Klein Tools

Standard length for most applications; full hollow shaft fits over long bolts and studs
Internal flanges provide solid, twist-resistant shaft anchor
Handle end is also color coded for easy identification
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies nut driver and size
Cushion-Grip™ handle allows for greater torque and comfort

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.

Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size

Standard length for most applications; fits over long bolts and studs
Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications
Internal flanges provide solid, twist-resistant shaft anchor
Premium chrome plated for smooth feel and corrosion resistance
Made in USA
Meets or exceeds applicable ASME / ANSI specifications
Handle end is also color coded for easy identification
Cushion-Grip™ handle allows for greater torque and comfort
Tip-Ident® quickly identifies nut driver and size

Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.

Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20

Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32

Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24

Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Plastic coated for circuit protection only. NOT INSULATED.
Special plastic coating resists cutting, cracking, and chipping.
Thin coating permits use in confined areas.
Cushion-Grip™ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Meets or exceeds applicable ASME / ANSI specifications.
Tip-Ident® quickly identifies the screwdriver type and tip orientation.

Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Plastic coated for circuit protection only. NOT INSULATED
Special plastic coating resists cutting, cracking, and chipping
Thin coating permits use in confined areas
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Made in USA
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Precision machined tip provides exact fit for terminal block screws
1/8-Inch (3.2 mm) cabinet tip is up to 19-Percent stronger than competitors
Tip provides 76-Percent higher torque value than the required ASME B107 Standard
Cushion-Grip™ handle offers greater torque comfort

Precision formed tip provides an exact fit for small screw applications
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Special heat-treated shafts
Made in USA
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches
Bends 10, 12 and 14 AWG wire
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Meets or exceeds applicable ASME / ANSI specifications

Precision-machined tip provides accurate fit and torque without slippage
Tip-Ident® quickly identifies the screwdriver type and tip orientation
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Meets or exceeds applicable ASME / ANSI specifications

1000V rated for safety.
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools.
Cushion-Grip™ handles for greater torque and comfort.
Custom US-made steel.
This has been discontinued and replaced with Cat. No. 633-4-INS.

Metal stud offers a convenient and easy way to bend, loop and connect solid wire when installing outlets and switches.
Cushion-Grip™ handle for greater torque and comfort.
Premium chrome-plated for smooth feel and corrosion resistance.
Internal flanges inside handle provide solid, twist-resistant blade anchor.
Special heat-treated shafts.
Precision-machined tip for exact fit.
Tip-Ident® quickly identifies the screwdriver type and tip orientation.
Meets or exceeds applicable ASME / ANSI specifications.

5/16" X 6" INSULATED SCREWDRIVER

Built to handle the tough jobs with ease
Hex bolster reinforces shank for hard use and allows wrench assisted turning
Cushion-Grip™ handle for greater torque and comfort and premium chrome-plated for smooth feel and corrosion resistance
Internal flanges inside handle provide solid, twist-resistant blade anchor
Made in USA
Special heat-treated shafts
Precision-machined tip for exact fit
Meets or exceeds applicable ASME / ANSI specifications
Tip-Ident® quickly identifies the screwdriver type and tip orientation

Two layers of insulation provide protection against electric shock.
Klein insulated tools are individually tested to exceed IEC 60900 and ASTM F1505 standards for insulated tools.
Custom US-made tool steel.
Cushion-Grip™ handle for superior torque and comfort.
This item has been discontinued and replaced by the 601-7-INS.

2-3/8" STEEL ALLIGATOR CLIPS (EA)

Klein Tools 5715S Cordura® Fabric Metal Belt Clip Small Mobile Phone Holder 4-1/2-Inch x 2-5/8-Inch Black PowerLine.
You can give yourself quick and easy, on-the-job access to your cellular phone with the Klein Tools Powerline Small Mobile Phone Holder. This durable pouch is double layered and is made from 1000-denier Cordura nylon. It features a metal clip that fits most belts up to 2-Inch wide, and a closable touch fastener strap.