trigger is pulled. The cordless framing nailer uses only Milwaukee's REDLITHIUM™ Batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and reducing associated maintenance. The M18 FUEL™ 30 Degree Framing Nailer delivers pneumatic performance and durability that professional carpenters and remodelers expect, without the hassle of a compressor and hose or gas cartridge.

The MILWAUKEE® M18 FUEL™ 18GA ¼” Narrow Crown Stapler delivers peak productivity, providing unmatched stapling performance without the hassle of a compressor and hose. The Narrow Crown Stapler uses a nitrogen air spring for the power to consistently sink staples to the proper depth in hard materials with the ability to adjust to drive staples in soft materials without blowing through. The combination of a POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence provides an unmatched fire rate with zero ramp-up time, for maximum efficiency throughout the day. This battery powered narrow crown stapler is compact and lightweight, to provide better access into tight spaces and limit fatigue. The MILWAUKEE® M18 FUEL™ 18GA ¼” Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool.

The M18™ FUEL™ 1/4 in hex impact driver is the most powerful tool in its class. At 1800 in-lb of fastening torque, this tool drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. The POWERSTATE™ brushless motor delivers up to 0 to 3000 rpm with constant power output to drive screws faster. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries (sold separately), which deliver more work per charge and more work Over the life of the pack than competitive batteries on the market. The 4-mode DRIVE CONTROL™ provides greater control Over output speed and power for greater versatility by delivering 0 to 850 rpm in mode 1 0 to 2100 rpm in mode 2 and 0 to 3000 rpm in mode 3. Self-tapping screw mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

The M18™ FUEL™ 1/4 in hex impact driver is the most powerful tool in its class. At 1800 in-lb of fastening torque, this tool drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. The POWERSTATE™ brushless motor delivers up to 0 to 3000 rpm with constant power output to drive screws faster. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM™ XC5 batteries deliver more work per charge and more work Over the life of the pack than competitive batteries on the market. The 4-mode DRIVE CONTROL™ provides greater control Over output speed and power for greater versatility by delivering 0 to 850 rpm in mode 1 0 to 2100 rpm in mode 2 and 0 to 3000 rpm in mode 3. Self-tapping screw mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

The M18™ FUEL™ 1/2 in high torque impact wrench with friction ring kit features the most powerful cordless wrench in its class, delivering up to 700 ft-lb of maximum fastening torque, 1100 ft-lb of nut-busting torque and up to 2X more runtime the POWERSTATE™ brushless motor outperforms competitors with constant power output and the Milwaukee® designed impact mechanism delivers up to 700 ft-lb of maximum fastening torque. The REDLITHIUM™ XC5 extended capacity battery pack (not included) delivers more work per charge and more work Over pack life than Any other battery. It features an onboard fuel gauge to help you monitor the charge more accurately, so there's less downtime on the job. REDLINK™ Plus™ intelligence allows the operator to choose between 2 fastening modes with Milwaukee® proprietary DRIVE CONTROL™ feature and ensures maximum performance and protection from overload, overheating and over-discharge. This 18 V Lithium-Ion FUEL™ high torque impact wrench offers quick, tool-free socket changes with a 1/2 in friction ring anvil. You'll get ultimate comfort during extended use with the new contoured soft-grip.

The 2766 M18 FUEL™ high torque 1/2 in. impact wrench with pin detent provides a full corded replacement delivering 750ft-lbs of fastening torque and 1100ft-lbs of nut-busting torque. The industry's most compact cordless high torque impact wrench at 8.1 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool includes a 1/2 in. pin detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

The 2766 M18™ FUEL™ high torque 1/2 in impact wrench with pin detent provides a full corded replacement delivering 750 ft-lb of fastening torque and 1100 ft-lb of nut-busting torque. The industry™ most compact cordless high torque impact wrench at 8.1 in L, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 rpm once the fastener has been busted loose. This tool includes a 1/2 in pin detent anvil which provides superior socket retention. A premium rubber over mold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

The M18 FUEL™ 1/2 in. extended anvil controlled torque impact wrench w/ ONE-KEY™ delivers controlled torque for fastening and up to 1,100 ft-lbs of nut-busting torque. Professional tire technicians can perform faster tire service without the hassle of pneumatic hoses, compressors, and torque sticks. Four customizable modes deliver unique fastening torque outputs needed to perform tire service on vehicles such as sedans, light trucks and box trucks. With up to 1,100 ft-lbs of breakaway torque, this tool provides more than enough power to remove rusted lug nuts. The REDLITHIUM™ battery pack is compatible with 175+ M18™ tools, delivering you with more work per charge and more work over the life of the pack than competitors. With ONE-KEY™, you also gain the ability to customize, track and manage your impact wrench.

The worlds first brushless die grinder that delivers corded performance with over 20 min of grinding and up to 10X longer motor life. The M18™ FUEL™ 1/4 in Die Grinder delivers maximum sustained power with 20000 rpm capable of running carbide burrs or up to 3 in flap wheels for grinding or surface preparation applications. The M18™ REDLITHIUM™ XC5.0 Battery provides up to 25 min of grinding with superior pack construction and electronics. The POWERSTATE™ brushless motor provides up to 10X longer tool life and lower cost of ownership than traditional brushed motors. The die grinder features REDLINK™ Plus™ intelligence, the most advanced system of cordless power tool electronics, for maximum performance and longest tool life.

The MILWAUKEE® M18™ FUEL™ 9" Cut-Off Saw w/ ONE KEY™ is an extremely versatile solution for cutting a large variety of materials. The cordless cut off saw runs on M18™ REDLITHIUM™ batteries instead of gas like traditional cut off saws. The cut off saw delivers the Power To Cut Reinforced Concrete as well as a large variety of other metal and masonry materials. It delivers this performance while being Up To 50% Lighter Than Gas demo saws on the market today. Using the M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 Battery (not included), the saw ensures No Gas Headaches. The concrete cutting saw produces no fumes so it can be used indoors. It also starts up instantly, eliminates the need to mix gas and oil, and there is no gas engine maintenance. The M18 FUEL™ 9" Cut-Off Saw also has ONE-KEY™ integrated to wirelessly connect the tool with a smartphone to track and manage it.

The M18 FUEL™ mud mixer with 180° handle is the industry’s first dedicated cordless solution that delivers the performance and durability to fully replace corded mixers. With the POWERSTATE™ brushless motor it has the power to mix heavy compounds, such as concrete and mortar. Using our REDLINK™ Intelligence the variable speed dial, the variable speed trigger and the lock on button combine to give the user ultimate control for a consistent mix and cleaner working environment. With the M18 REDLITHIUM™ battery the user can mix up to 15, five gallon buckets on one 5.0 Ah battery. The 180° adjustable handle is designed to allow every user to optimize the handle position for their comfort. This Milwaukee cordless solution increases productivity by eliminating the need for cords and allows the user to mix the material at the workspace where it is being applied.

The M18™ FUEL™ mud mixer with 180 deg handle is the industry's first dedicated cordless solution that delivers the performance and durability to fully replace corded mixers. With the POWERSTATE™ brushless motor it has the power to mix heavy comb, such as concrete and mortar. Using our REDLINK™ intelligence the variable speed dial, the variable speed trigger and the lock on button combine to give the user ultimate control for a consistent mix and cleaner working environment. With the M18™ REDLITHIUM™ battery the user can mix up to 15, five gallon buckets on one 5 Ah battery. The 180 deg adjustable handle is designed to allow every user to optimize the handle position for their comfort. This Milwaukee® cordless solution increases productivity by eliminating the need for cords and allows the user to mix the material at the workspace where it is being applied.

The MILWAUKEE® M18 FUEL™ Compact Band Saw offers a light-weight, balanced design with the largest capacity of any compact band saw at 3-1/4” X 3-1/4”. The band saw is equipped with a POWERSTATE™ Brushless motor, Constant Power Technology and Jobsite Armor Technology™ for the fastest cuts and better protection from drops and debris. Milwaukee REDLINK PLUS™ Intelligence delivers the most advanced system of cordless power tool electronics, providing optimized performance and overload protection using total system communication between tool, battery and charger. The variable speed trigger, tool-free locking adjustable shoe, and LED work light provides maximum control and productivity. An integrated rafter hook for hanging allows for easy storage in-between cuts. The M18 FUEL™ Compact Band Saw also has pipe reamer attachment compatibility to easily attach the customized reamer attachment (49-90-2029, sold separately) to the back of the band saw to cut and ream with the same tool. One 8/10 TPI Extreme metal cutting band saw blade is included.