Milwaukee Tool

The M18™ cordless system's patented technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. Powered by REDLITHIUM™, the M18™ cordless system delivers more torque, more power and longer runtime than the competition.

1/2" HAMMERDRILL/DRIVER/IMPACT KIT-MWK279722>

The M18™ FUEL™ 2-tool combo kit is the highest performing hammer drill and impact driver combo kit on the market. Included is the M18™ FUEL™ hammer drill (2704-20), the most powerful 18 V cordless drill on the market. Delivering up to 1200 in-lb of torque and up to 2000 rpm, it provides faster drilling speed under heavy load to increase productivity. Also included is the M18™ FUEL™1/4 in hex impact driver (2753-20), the most powerful impact driver in its class. At 1800 in-lbs of fastening torque, this impact drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. M18™ FUEL™ features the most advanced cordless technology available A POWERSTATE™ brushless motor REDLINK™ Plus™ electronic intelligence and REDLITHIUM™ battery technology, resulting in longer motor life, more runtime and more power.

Milwaukee® 2997-22J M18™ Fuel 2-Tool Power Tool Combination Kit, Tools: Hammer Drill Driver/Impact Driver, 18 VDC

Get maximum performance from your Milwaukee® Selfeed drill bits in soft woods and plywood with the coarse thread feed screw. The 1/4 in. replacement feed screw is designed for Selfeed bits sized 1 in. to 2-9/16 in..use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.

Milwaukee® close quarters tubing cutters are optimized for tough cuts in tight spaces. The compact design allows access to the tightest spaces. Chrome rollers deliver best in class rust protection while integrated weep holes allow water to drain from the tool. Directional grip allows better handling and quick identification of swing direction for easy use. Includes 1/2 in., 3/4 in., and 1 in. cutters and a storage case.

The Milwaukee® M18 FUEL™ rear handle 7-1/4 in. circular saw is designed for the professional carpenter, remodeler, and general contractor. The circular saw generates the power of 15 amp corded saws, cut faster than 15 amp corded saws and delivers up to 570 cuts per charge with an M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery. The POWERSTATE™ brushless motor provides this worm drive style saw with 5,800 RPM and higher speeds under load, delivering corded cutting performance. REDLINK Plus™ intelligence lets the tool achieve maximum performance and protects the circular saw from overload, overheating and over discharge. The M18 REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery (not included) is compatible with all M18™ tools, runs 50% cooler, and delivers unmatched run times and 50% more power. The cordless circular saw has an electric blade break, LED work light, and all magnesium guards and shoe, increasing productivity and providing the durability to handle the toughest jobs. A multi-sized rafter hook allows the handheld circular saw to be stored on different materials. The saw's gears don’t require oiling and maintenance reducing downtime and getting jobs done faster.

Milwaukee® electric tool Corporation introduces the new M18™ cordless Li-ion 5-3/8 in metal saw. This compact and lightweight metal cutting saw delivers the fastest cuts for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 2682 utilizes an exclusive 4-pole frameless motor for up to 35% more cutting power and best in class run time with over 200 cuts of 3/4 in EMT per charge. The Milwaukee® M18™ cordless Li-ion 5-3/8 in metal saw features a compact, low profile design for easy handling and increased control. At only 5.8 lb, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The extra-large cut guide, impact resistant window and led light ensure superior line of site and the stainless steel shoe reduces chip build up to prevent surface marring. The 2682 cordless metal saw features a metal TECH™ 5-3/8 in 30T carbide tipped metal saw blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by Milwaukee® 5 year warranty the 2682-22 comes equipped with (2) M18™ XC high capacity REDLITHIUM™ battery packs, 30T 5-3/8 in metal TECH™ carbide tipped metal saw blade, blade wrench, 1 hr charger and contractor bag.

Milwaukee® electric tool Corporation introduces the new M18™ cordless Li-ion 5-3/8 in metal saw. This compact and lightweight metal cutting saw delivers the fastest cuts for the electrical, mechanical, plumbing, HVAC and general construction contractor. The 2682 utilizes an exclusive 4-pole frameless motor for up to 35% more cutting power and best in class run time with over 200 cuts of 3/4 in EMT per charge. The Milwaukee® M18™ cordless Li-ion 5-3/8 in metal saw features a compact, low profile design for easy handling and increased control. At only 5.8 lb, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The extra-large cut guide, impact resistant window and led light ensure superior line of site and the stainless steel shoe reduces chip build up to prevent surface marring. The 2682 cordless metal saw features a metal TECH™ 5-3/8 in 30T carbide tipped metal saw blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials.

CHUCK KEY HOLDER-MWK48664020 >

CHROME PLATED BRASS SPRAYERS-MWSA2000>

18-V/28-VOLT CORDLESS BATTERY CHARGERS-MWK48592818 >

The M12™ compact charger and power source provides convenient, on-the-go charging for all M12™ batteries both on and off the jobsite. Using the included jobsite tough micro-USB cable and 2.1A wall plug, the compact charger expands the portability of all M12™ products. When not near an outlet, the compact charger is compatible with any USB output, including in-vehicle USB ports. Delivering additional functionality, the M12™ compact charger and power source combines with any M12™ battery to provide fast, portable charging for electronic devices. It can also be used to power all models of M12™ heated gear for increased functionality. Designed to maximize the versatility of the M12™ system, the multi-function M12™ compact charger and power source provides convenient portable charging for batteries and devices.

Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.

CHAIN SPROCKET KIT-MWK14461175 >

Replacement pilot bit for use with arbor model 49-57-0035 which can be used for both steel plate and sheet metal Carbide tipped hole saws. This bit is standard equipment.

Replacement plunger rod for model 6560 and 6562 Milwaukee caulk gun when set up to use the quart size tube/carriage.

The MILWAUKEE® Carbide Hole Cutter Pilot Bit features carbide teeth for longer life and smooth cuts in stainless steel and other hard metals. Each cutter features a stop shoulder design that prevents over-drilling and limits cuts to a 3/16 in. depth, while a 3-flat shank optimizes each cutter drill bit for use in Drill/Drivers. The spring-loaded pilot bit provides complete plug ejection for clean, efficient cutting of each hole. The solid one-piece design of each hole cutter provides added durability and dependability cut after cut.

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.

Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt logic ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The bulldog version is ideal for tough cuts.

Milwaukee® 22-18-0040 Carbon Brush Assembly, For Use With 9075-20 Serial 239D 3/4 in D.I. Impact Wrench, 9070-20 1/2 in D.I. Impact Wrench

Milwaukee® 22-22-1560 Carbon Brush Assembly, For Use With 6148-33/6140-33 Serial B70A 4-1/2 in Angle Grinder with Slide Switch

Milwaukee® 22-20-0691 Left Brush Holder, For Use With 6880 Serial 630B 10 AWG, 6890-2 Serial 734A 16 AWG Nibbler