Milwaukee Tool
Milwaukee® 4208-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 1-1/4 in Chuck, 2 hp, 4-3/8 in Drill to Center From Base, 250/500 rpm Spindle Speed, 120 V AC
This combination unit features the 4203 adjustable position, variable speed base and the 4297-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4206-1 Adjustable Position Heavy Duty Electromagnetic Drill Press, 3/4 in Chuck, 2 hp, 4-11/16 in Drill to Center From Base, 350 rpm Spindle Speed, 120 V AC
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4204-1 Adjustable Position Electromagnetic Drill Press, 1/2 in Chuck, 1-1/4 hp, 1-1/4 in Drill to Center From Base, 600 rpm Spindle Speed, 120 VAC
This combination unit features the 4203 adjustable position, variable speed base and the 4253-1 1/2 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee® 4203 Adjustable Position Portable Electromagnetic Drill Press Base, For Use With 1/2 in and Thicker Flat Ferrous Material, 1 in Chuck, Steel, 11 in D Drill
The 4203 electromagnetic variable speed adjustable base features solid state electronic switching and an 11 in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. The 4203 offers adjustably of 3/4 in. in direction of base length front-to-back and 20 deg right or left of center. Line feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2 in. and thicker.
Milwaukee® 4202 Electromagnetic Fixed Position Portable Drill Press Base, For Use With 1/2 in and Thicker Flat Ferrous Material, 3/4 in Chuck, Steel, 9 in D Drill
The 4202 electromagnetic variable speed base features solid state electronic switching and a 9 in. drill travel. Feedback speed control maintains speed and a motor/magnet lockout prevents demagnetization during operation. For use on any flat ferrous material, 1/2 in. and thicker.
Milwaukee® 42-28-0211 Rear Load Blade Guide Block Kit, For Use With 6225, 6226 2-Speed Cordless Band Saw
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee® 42-04-0600 Water Hose Adapter, For Use With 4094 Serial 740-1001 2-Speed Dymodrill
Milwaukee® 42-04-0600 Water Hose Adapter, For Use With 4094 Serial 740-1001 2-Speed Dymodrill
Milwaukee® 4130 Large Base Stand Diamond Coring Rig
The Milwaukee® model 4130 dymo-rig stand designed for the heavy duty hole driller. Larger column and base assembly ensure strength and durability for many years service. dymo-rig stands feature large wheels for ease of movement. You can bolt it to the wall or the floor or use the optional vac-pad for added versatility.
Milwaukee® 4120-22 Diamond Coring Rig, 4.8 hp, 120 VAC, 20 A
This contractor series large base stand features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment. The durable precision-ground 2-1/2 in. steel column is 43-1/2 in. high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side. Model 4120-22 comes with model 4096 coring motor, Vac-U-Rig® kit as well as a meter box. The Vac-U-Rig® assembly uses a vacuum pump to apply suction to a large pad mounted on the bottom of the rig. This aids in stability when coring holes.
Milwaukee® 4120 Contractor Large Base Diamond Coring Stand, 120 VAC, 115.30 lb Steel Column Tool Weight
This contractor series large base stand features a cast aluminum base with 4 levelling screws for fast accurate levelling adjustment. The durable precision ground 2-1/2 in steel column is 43-1/2 in high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side.
Milwaukee® 4115 Small Base Stand Diamond Coring Rig
This contractor series small base stand features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment. The durable precision-ground 2-1/2 in. steel column is 43-1/2 in. high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side.
Milwaukee® 4096 Diamond Coring Motor With Clutch, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will handle core bits from 2 in. to 10 in. in diameter.
Milwaukee® 4094 Diamond Coring Motor, 450 to 900 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.
Milwaukee® 4090 Diamond Coring Motor, 375 to 750 rpm Speed, 2-1/2 hp, 120 VAC, Metal Housing, 15 A
Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 15 amp model provides core drilling power where 20 amp service is unavailable. This unit has a 375 RPM or 750 RPM operating speed. The 4090 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2-1/2 in. to 8 in. in diameter.
Milwaukee® 4079 Diamond Coring Motor, 300 to 600 rpm Speed, 4.8 hp, 120 VAC, Metal Housing, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 hp peak with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 to 14 in Dia.
Milwaukee® 4004-20 Diamond Coring Motor, 300 to 600 rpm Speed, 4.8 hp, 120 VAC, 20 A
Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.
Milwaukee® 3697-25 Fuel Cordless Tool, Tools: Hammer Drill/Impact Driver/Reciprocating Saw/Circular Saw/LED Work Light, 18 V, Li-Ion Battery, 1/2 inch Hammer Drill/1/4 inch Impact Driver/SAWZALL Reciprocating Saw/6-1/2 Circular Saw/LED work light
The Milwaukee M18 FUEL 5-Tool Combo Kit delivers users the most advanced 18-volt cordless drilling, fastening, and cutting technology in the industry. This Milwaukee 5 Tool Combo Kit features five M18 FUEL 18-Volt Lithium-Ion brushless cordless tools including a 1/2 in. Hammer Drill, 1/4 in. Impact Driver, SAWZALL Reciprocating Saw, 6-1/2 Circular Saw, and LED work light. M18 FUEL is fully compatible with the Milwaukee M18 18-volt cordless system, featuring over 250 solutions. M18 FUEL features the most advanced cordless technology in the industry a POWERSTATE Brushless Motor, REDLINK PLUS Intelligence, and REDLITHIUM Battery Technology, resulting in longer motor life, longer run time, and more power.
Milwaukee® 3697-22 M18 2-Tool Combination Kit, Tools: Hammer Drill, Impact Driver, 18 V DC, 5.0 Ah Battery Li-Ion Battery
The MILWAUKEE® M18 FUEL 2-Tool Combo Kit has the Most Powerful Drill, including AutoStop™ Control Mode for enhanced safety and the Fastest Driving Impact Driver. Includes an M18 FUEL 1/2" Hammer Drill, M18 FUEL 1/4" Hex Impact Driver, (2) M18 REDLITHIUM™ XC 5.0Ah Battery Pack, with an M18/M12 charger and carrying case. The M18 FUEL™ ½” Drill Driver is the Industry's Most Powerful Drill and Most Compact solution. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense materials for increased productivity and capability. At only 6.9” in length, this is the most compact drill in its class. The AutoStop™ Control Mode offers enhanced safety for the user by preventing over-rotation in a bind-up with the best reaction time in the industry. The M18 FUEL™ ¼” Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. The POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. The M18 FUEL™ 2-Tool Combo kit is part of the M18 system which is fully compatible with over 200+ solutions.
Milwaukee® 3696-22 M18 Cordless Tool Combo Kit, Tools: Hammer Drill, Impact Driver, 18 V, Lithium-ion Li-Ion Battery, 1/2 in Chuck Size, 33000 bpm, 0-2100 rpm Range
The MILWAUKEE® M18 FUEL™ 2-Tool Combo Kit with ONE-KEY™ has the highest performing Hammer Drill and Impact Driver in the industry with the added benefit of ONE-KEY™ technology. This combo kit has the Most Powerful Drill, including AUTOSTOP™ Control Mode for enhanced safety and the Fastest Driving Impact Driver. Includes an M18 FUEL 1/2" Hammer Drill, M18 FUEL 1/4" Hex Impact Driver, (2) M18 REDLITHIUM™ XC 5.0Ah Battery Pack, with an M18/M12 charger and carrying case. The M18 FUEL™ ½” Drill Driver is the Industry's Most Powerful Drill and Most Compact solution. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense materials for increased productivity and capability. At only 6.9” in length, this is the most compact drill in its class. The AUTOSTOP™ Control Mode offers enhanced safety for the user by preventing over rotation in a bind up with the best reaction time in the industry. The M18 FUEL™ ¼” Hex Impact Driver is the Most POWERFUL and FASTEST DRIVING impact driver, featuring ULTIMATE TRIGGER CONTROL. The POWERSTATE™ Brushless motor delivers unmatched power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with the fastest driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers ULTIMATE TRIGGER CONTROL by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials.
Milwaukee® 3692-22CT Compact Brushless Drill Driver Tool, 18 V, 2 Ah Battery Lithium-ion Li-Ion Battery, Metal Chuck Type, 1/2 in Chuck Size, 5.7 in Length, 7.95 in Height, 2.2 in Width, 1700 rpm Speed, 550 in-lb Torque
The MILWAUKEE® M18™ Compact Brushless 2-Tool Combo Kit is more compact with faster speeds in the application. Includes the M18™ Compact Brushless ½” Drill Driver, M18™ Compact Brushless ¼” Hex Impact Driver, (2) M18™ REDLITHIUM™ CP2.0 Battery Packs, M18™/M12™ Multi-volt Charger and Contractor Bag. The compact drill is 5.7” in length and lightweight at 2.3 lbs without a battery, allowing for excellent control, especially while working in overhead or tight spaces. The brushless motor was built to ensure optimal tool performance delivering 550 in-lbs of torque and 0-1,700 RPM, able to tackle a wide range of drilling and fastening applications. The impact driver measures only 4.4" in length and 2.1" in width, allowing for better access in tight spaces while being lightweight and portable. The brushless motor technology provides 1,700 in-lbs of torque and 3600 RPMs for faster speed and increased productivity. MILWAUKEE® REDLINK™ Intelligence optimizes the way the M18™ REDLITHIUM™ batteries work with the tools for best-in-class performance. These cordless tools have premium components, including an all-metal gear case and ½” metal chuck providing the durability that professionals require. The M18™ Compact Brushless 2-Tool Combo Kit is part of the M18™ system, fully compatible with over 250+ solutions.
Milwaukee® 3670-20 M18 FUEL™ Braking Small Grinder, 6 in Dia Wheel, 5/8-11 in Arbor/Shank, 18 V, Lithium Battery, Paddle Switch
The MILWAUKEE® M18 FUEL™ 4-1/2" / 6" Braking Grinder Paddle Switch, No Lock is the next advancement in power and performance, generating 13A corded power, fastest cutting, and delivering up to 135 cuts per charge. The M18 FUEL™ 4-1/2" / 6" Braking Grinder generates 13A corded power allowing you to complete the toughest grinding and cutting applications, all on the M18™ Cordless System. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 9,000 RPM to remove material faster and increase productivity. REDLINK PLUS™ Intelligence ensures unmatched levels of performance, protection, and compatibility. The RAPIDSTOP™ Brake provides stop times under 2 seconds with an abrasive disc. The M18 FUEL™ 4-1/2" / 6" Braking Grinder includes an electronic clutch for kickback protection, as well as overload protection to maximize motor life. Pair with the M18™ REDLITHIUM™ FORGE™ XC8.0 Battery Pack for HIGH OUTPUT™ HD12.0 power in a smaller size, and longest life vs. REDLITHIUM™ batteries. The M18 FUEL™ 4-1/2" / 6" Braking Grinder takes cordless grinders to the next level in performance and run-time.
Milwaukee® 3651-20 Compact Brushless Hex Impact Driver, 1/4 in Drive Hex Drive, 0 to 4900 bpm, 1700 in-lb Torque Rating, 18 V, 4.4 in OAL
The MILWAUKEE® M18™ Compact Brushless ¼” Hex 3-Speed Impact Driver is more compact and more capable. Measuring only 4.4" in length and 2.1" in width, the compact size allows for better access in tight spaces while being lightweight and portable. The 3-Mode Drive Control™ provides greater control over output speed and power. The brushless motor technology provides 1,700 in-lbs. of torque and up to 3600 RPMs for faster speed and increased productivity. MILWAUKEE® REDLINK™ Intelligence optimizes the way the M18™ REDLITHIUM™ batteries work with the impact driver for best-in-class performance. Premium components and an all metal gearcase provide durability that professionals require. The Compact Brushless ¼” Hex 3-Speed Impact Driver is part of the M18™ system, fully compatible with over 250+ solutions.
Milwaukee® 3650-22CT Compact Brushless Hex Impact Driver Kit, 1/4 in Drive Hex Drive, 4900 bpm, 1700 in-lb Torque Rating, 18 V, 4.4 in OAL
The MILWAUKEE® M18™ Compact Brushless ¼” Hex Impact Driver is more compact with faster driving speeds. Measuring only 4.4" in length and 2.1" in width, the compact size allows for better access in tight spaces while being lightweight and portable. The brushless motor technology provides 1,700 in-lbs of torque and up to 3600 RPMs for faster speed and increased productivity. MILWAUKEE® REDLINK™ Intelligence optimizes the way the M18™ REDLITHIUM™ batteries work with the impact driver for best-in-class performance. Premium components and an all metal gearcase provide durability that professionals require. This kit includes the M18™ Compact Brushless ¼” Hex Impact Driver, (2) MILWAUKEE® M18™ REDLITHIUM™ CP2.0 Battery, (1) MILWAUKEE® M12™/M18™ Multivolt Charger, and (1) Contractor Bag. The Compact Brushless ¼” Hex Impact Driver is part of the M18™ system, fully compatible with over 250+ solutions.
Milwaukee® 3650-21P Compact Brushless Driver, 1/4 in Drive Hex Drive, 1700 in-lb Torque Rating, 18 V
The MILWAUKEE® M18™ Compact Brushless ¼” Hex Impact Driver is more compact with faster driving speeds. Measuring only 4.4" in length and 2.1" in width, the compact size allows for better access in tight spaces while being lightweight and portable. The brushless motor technology provides 1,700 in-lbs of torque and up to 3600 RPMs for faster speed and increased productivity. MILWAUKEE® REDLINK™ Intelligence optimizes the way the M18™ REDLITHIUM™ batteries work with the impact driver for best-in-class performance. Premium components and an all-metal gear case provide the durability that professionals require. This hammer drill kit includes (2) MILWAUKEE® M18™ REDLITHIUM™ CP2.0 Battery, (1) MILWAUKEE® M12™/M18™ Multivolt Charger, (1) Contractor Bag. The Compact Brushless ¼” Hex Impact Driver is part of the M18™ system, fully compatible with over 250+ solutions.
Recently Viewed
3/4"-HUB 2-GANG ALUMINUM DEVICE BOX - APLFD275A>
10 GROOVE G-BUSH POLY-V BELT SHEAVE 2.24X1-3/4"-BRW10J22G >
Proto® TorquePlus™ J5316 Deep Length Socket, Imperial, 1/2 in Square Drive, 1/2 in
1/4" BLACK STEEL COUPLING-FIT1/4BSC >
DOUBLE-V V-BELTS-BRWBB180>
30" STEELGRIP FASTENERS-4 SET PER BOX-COV3530 >
