Klein Tools
KLEIN TOOLS 5190 10-Pocket Tool Pouch
Ten separate compartments with places for a wide variety of pliers, screwdrivers and other tools
Stitched and riveted leather construction for long life
Includes ring and slotted-leather tape thong
Slotted to fit belts up to 1-3/4-Inches (44 mm) wide
KLEIN TOOLS 5178 8-pocket Electricians Pouch
Durable black leather pouch designed for electricians, service techs, and maintenance workers
Five large utility pockets and three screwdriver and plier pockets for easy organization
Tape rule holder on the front for added convenience
Fits most belts up to 2.5 inches wide for easy transport
Riveted and stitched for extra durability, ensuring long-lasting use
Includes a knife snap and heavy-duty chain tape thong for secure tool fastening
Made with soft, pliable, moisture-resistant black leather and features a tunnel loop belt connection for added stability
Made in the USA
KLEIN TOOLS 5102-18 18" Canvas Tool Bag, 18-Inch
Heavy-duty No. 8 natural canvas tool bag
Rivet-reinforced for durability
Steel-frame mouth with hinge for rugged use
Stitched and riveted leather handles for comfort and strength
Two retaining straps with buckles provide secure closure
Moisture resistant vinyl bottom with non-scratch feet to protect against wear
Retro-fit bags with shoulder strap kit (Cat. No. 5102S). Kit includes leather strap with pad and snap hooks, rings and fasteners for attaching rings to bags
KLEIN TOOLS 50500 Ratcheting PVC Cutter 1/2'' 1-1/4''
Makes clean, burr-free cuts through PVC.
High-leverage ratchet-action for maximum cutting power.
Easy one-hand cutting.
Special heat-treated blades stay sharp longer and reduces pipe deformation.
Hooked jaw holds pipe in proper cutting position.
KLEIN TOOLS 50221 SPEEDWAY 240 FLAT STEEL FISH TAPE 240 FOOT X 1/8
HEAVY DUTY FLAT-STEEL FISH TAPE W/ REEL 240'
KLEIN TOOLS 50211 Speedway Flat-Steel Fish Tape Cable Puller 120 Feet
120' FISHTAPE WITH REEL
KLEIN TOOLS 5003-18 18" Tool Bag, Canvas with Leather Bottom, 11 Pockets, 18-Inch
Tool bag with steel frame mouth with hinge for rugged use
Organize tools using internal pockets in a variety of sizes
External pocket for additional carrying needs
Constructed of strong No. 8 natural canvas
Wide opening provides easy access to large tools
Bottom is protected from the elements by 6 studs
Includes shoulder strap mounts, external pocket, leather bottom and 3-Inch (76 mm) of sides covered with black leather, 2-Inch (51 mm) wide web handles, leather handle wrap, and external tool loop handle in the webbing
Klein Tools 5/16" HEX NUTDRIVERS KLE 630-5/16
Klein has the nut drivers professionals demand to get the job done. The full hollow shaft facilitates work on stacked circuit boards or other long bolt applications. Premium chrome-plated for smooth feel and corrosion resistance. The handle end is color coded for easy identification. The patented Tip-Ident® quickly identifies nut driver and size.
KLEIN TOOLS 44004 Lightweight Lockback Knife 2-1/2-Inch Sheepfoot Blade, Black Handle
Blade is AUS8 stainless
Premium quality blade offers superior edge holding
Impact-resistant nylon resin handle with rubber insert
Reversible thumb stud provides easy one-handed opening
Lockback secures blade open
Compact design for easy carrying
Lanyard hole for tethering
KLEIN TOOLS 44001 Lightweight Lockback Knife Features A 2-1/2" Long Chrome Drop-point Blade That Is Aus 8" Stainless Steel Hardened To 58-59 Rc.
LIGHTWEIGHT LOCKBACK KNIFE FEATURES A 2-1/2" LONG CHROME DROP-POINT BLADE THAT IS AUS 8" STAINLESS STEEL HARDENED TO 58-59 RC
KLEIN TOOLS 3258 1-3/16" X 12" Top/dia Bull
Machined from quality alloy steel
Standard design offers greater initial economy, but no added protection against mushrooming
Heat-treated for strength
Black finish for rust resistance
Made in USA
KLEIN TOOLS 32460 Multi-Bit Screwdriver, 4-in-1, Ph Bit #1, #2, Sl Bits 3/16-Inch, 1/4-Inch, 7-Inch
Multi-bit screwdriver with interchangeable, versatile snap-in blades
Tool supplied with four different tips on two reversible blades
Made of quality steel
7-Inch length
Made in USA
KLEIN TOOLS 3231 15/16" Spud Wrench, 15/16-Inch Nominal Opening for Utility Nut
Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
Extra heavy-duty head area gives maximum strength and durability
Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
Extra-large hub area works on larger diameter holes than other wrenches
Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
American Bridge design
KLEIN TOOLS 3223 1-5/16" Spud Wrench, 1-5/16-Inch Nominal Opening for Regular Nut
Forged in the USA from select US alloy steel to withstand high-leverage and heavy loads
Extra heavy-duty head area gives maximum strength and durability
Continuous taper of handle makes lining-up bolt holes easy and works on a range of bolt and/or hole sizes without binding
Extra-large hub area works on larger diameter holes better than other wrenches
Catalog number, bolt size and nominal opening size are stamped on every wrench for easy identification
American Bridge design
KLEIN TOOLS 3146-B Bell System Type Wrench
Similar to standard lineman's wrench, but with end openings sized to NEMA hardware specifications
Silver painted finish
Large end has 1-1/16-Inch and 1-3/16-Inch openings
Small end has 11/16-Inch and 7/8-Inch openings
Made in the USA
KLEIN TOOLS 19352 Conduit Reamer
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
KLEIN TOOLS 19325 Conduit Reamer
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
KLEIN TOOLS 19312 1-3/32" Steel Mini-gato Clipsr
1-3/32" STEEL MINI-GATOR CLIPS
KLEIN TOOLS 1628-17 Grip for High Strength Cables 0.5 to 0.75-Inch
Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick
KLEIN TOOLS 1604-20 Haven's® Cable Grip 0.5-Inch Capacity
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability
KLEIN TOOLS 1570-3Cable Skinning Hook Blade with Notch
No contact between stainless steel ring and hardened steel blade; blade and ring are securely molded in handle
Three-inch steel blade withstands frequent scoring and slitting of cable jacket
Notch on blade back for scraping or removing wire insulation
Comfortable textured handle with finger grooves and guard
Made in USA
Leather sheath available, Cat. No. 5163
Recently Viewed
15/16" -IDX1-5/16" -OD O-RINGS
