Milwaukee Tool

The MILWAUKEE® M18™ Dual Bay Rapid Charger charges battery packs up to 40% faster, reducing downtime and maximizing productivity. The charger accepts all M18™ batteries and is able to charge two batteries at the same time. The 18-volt battery charger features REDLINK™ Intelligence, communicating directly with batteries to monitor cell voltage, temperature and charge status to optimize their performance and extend the life of the pack. As an added level of communication, the lithium-ion battery charger indicates when the battery reaches an 80% charge, providing confidence that the batteries can complete a substantial amount of work without waiting for a full charge.

This Milwaukee 18 V lithium-ion battery works on the M18™ cordless tool system and has 3.0 amp hours of run-time. This battery powers over 40 Milwaukee M18™ cordless tools. Managed by Milwaukee's exclusive REDLINK™ Intelligence, the battery features overload protection, a temperature management system, individual cell voltage monitoring, discharge protection and a battery FUEL™ gauge.

This Milwaukee® 18 VDC Lithium-Ion battery works on the M18™ cordless Tool System and has 1.5 Ah of runtime. This battery powers over 40 Milwaukee® M18™ cordless tools. The M18™ Compact RED LITHIUM™ battery offers less weight and a reduced size than the M18™ XC High Capacity RED LITHIUM™ battery pack to reduce user fatigue. Managed by Milwaukee® exclusive REDLINK™ intelligence, the battery features Overload Protection, a Temperature Management System, Individual Cell Voltage Monitoring, Discharge Protection and a Battery Fuel Gauge.

Our M18™ brushless 2-tool combo kit (2893-22CX) offers the best-in-class drilling and fastening solutions. The 1/2 in hammer drill (2902-20) and 1/4 in hex impact driver (2850-20) feature the M18™ cordless system's patented technologies and electronics, innovative motor design and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2 in hammer drill is the most powerful drill in its class, delivering 725 in-lb of torque. The 1/4 in hex impact driver has the fastest application speed in its class and delivers 1600 in-lb of torque. Both of our compact tools feature Milwaukee® brushless motors optimized specifically for the tool. Built-in REDLinK™ electronics enhances the performance of the M18™ REDLITHIUM™ batteries, providing more efficient power delivery and fewer trips to the charger.

Loud clear sound. Built for work. Featuring a high-performance audio system and rugged design, the M18™ jobsite radio is built to amplify and survive the jobsite. Dual speakers and passive radiators combine to produce sharp highs, rich mids, and deep bass at all volumes. Durable metal speaker grills and shock absorbing end caps protect from drops and other harmful jobsite conditions while integrated handles allow for easy transport and storage. Listening options include a digital processor with best-in-class reception and signal clarity or a 3.5 mm aux jack for wired playback. A weather-sealed auxiliary compartment protects devices and houses a 2.1A USB charging port. The M18™ jobsite radio is powered by all M18™ REDLITHIUM™ batteries or A/C power.

The MILWAUKEE® M18™ Brushless Threaded Rod Cutter is a dedicated cutting solution for the most common threaded rod sizes. This includes coarse 1/4", 3/8" and 1/2" mild steel and 1/4" and 3/8" stainless steel threaded rod. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18™ REDLITHIUM™ 2.0Ah Battery. The four-sided cutting dies cut all sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand. The rod cutter has optimized blade geometry and cut speed to prevent chips and sparks. The tool has auto jaw opening for fast, repetitive cuts while a reverse button helps prevent unintended cuts. The tool's centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides a stable surface for benchtop cuts.

The M18 FUEL™ drywall screw gun is faster than corded, features auto start functionality and delivers up to 3X longer run time than other cordless competitors. The POWERSTATE™ brushless motor spins at 4,500 RPM’s resulting in faster productivity. With REDLINK Plus™ intelligence, Milwaukee's auto start feature automatically starts the motor on contact with drywall providing less noise between screws and 3X longer run time. REDLITHIUM™ 5.0 Ah batteries the drywall gun delivers up to an industry leading 64 sheets on one charge. The M18 FUEL™ drywall screw gun delivers the balance and weight desired by professionals for all day use.

Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18™ FUEL™ 3/8 in mid-torque impact wrench is the most powerful 3/8 in impact wrench in the industry. The POWERSTATE™ brushless motor delivers upto 0 to 2300 rpm resulting in increased productivity. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries, the M18™ FUEL™ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROL™ provides greater control over output speed and power for greater versatility. At 6.7 in L and 5.3 lb with a 5 Ah battery, the M18™ FUEL™ 3/8 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool offers quick, tool-free socket changes with a 3/8 in friction ring anvil. The anvil provides the most durable solution allowing users to work longer than any cordless competitor in its class. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

MILWAUKEE® FASTEST 18V CORDLESS TIRE INFLATOR. The MILWAUKEE® M18™ Inflator delivers fast, accurate, easy inflation with the portability to take anywhere. Optimized for passenger, light truck, and other medium-duty tires. Rated to deliver max 150PSI, the high-efficiency motor tops-off 33” light truck tires in under 1 minute. The TrueFill™ Technology features an auto-pressure check that is designed to WAIT for the pressure to stabilize, CHECK the system pressure, and FILL until the desired target is reached. In addition, an Auto Shut-Off feature will stop inflation at selected PSI to prevent overinflation allowing users to set it & forget it. Furthermore, the unit includes 4 PSI memory slots, anti-vibration feet, a 36” inch hose with an all-brass Schrader chuck, and an on-board hose and nozzle storage.​

The M18™ FUEL™ 1/2 in Hammer Drill is the industry's most powerful drill by delivering up to 60% more power, up to 1.5 in shorter length and up to 2X faster speed under heavy load. The POWERSTATE™ brushless motor delivers 1200 in-lb of torque and 2000 rpm, providing fast drilling through demanding applications. At 6.9 in length, this is the most compact drill in its class, giving better access in tight spaces and reducing fatigue. The REDLINK™ Plus™ intelligence ensures maximum performance and protects from overloads, heating and over discharge. The REDLITHIUM™ XC5 battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.

The M18™ 1/2 in. compact brushless drill/driver delivers the most power in its class while maintaining compact size. The Milwaukee built brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries provides more efficient power delivery, for fewer trips to the charger. At only 6-1/2 in. long and 3.4 lbs. (with battery), this drill provides excellent control and balance in a compact size, perfect for work overhead or in tight spaces. This compact drill driver 500 in-lbs of torque and 0-500 / 0-1, 800 RPM, for a wide range of drilling and fastening applications. An all-metal gear case and 1/2 in. metal chuck provides maximum durability.

The Milwaukee® M18™ jobsite radio/charger is the first charging radio to bring the power of Bluetooth® to the jobsite, while delivering the industry's best reception and sound. The most advanced radio of its kind, the M18™ jobsite radio/charger features a Bluetooth® receiver so you can stream rich, full sound wirelessly from over 100 Ft. away. Its unique battery charger allows you to charge any M18™ battery without sacrificing reception or sound quality. For added versatility, a high-power USB port allows you to charge most portable electronic devices over 50% faster than any competitor. The M18™ radio/charger's lightweight, high-strength design includes a reinforced roll cage for protection from weather and abusive jobsite conditions. The radio/charger also offers the industry's largest on-board, weather-sealed storage compartment to protect your small belongings and smart phones. A 16 in. auxiliary input cord and 2 AAA batteries are included.

The M18™ Force Logic™ 1590 ACSR cutter is the simplest way to cut transmission lines. A patent pending jaw design enables opening with just two fingers, enhancing alignment while delivering easiest operation with class 3 gloves. The wire automatically closes the jaw, providing hands-free jaw closure and the easiest mid-span cuts. Fully balanced, only 11.75 lbs, and the fastest transmission cutter, the M18™ Force Logic™ 1590 ACSR cutter delivers the best control while enhancing lineman's productivity and reducing fatigue. The M18™ Force Logic™ 1590 ACSR cutter features a fully enclosed high speed hydraulic pump, brushless motor, REDLINK™ electronics and REDLITHIUM™ battery delivering ultimate reliability in the toughest conditions. Featuring Milwaukee® ONE-KEY™ Technology, view tool usage, receive notifications for recommended maintenance and sync information wirelessly to the cloud. The kit includes M18™ REDLITHIUM™ XC 5.0 extended capacity battery, AC/DC wall and vehicle charger, utility bag and carabiner.

Faster water transfers, faster service calls. The M18™ transfer pump is the industry's first cordless transfer pump with the fastest setup in the marketplace. With an innovative self-priming pump, you can connect and go quicker than ever. The tool's flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18 Ft. of lift and produces up to 75 Ft. of head height. As a part of the M18™ system of tools, it is powered by REDLITHIUM™ battery packs, which deliver up to 144 gallons moved per charge on a XC extended capacity battery pack included in the kit. On board REDLINK™ Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. Additionally, REDLINK™ provides optimized performance, and overload protection abusive situations.

The MILWAUKEE® M18™ Transfer Pump offers faster water transfers and service calls. This portable water transfer pump is the industry’s first cordless transfer pump, offering the fastest setup. With an innovative self-priming pump, professionals can connect and go quicker than ever. The Milwaukee transfer pump's flexible impeller and powerful pump move water at up to 480 Gal. per hour, generates up to 18 ft. of lift and produces up to 75 ft. of head height. As a part of the M18™ System, REDLITHIUM™ battery packs power the water transfer pump, which delivers up to 240 Gal. moved per charge on an XC5.0 battery pack. Onboard REDLINK™ Intelligence can recognize when the tool stops moving water and automatically shuts itself off to avoid dry pumping. REDLINK™ also provides optimized performance and overload protection in abusive situations.

The 2767 M18 FUEL™ high torque 1/2 in. impact wrench with friction ring eliminates the need to use a pneumatic tool for those stubborn and rusted bolts by delivering 1,000ft-lbs of fastening torque and 1400ft-lbs of nut-busting torque. With 2X faster removal speed, users will be able to get the job done faster and be more productive throughout their day. By providing the industry's most compact cordless high torque impact wrench at 8.39 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool offers quick, tool-free socket changes with a 1/2 in. friction ring anvil. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

The M18™ 1/4 in hex brushless impact driver is the most compact impact driver in its class and delivers over 50% more runtime than impact drivers with brushed motors. The Milwaukee® built brushless motor REDLinK™ electronics and REDLITHIUM™ batteries provide more efficient power delivery, for fewer trips to the charger. At only 5-3/8 in long and 3.1 lb (with battery), this impact driver provides excellent control and balance in a compact size, perfect for work overhead or in tight spaces. The M18™ 1/4 in hex brushless impact driver delivers up to 1500 in-lb of torque and 0 to 2800 rpm for a wide range of fastening applications.

The (2696-26) M18™ cordless lithium-ion 6-tool Combo kit includes the 1/2 in. hammer drill / driver (2602-20), SAWZALL® Reciprocating Saw (2621-20), circular saw (2630-20), 1/4 in. hex impact driver (2650-20), 4.5 in. cut-off/grinder (2680-20), and work light (49-24-0171). The M18™ cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Red Lithium™ the M18™ cordless system delivers more torque, more power, and longer run-time than the competition.

The (2696-24) M18™ cordless lithium-ion 4-tool Combo kit includes the 1/2 in. hammer drill / driver (2602-20), SAWZALL® Reciprocating Saw (2621-20), 1/4 in. hex impact driver (2650-20), and work light (49-24-0171). The M18™ cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by Red Lithium™ the M18™ cordless system delivers more torque, more power, and longer run-time than the competition.

The 2696 - 23 M18™ cordless 3-tool Combo kit includes the M18™ 1/2 in. high torque impact wrench with friction ring (2663-20), M18™ 3/8 in. Compact Impact Wrench with friction ring (2651-20), and M18™ work light (49-24-0171). The M18™ cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM™, the M18™ cordless system delivers more torque, more power, and longer run-time than the competition.

The M18™ cordless 15-tool combo kit includes the 1/2 in M18™ compact hammer drill/Driver (2607-20), M18™ 1/4 in hex impact driver (2656-20), M18™ 1/2 in compact impact wrench with pin detent (2659-20), M18™ 1/2 in high-torque impact wrench with friction ring (2663-20), M18™ right angle drill (2615-20) , M18™ 5/8 SDS Plus™ rotary hammer (2612-20), M18™ SAWZALL® Recip saw (2620-20), M18™ band saw (2629-20), M18™ 6 1/2 in circular saw (2630-20), M18™ 5 3/8 in metal saw (2682-20), M18™ Cut-off/Grinder (2680-20), M18™ jig saw (2645-20), M18™ Multi-Tool (2626-20), M18™ compact blower (0884-20), M18™ led work light (2735-20), M18™ Six pack Sequential charger (48-59-1806)and (4) M18™ REDLITHIUM™ XC 4.0 extended capacity battery Packs. The M18™ cordless Lithium-Ion system's patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™ the M18™ cordless system delivers more torque, more power and longer runtime than the competition.

The 2694-24 M18 cordless lithium-ion 4-tool Combo kit includes the 1/2 in. hammer drill / driver (2602-20), SAWZALL® Reciprocating Saw (2620-20), circular saw (2630-20), and work light (49-24-0171). The M18™ cordless lithium-ion system's patented technologies and electronics, innovative motor design, and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by RED LITHIUM™, the M18™ cordless lithium-ion system delivers more torque, more power, and longer run-time than the competition.

The M18™ cordless Lithium-Ion system's patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™, the M18™ cordless Lithium-Ion system delivers more torque, more power and longer runtime than the competition.

The M18™ cordless Lithium-Ion system's patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™, the M18™ cordless Lithium-Ion system delivers more torque, more power and longer runtime than the competition.