Milwaukee Tool
Milwaukee P2" GUIDE PLATES MWK 48-20-6157
Use with 48-20-6155 center pin and 48-20-5035 thin wall core bit.
Milwaukee P2-1/2" GUIDE PLATES MWK 48-20-6158
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee OFFSET DRIVE ADAPTERS MWK 48-32-2100
Use the power and speed of your 2.4 V cordless screwdriver to fasten or remove screws in light applications up to 400 rpm. A durable die cast construction accepts 1/4 in magnetic bits. The thumb flange allows 360 deg rotation. Achieves a maximum of 100 in-lb torque.
Milwaukee NYLON BRISTLE VACCUM NOZZLES MWK 49-90-0760
The heavy duty nylon bristle brush has a cast aluminum body for durability and a wide mouth for fast dust pickup. It offers a 10 in cleaning path. Compression fits a 1-1/2 in ID Hose.
Milwaukee NUTDRIVERS--USE "MWK" 48-22-2554
Milwaukee® HollowCore™ Magnetic nut drivers feature a thread-thru design for unlimited depth in threaded rod and long bolt applications. The magnetic universal driver heads fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee NUTDRIVER SET-USE "MWK" 48-22-2547
Milwaukee® 7 pc. SAE HollowCore™ magnetic nut drivers feature a thread-thru design for unlimited depth in threaded rod and long bolt applications. The magnetic universal driver heads fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee NUTDRIVER SET-USE "MWK" 48-22-2448
Milwaukee® 7 pc. Metric hollow shaft nut drivers feature universal driver heads which fit 4X more fasteners including: square, hex, 12 point & spline. Designed for maximum durability the wrench ready hex steel shanks are forged and chrome plated. Milwaukee nut drivers are designed for the jobsite and include Milwaukee's Limited Lifetime Warranty.
Milwaukee NARROW CHISELS MWK 48-62-4005
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee MOTOR/TOOL BRUSH SETS MWK 22-18-0800
Milwaukee® 22-18-0800 Brush Service Kit, For Use With 5366-1 Serial 793D 3/4 in Rotary Hammer
Milwaukee MILWAUKEE BRANDED RED BEANIE MWK 502-R
The Milwaukee® fleece lined knit hat features a fleece band around the ears to block wind and provide extra warmth in cold conditions. Beanie style construction allows for easy use under a hard hat. Durable 98% polyester, 2% spandex construction resists snagging and manages moisture to help prevent sweating and overheating. Product intended for cold weather use.
Milwaukee MENS XXL BLACK HEATED JACKET KITS MWK 2171-XXL
MEN'S XXL JACKET WITH HEATED KIT-MWK2171XXL>
Milwaukee MED CUT-LEV-3 NITRILE GLOVES MWK 48-22-8971
The MILWAUKEE® Large Impact Cut Level 3 Nitrile Gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These nitrile coated gloves have impact rated enhanced TPR added to the back of the hand for added protection. The dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high wear points. They are 18 gauge for high dexterity when handling small objects and have SMARTSWIPE™ touchscreen compatible fingertips to access devices without taking off gloves.
Milwaukee MASONRY BITS--USE "MWK" 48-20-9045
Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.
Milwaukee MASONRY BITS--USE "MWK" 48-20-904
Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.
Milwaukee MAJOR FLOOR TOOLS MWK 49-90-0550
The major floor tool accommodates interchangeable 14 in. inserts and replacements. Two quick turn thumb screws make changing attachments quick and easy. Supplied with bumper 49-90-0610 to protect furniture and walls from bumps and scratches. Attaches to double bend floor wand 49 to 90 - 1000.
Milwaukee MAGNETIC PRESS DRILL MOTORS MWK 4253-1
Lightweight with ample power, the 1/2 in. electromagnetic drill press motor is ideal for drilling small holes into steel. At just 8 Lbs., this lightweight 6.2 amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 Lbs. of drill point pressure with a 1 in. steel plate. This unit features a 1/2 in. chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.
Milwaukee MAGNETIC DRILL PRESSES MWK 4210-1
This combination unit features the 4202 fixed position variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee MAGNETIC DRILL PRESSES MWK 4209-1
This combination unit features the 4203 adjustable position, variable speed base and the 4292-1 1-1/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker.
Milwaukee MAGNETIC DRILL PRESS STANDS MWK 4202
The 4202 electromagnetic variable speed base features solid state electronic switching and a 9 in. drill travel. Feedback speed control maintains speed and a motor/magnet lockout prevents demagnetization during operation. For use on any flat ferrous material, 1/2 in. and thicker.
Milwaukee MAGNETIC DRILL PRESS MOTORS MWK 4297-1
This heavy duty unit is built for production drilling and will take the toughest drilling jobs. Model 4297-1 features an 11.5 amp motor with a no.3 morris taper chuck. This two speed unit has 250 and 500 RPM, geared low for maximum torque. Use the larger 4203 adjustable base for this powerhouse, and no job is too large.
Milwaukee MAGNETIC DRILL PRESS BASES MWK 4203
The 4203 electromagnetic variable speed adjustable base features solid state electronic switching and an 11 in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. The 4203 offers adjustably of 3/4 in. in direction of base length front-to-back and 20 deg right or left of center. Line feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2 in. and thicker.
Milwaukee M3 ARBOR ADAPTER FOR 4208-2/4209-1 MWK 49-57-0025
No. 3 Morse taper assembly to fit Milwaukee annular cutters 3/4 in. shank.
Milwaukee M-28 C/LESS METAL SAW KITS MWK 0740-22
Milwaukee® 28 V 6-7/8 in metal cutting saw, 0740-20, cuts all types of metals such as uni-strut, galvanized pipe, metal studs and black pipe, as well as Hardi-Plank and Durock materials. The saw has a 2-7/16 in maximum depth of cut. The blade spins at 3200 rpm and has an electric brake for quick, repetitive cutting. An LED light and clear guard provides an excellent line of sight for cutting and the rugged construction provides long, trouble-free operation.
Milwaukee LRG CUT-LEV-3 NITRILE GLOVES MWK 48-22-8972
The MILWAUKEE® Large Impact Cut Level 3 Nitrile Gloves are ANSI/ISEA Impact Level 2 Rated, and ANSI Cut Level 3 Rated. These nitrile coated gloves have impact rated enhanced TPR added to the back of the hand for added protection. The dipped gloves have a reinforced nitrile coating between the thumb and index finger for enhanced durability in high wear points. They are 18 gauge for high dexterity when handling small objects and have SMARTSWIPE™ touchscreen compatible fingertips to access devices without taking off gloves.
Recently Viewed
7/16" X 5-1/2" USS Socket Head Capscrew
5/8" X 1-3/4" SAE Socket Head Capscrew
1/4" X 1/2" LO/HEAD SOCKET HEAD CAPSCREW-NBS7070250050 >
BBI 755054 Medium Split Lock Washer, 1/2 in Nominal, 316 Stainless Steel
3/8" X 1-1/4" LO/HEAD SOCKET HEAD CAPSCREW-NBS7070380125 >
