Milwaukee Tool
Milwaukee® 49-22-0065 Stringer Bead Plumber's Selfeed Bit Kit, 10 Pieces, Alloy Steel
The Milwaukee® plumber's Selfeed bit kit is a convenient, cost-effective assortment of the high-performance Milwaukee Selfeed drill bits and spur auger bits you need on the jobsite. Milwaukee Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for trades that demand woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. The kit includes Selfeed bits in diameters 1-3/4 in., 2-1/8 in., and 2-9/16 in., as well as spur auger bits in diameters 7/8 in., 1-1/8 in., 1-1/4 in. and 1-1/2 in.
Milwaukee® 49-22-0071 Universal Flat Boring Bit Set, 6 Pieces, For Use With 48-28-3350 12 in Bit Extension, Carbon Steel
Bore small, clean holes at any angle in a variety of materials with the Milwaukee® 6-piece 6 in. universal flat boring bit set. These premium quality flat boring bits are made of heat-treated high carbon steel, so the drill points and cutting edges can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. These bits offer a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling. 3/16 in. shank diameter. The set consists of six of the most popular size bits (3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in. and 1 in.) in a carrying case.
Milwaukee® 49-22-0130 Stringer Bead Contractor's Selfeed Bit Kit, 7 Pieces, Alloy Steel
The Milwaukee® 7-piece contractor's Selfeed bit kit is a complete assortment of the high-performance Milwaukee Selfeed drill bits you need on the jobsite. Milwaukee Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The dymobits improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. The kit includes Selfeed bits in diameters 1 in., 1-1/8 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2-1/8 in., and 2-9/16 in. in an impact resistant carrying case.
Milwaukee® 49-22-1168 General Purpose Heavy Duty Jig Saw Blade Set, 5 Pieces, Universal Shank, For Use With 6256-6 Jig Saw
Milwaukee® U-Shank Bi-Metal Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast, and have a longer life. These blades fit U-Shank style Jig Saws. Includes 5 individual blades.
Milwaukee® 49-22-1560 Keyless Drill Chuck, 1/4 in Capacity, Integral Hex Shank Mounting, Plain Bearing, 48-66-3350
This replacement 1/4 in. chuck comes as standard equipment with the 6540-1 2.4 Volt single speed cordless screwdriver as well as 2-speed models (6547-1 and 6547-22). This chuck allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a three jawed chuck. Includes chuck key.
Milwaukee® 49-22-7100 Vacuum Pad Assembly, For Use With 4115, 4125, 4130 and 4136 Diamond Coring Rig with Detachable Vacuum Pad, NEMA 1-15P
Vacuum pad assembly for use with models with detachable vacuum pads, 4115, 4125, 4130, and 4136. Single vacuum pad which provides approximately 1,800 Lb. of holding force. Supplied as standard equipment (with models 4115-22 and 4120-22).
Milwaukee® 49-22-8108 Extension Kit, For Use With 6480-20 Panel Saw
The 49-22-8108 extension kit is used with Milwaukee's 6480-20 panel saw and is recommended whenever material over 6 ft. in length will be cut frequently. The kit extends the roller material carriage 18 in. on each end making the overall roller material carriage 8 ft. in length.
Milwaukee® 49-22-8200 Quick-Change Contractor's Hole Saw Plate Cutter Kit, 5 Pieces, For Use With 49-57-0035 and 49-57-0037 Quick-Change Arbor, Carbide Tip
For materials up to 1/2 in. these Carbide tipped steel plate cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.
Milwaukee® 49-22-8310 Quick-Change Electrician's Hole Saw Sheet Cutter Kit, 7 Pieces, For Use With 49-57-0035 and 49-57-0037 Quick-Change Arbor, Carbide Tip
For materials up to 3/16 in. these Carbide tipped sheet metal cutters produce fine, burr-free holes in a variety of materials. They are ideal for stainless steel, structural steel studs and electrical boxes. They can also improve your production in cast iron, brass, aluminum and other thin non-ferrous metals. These cutters are designed to be used in hand held drills to achieve drill press quality holes. The Carbide tips stay sharper longer than high-speed steel or bi-metal cutters giving these cutters longer life. Lubrication during drilling extends the life of the Carbide cutter. Milwaukee recommends the use of Hawg wash cutting fluid for best results. Hawg wash fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Arbors 49-57-0035 or 49-57-0037 are needed for these cutters.
Milwaukee® 49-22-8510 Compact Heavy Duty Right Angle Attachment Kit, For Use With Right Angle Grinder, 90 deg Offset, 1/4 in Dia Shank, 235 in-lb Torque
Drilling holes and installing screws or bolts in an area too small for a conventional drill/driver can exhaust the patience of the most experienced contractor. When you get tired of using a Stubby screwdriver you can either shell out the big bucks for a right angle drill or you can save your money and purchase Milwaukee's right angle attachment. Milwaukee Tool, one of the most respected names in the tool industry, manufactures a 1/4 in. hex right angle attachment that is ideal for cordless drills up to and including the more powerful 18 Volt models. The tool’s quick-change magnetic chuck accepts standard 1/4 in. hex drive accessories and the durable metal housing utilizes steel gears and ball bearing construction that gives the user a full 235-inch-pounds of torque.
Milwaukee® 49-24-0146 Fixed Focus Rechargeable Cordless Work Light, LED Lamp, 12 V DC, Li-Ion Battery
The MILWAUKEE® M12™ Work Light outshines, outlasts and outperforms all other subcompact LED lights on the market. The LED light is 2X brighter than conventional incandescent bulbs and runs up to 2X longer on a single charge. The work light features a 90° rotating head to easily direct the light beam at the desired work areas, while its magnetic back enables hands-free use. The cordless battery powered work light has a sealed aluminum head that provides impact and weather resistance and is backed by a limited lifetime LED warranty, the LEDs never need to be replaced.
Milwaukee® 49-25-1103 OPEN-LOK™ 3-Piece Blade Set, For Use With Oscillating Multi-Tool, 1-3/8 in Cutting Width, 2 in Max Plunge Cut Depth, High Carbon Steel
The MILWAUKEE® OPEN-LOK™ 1-3/8" HCS Wood Oscillating Multi-Tool Blades are made from premium high carbon steel with edge ground teeth for fast wood cutting. Designed for optimal cutting performance in wood, PVC, drywall, and other soft materials. The MILWAUKEE® HCS Wood blades feature more teeth and an increased 1-3/8" cutting width for a deeper plunge cut than previous generation wood blades. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.
Milwaukee® 49-25-1501 OPEN-LOK™ 1-Piece Blade, For Use With Oscillating Multi-Tool, 1-3/8 in Cutting Width, 1-5/8 in Max Plunge Cut Depth, Carbide
The MILWAUKEE® OPEN-LOK™ 1-3/8" Carbide Teeth Metal Oscillating Multi-Tool Blades are designed for metal cutting in screws, bolts, nails, and more. Carbide Teeth blades last up to 50X longer than standard bi-metal blades and can be used in a wide range of materials while maintaining longer blade life. These blades feature a reinforced Universal Fit OPEN-LOK™ anchor for better strength & control and allow for quick blade changes across 100+ multi-tools. Not compatible with Starlock tools. MILWAUKEE® oscillating multi-tool blades are designed and made in the USA with global materials.
Milwaukee® 49-26-1036 Locator Drywall Assembly, For Use With 6742-20 Serial 146B Drywall Screwdriver, Stainless Steel Tip
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 49-32-0081 Lubricant Hawg Wash Cutting Fluid, 16 oz Bottle, Mild Pleasant Petroleum Odor/Scent, Semi-Solid Form, Brown
Hawg wash lubricant is specifically designed for extreme pressure applications; water soluable chemical fluid concentrate; one 16 oz. Bottle makes one gallon of solution.
Milwaukee® 49-36-0402 Backing Plate, For Use With M18 FUEL™ 15mm, 21mm Random Orbital Polishers
The MILWAUKEE® Hook & Loop attachment method of this 6” Backing Plate means that any Hook & Loop enabled polishing pad can be used with the backing plate, giving you a greater level of freedom in selecting your accessories. The Milwaukee 6” Backing Plate is designed for use with MILWAUKEE® M18 FUEL™ 15mm Random Orbital Polisher, but it has also been optimized for use with the M18 FUEL™ 21mm Random Orbital Polisher. The 6” Backing Plate can be interchanged between the two polishers as needed based on application requirements. The durable rubber design aids in the dispersion of heat in application which prolongs the life of the backing plate itself, saving our users both time and money.
Milwaukee® 49-36-0700 Polishing Pad, 9 in OAD, Hook and Loop Attachment, Blended Wool Pad
Milwaukee® 49-36-0700 Polishing Pad, 9 in OAD, Hook and Loop Attachment, Blended Wool Pad
Milwaukee® 49-36-3450 Backing Pad Kit, 4-1/2 in Dia Pad, Locking Nut Attachment
For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6145 to a sander.
Milwaukee® 49-36-3455 Backing Pad Kit, 4-1/2 in Dia Pad, Locking Nut Attachment
For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6140-6, 6148-6, 6149-6 and 6151 to a sander.
Milwaukee® 49-36-3460 Backing Pad Kit, 5 in Dia Pad, Locking Nut Attachment
For versatility you can use your Milwaukee® mini grinder for sanding operations as well. This lightweight polypropylene backing pad kit converts Milwaukee® 6145 to a sander.
Milwaukee® 49-36-3475 Gripper Backing Pad, 4-1/2 in Dia Pad, Hook and Loop Attachment
This 4-1/2 in hook and loop (H and L) backing pad makes changing surface conditioning discs a breeze. Just peel them off, stick on a new one - quick and easy. This 4-1/2 in backing pad fits any 5/8-11 threaded spindle 10000 rpm sander grinder.
Milwaukee® 49-36-3750 Rubber Pad Assembly, For Use With Sander Grinder, 5/8-11 Thread, 7500 rpm Maximum speed
When converting Milwaukee® Sander Grinders to sanding operations a variety of sanding disc backing pad systems are available. The Rubber Backing Pad is more durable than the Phenolic and but is also heavier in weight. Where heavy production sanding will be encountered, this is a more viable option. When using the 9 in Rubber Backing Pad 49-36-3750 use disc nut 49-40-0360. Does not include sanding disc.
Milwaukee® 49-40-6105 Universal Surface Dust Shroud, For Use With Universal Grinder, 7/16 in H Collar, 17/64 in H Min Insert, 2-1/8 to 3 in Fits Collar Dia
The Milwaukee® universal grinder dust shrouds work universally across most pro-brands, while competitors shrouds are proprietary to their own grinders. The Milwaukee® shrouds feature a durable and lightweight design with a convenient clear window for easy navigation. The purpose of grinder shrouds is to reduce exposure to dangerous debris, crystalline silica, and dust particles that can cause health issues for users who work with stone and concrete.
Milwaukee® 49-50-0200 Heavy Duty Vacuum Pump Assembly, For Use With 49-22-7100 Pad, 120 V AC, 1/3 hp
Heavy duty 1/3 H.P. Vacuum pump assembly complete with vacuum gauge, air filter, air hose and cord. Supplied as standard equipment (with models 4115-22 and 4120-22). Recommended only for use with 49-22-7100 single pad.
Recently Viewed
40 TOOTH SPROCKETS FOR #80 CHAIN-BRW80R40 >
1/2"-IPS 3/4" COPPER INSULATION-M-D02659>
1/4-DR SAE/MM PASS-THRU SOCKET SET-GRW8925>
BUFFING PADS-PAD4022BLK>
E-TRACK STRAP-REDET6512>
