Milwaukee Tool
Milwaukee 120-VOLT 16-GAUGE NIBBLERS MWK 6890
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
Milwaukee 120-VOLT 12-AMP RECIPROSAW MWK 6519-30
The 6519-30 SAWZALL® RECON saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 1-1/8 in. stroke length and a 12 amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a Quik-Lok® blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics.
Milwaukee 120-VOLT 1/2"-DRIVE IMPACT WRENCH MWK 9071-20
Delivering 300 ft. lbs of torque and weighing only 7.0 lbs., this tool has a fantastic power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism at 1800 RPM (no load). This model features a friction ring and through hole socket retention, and a rocker switch for quick selection of forward or reverse. The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time. This Milwaukee square drive impact wrench was designed to maximize your productivity and reduce downtime with frequent accessory changes.time.
Milwaukee 120-VOLT 1/2"-DRIVE IMPACT WRENCH MWK 9070-20
Delivering 300 ft. lbs of torque and weighing only 6 lbs., this tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism at 1800 RPM (no load). This model features a pin-detest system to securely retain sockets or adapters and a rocker switch for quick selection of forward or reverse. The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.
Milwaukee 120-VOLT 1/2" RIGHT-ANGLE DRILLS MWK 3107-6
1/2 in. trigger speed control reversing. 7.0 amp Milwaukee built motor. Helical cut, heat treated gears with durable, glass reinforced nylon handle. Reversing with all ball and roller bearings. Right angle drill features head and handle swivel 360 deg., can be locked tight in any position. Kit includes tool, open end wrench, 3/16 in. socket wrench, chuck remover bar, side handle and impact resistant carrying case.
Milwaukee 120-VOLT 1/2" RIGHT ANGLE DRILLS MWK 1680-20
The 1/2 in. Super Hawg has power and speed for drilling holes of all sizes in wood frame construction. The 13 amp motor has two operating speeds of 1750 and 450 RPM with a clutch in the low gear range. Speed shifting is easy. The comfort grip Roto-Lok handle features 3 positions with 90 degree left-right rotation for maximum operator comfort for all applications.
Milwaukee 120-VOLT 1/2" 8-AMP 850-RPM DRILLS MWK 0299-20
Outperforms all other 1/2 in. drills in its category. The 1/2 in. magnum® drill has the power and construction to deliver long-lasting performance. The all-metal gear case and diaphragm provide high durability on the jobsite. The ergonomic, textured grip and two-finger trigger optimize user comfort and balance.
Milwaukee 120-VOLT 1-3/4-HP ROUTERS MWK 5615-21
Get the upper hand! With Milwaukee's BodyGrip® routers featuring the industry's first tactile hand grip designed into the base of the router, a fast, accurate linear depth adjustment system, a patented above-the-table depth adjustment mechanism, and a carrying case with integral RouterStation™. Featuring a 1-3/4 max HP (11 amp, 24,000 RPM) Milwaukee motor, these powerful and precise new routers give you the upper hand in all but the heaviest of cuts. The BodyGrip® design is a comfortable over-molded rubber grip wrapped around the base with an adjustable hand strap that allows for left and right-handed operation, and two over-molded palm-grip side handles for superior comfort, maneuverability and control. For the router user who prefers a trigger control we've created a D-handle version (5619-20). This unit features a durable glass-filled nylon handle with comfortable cushion-grip and a trigger switch with special lock-on button for continuous effortless operation.
Milwaukee 120-V REC/SAWS--USE "MWK" 6538-21
The new Milwaukee® orbital super SAWZALL® reciprocating saw has a high powered 13 A Milwaukee® built motor for fast orbital cutting action. The variable speed trigger provides 0 to 3000 SPM with a 1-1/4 in stroke. The 6536-21 is counter balanced for smoother operation with less vibration. A gear protecting clutch allows the saw to withstand impacts, lengthening the life of the tool. The QUIK-LOK™ blade clamp provides fast and easy blade changes and an impact-resistant carrying case provides room to store a variety of accessories.
Milwaukee 120-V REC/SAWS--USE "MWK" 6538-21
The new Milwaukee® rotating handle orbital super SAWZALL® reciprocating saw provides the ultimate in power and versatility. 360 deg rotating handle locks at 45 deg increments and can continuously rotate without going back to starting position. The trigger can stay on while rotating providing optimal user comfort in various cutting applications. The saw has a high powered 13 A Milwaukee® built motor for fast orbital cutting action. The variable speed trigger provides 0 to 3000 SPM with a 1-1/4 in stroke. other features include a speed dial for repetitive cuts, counter balance for smoother operation with less vibration and gear protecting clutch for longer tool life. A QUIK-LOK™ blade clamp provides fast and easy blade changes. 6523-21 also comes with an impact-resistant carrying case.
Milwaukee 120-V R/A DRILLS--USE "MWK" 1675-6
D-handle power and a right angle drive head make this drill package perfect for stud and joist drilling. Powerful 7 amp motors and three speed ranges make this a versatile tool that will handle a wide range of applications. The 3102-6 features a 500 RPM motor; this gives the two speed head 335 RPM on low and 750 RPM on high. These powerful units come in an impact resistant carrying case and include a side handle for ease of operation.
Milwaukee 120-V NO-LOCK-SWITCH GRINDER MWK 6121-31
The 11 amp 4-1/2 in. small angle grinder (Trigger grip, no-lock) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6121-31 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Milwaukee 120-V LOCKINGSWITCH GRINDER MWK 6121-30
The 11 amp 4-1/2 in. small angle grinder (Trigger grip, lock-on) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6121-30 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Milwaukee 120-V IMPACT WRENCH KIT MWK 9072-22
This model features a Quik-Lok® cord, pin-detent system to securely retain sockets or adapters and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. Delivering 300 ft. lbs of torque and weighing only 6 Lb., this tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism at 1800 RPM (no load). The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.
Milwaukee 120-V 900-RPM COMPACT DRILLS MWK 1630-1
This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle large hole drilling and material mixing applications. Its 900 rpm operating speed optimizes productivity on smaller-bit and medium-torque jobs. Built for two-handed operation, the drill features extra long handles for added leverage and control. You'll get quiet performance from the heat treated, helical cut gears.
Milwaukee 120-V 7"/9" NON-LOCK ANGLE GRINDER MWK 6088-31
The 6088-31 7 Ft./ 9 in. 15.0 amp large angle grinder (Non lock-on) delivers performance and durability for the most difficult grinding jobs. The 15 amp, 4.2 HP motor provides high overload protection and power for the toughest jobs. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool. Both a 7 in. and 9 in. type 27 grinding guard are included for greater productivity.
Milwaukee 120-V 7"/9" 6000-RPM SANDERS MWK 6066-6
This 15 A, 6000 rpm, 3.5 maximum horsepower sander provides high performance under severe applications. As a sander, this tool can be used with a 7 or 9 in backing pad for removing paint or rust from metal, plastic or fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. Sold as a sander, this tool can be converted to a grinder by purchasing a 7 or a 9 in guard which is easily attached to the tool. Grinding applications remove more material and may be used to shape metal.
Milwaukee 120-V 650-RPM COMPACT DRILL MWK 1610-1
This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle large hole drilling and material mixing applications. Its 650 rpm operating speed optimizes productivity in general purpose use. Built for two-handed operation, the drill features extra long handles for added leverage and control. You'll get quiet performance from the heat treated, helical cut gears.
Milwaukee 120-V 6" W/LOCK-ON-SWITCH GRINDERS MWK 6161-30
The 13 amp 6 in. Small angle grinder (Paddle, lock-on) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6161-30 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Constant power technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Milwaukee 120-V 6" SLIDE-SWITCH GRINDER MWK 6161-33
The 13 amp 6 in. Small angle grinder (Slide, lock-on) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6161-33 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Constant power technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Milwaukee 120-V 4-1/2" SLIDE-SWITCH GRINDERS MWK 6146-33
The 11 amp 4-1/2 in. small angle grinder (Slide, lock-on) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6146-33 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Milwaukee 120-V 4-1/2" LOCK-ON GRINDER MWK 6140-30
The 6140-30 4-1/2 in. 7.5 amp small angle grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including debris baffles and multi-port exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.
Milwaukee 120-V 2" SPLINE ROTOHAMMERS MWK 5340-21
Perform a variety of digging and drilling jobs on floors or the ground with this heavy duty INLINE™ design. The 2 in spline drive rotary hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The INLINE™ design offers more comfortable operation and the soft-grip side-handle can be attached in three positions - including the rear switch handle - to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control and a service reminder light the tool uses standard spline and round/hex accessories and comes with a carrying case.
Milwaukee 120-V 14" CHOPSAW/CUTOFF SAW MWK 6180-20
14" ELECTRIC/CHOPSAWS/CUTOFF SAWS-MWK618020 >
Recently Viewed
The MILWAUKEE® 16ft Compact Magnetic Tape Measures have up to 15' of reach* and a magnet that easily attaches to EMT & steel studs. The tape is wear and impact-resistant with nylon blade protection and an additional anti-tear coating on the first 6 in of the blade, reducing tape tear. The compact measuring tapes are constructed with a 5-point reinforced frame for impact resistance.
Boardwalk® BWK6202 Multifold Towel, 250 Sheets, 1 Plys, Paper, Natural, 9 in W
These absorbent folded towels provide a practical, economical solution for hand drying in high-traffic commercial washrooms, office restrooms, and shared facilities. The textured design is easy to grab and helps wipe hands clean and dry with dependable absorbency. Each pack is individually wrapped for convenient storage, transport, and sanitary handling before use. Designed to dispense one towel at a time, they help reduce waste while allowing users to touch only the towel they take. A smart alternative to air dryers, these paper towels support a cleaner, more comfortable restroom experience. Dispenser sold separately.
Milwaukee® MX4™ 48-20-7371 4-Cutter Rotary Hammer Drill Bit, 1/2 in Drill Bit, 25/64 in, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL
The MILWAUKEE® SDS Plus 4-Cutter MX4™ 1/2" X 4" X 6" Drill Bits with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
Pyramex® SG9810R20 Full Reader Eyewear, +2.0 Diopter, Clear Lens, Translucent Gray, Nylon Frame, Polycarbonate Lens, Yes UV Protection, ANSI Z87.1, CAN/CSA Z94.3-15
McGuire-Nicholas® 506 Heavy Duty Tool Belt, Cotton Webbing, Black
The latest innovation in abrasive products, surface conditioning discs are tough non-woven nylon suited for conditioning metal, wood or plastic. The can be used to deburr, blend welds and clean surfaces. There web-like construction conforms to surface shapes and gets into corners and irregular surfaces where other discs can not. Disc changes are quick with the hook and loop backing attachment system.
