Jason Industrial
JASON 360H200 SYNCHRONOUS BELT, 1/2 " PITCH; 36" PITCH LENGTH;2" BELT WIDTH. 72 TEETH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS360H200 >
JASON 367L050 3/8-" L PITCH STANDARD TIMING BELT. 36.7 " PITCH LENGTH, 98 TEETH 12.7 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS367L050 >
JASON 3755M15 5MM PITCH, 3.8MM HEIGHT, 15MM WIDTH, 375MM LENGTH, TEETH;75
A HARD WEATING, FLEXIBLE TOP SURFACE PROTECT TENSION CABLES. TENSION CABLES MADE IN CONTINUOUS HELICALLY GLASS FIBER. PROTECTIVE COVER FABRIC WITH A LOW COEFFICIENT OF FRICTION, IN ORDER TO ACHIEVE MINIMUM WEAT ON THE CONTACT SURFACES AND MINIMIZE NOISE. GOOD RESISTANCE TO OILS AND GREASES.
-JAS3755M15 >
JASON 380J6 MICRO-V BELT, J SECTION, 380J SIZE, 38" LENGTH, 4/7" WIDTH, 6-RIB
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS380J6 >
JASON 3843M09 HDT TIMING BELT 384-MM PITCH LENGTH
BELT IS 384MM PITCH LENGTH, 128 TEETH, PITCH:3MM WIDTH;09, TOTAL HEIGHT 240MM, TOOTH HEIGHT:1.22 MM
-JAS3843M09 >
JASON 3843M15 HTB TIMING BELT, SINGLE SIDED, 3MM PITCH, 384 MM PITCH LENGTH, 128 TEETH
THE STANDARD TRAPEZOIDAL TOOTH TIMING BELT DESIGN PERFORMS POORLY IN HIGH TORQUE APPLICATIONS AND HIGH-POWER DRIVES AT LOWER SPEEDS. TO OVERCOME THIS DISADVANTAGE THE HIGH TORQUE BELT (HTB) WAS DEVELOPED USING A MORE EFFICIENT TOOTH PROFILE. OIL, HEAT AND ABRASION-RESISTANT
-JAS3843M15 >
JASON 3850-14-M-120 SYNCHRONOUS BELT; 14 MM PITCH; 3850 MM PITCH LENGTH; 120 MM BELT WIDTH; STANDARD HTD TOOTH PROFILE; 14M
FIBERGLASS TENSILE CORD-HIGH DIMENSIONAL STABILITY AND MAXIMUM FLEXIBILITY. OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER, MADE OF POLYURETHANE
- JAS385014M120>
JASON 390-H-150-U H-PITCH X 39" URETHANE TIMING BELT
ABRASION-RESISTANT POLYURETHANE BODY OFFERS CLEAN RUNNING SYSTEMS WITHOUT ACCUMULATION OF DEBRIS. SYNCHRO-POWER ENDLESS BELTS AND SLEEVES FOR POWER TRANSMISSION ARE MANUFACTURED AS TRULY ENDLESS SYNCHRONOUS BELTS WITH NO JOINT. EXCEPTIONAL RIGIDITY, REDUCED TOOTH FLEXING AND EXCEPTIONAL STABILITY IN THE OVERALL SYSTEM WITH NO LUBRICATION REQUIRED-JAS390H150U>
JASON 390H100 SYNCHRONOUS BELT, 1/2 " PITCH; 39" PITCH LENGTH ;1" BELT WIDTH.78 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390H100 >
JASON 390H150 SYNCHRONOUS BELT, 1/2 " PITCH; 39" PITCH LENGTH ;1-1/2" BELT WIDTH.78 TEETH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390H150 >
JASON 390J6 MICRO-V BELT, J SECTION, 390J SIZE, 39" LENGTH,.552 " TOP WIDTH, .138 " THICK. 6 RIBS
HIGH FLEXIBILITY RUNS ON SMALL DIAMETER PULLEYS, SPEED RATIOS UP TO 60:1, MULTIPLE RIB CONSTRUCTION-ELIMINATED TURNOVER, ONE BELT PER DRIVE, REDUCED NOISE AND VIBRATION. POLYESTER TENSILE CORD PROVIDES HIGHPOWER CAPACITY, LOW STRETCH.
-JAS390J6 >
JASON 390L050 3/8-" L PITCH STANDARD TIMING BELT. 39-" PITCH LENGTH, 98 TEETH 12.7 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. COMFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH, THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
-JAS390L050 >
JASON 390L100 3/8-" L PITCH STANDARD TIMING BELT. 39-" PITCH LENGTH, 104 TEETH 1 MM WIDTH
SYNTHETIC RUBBER TIMING BELT. CONFORMS TO RMA ENGINEERING STANDARD. TIMING BELTS ARE MEASURED BY LENGTH, TOOTH PITCH, THEN WIDTH. THE FIRST NUMBER IS THE LENGTH; THE LETTER AND SOMETIME NUMBER REFER TO THE TOOTH AND THE FINAL NUMBER IS THE WIDTH. STANDARD TIMING TOOTH PROFILE, H; FIBERGLASS TENSIILE MATERIAL; RUBBER OUTER MATERIAL
JAS390L100 >
JASON 3L 270 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 27" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
AS3L270 >
JASON 3L170 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 17" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
JAS3L170 >
JASON 3L190 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 19" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L190 >
JASON 3L200 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 20" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L200 >
JASON 3L210 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 21" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L210 >
JASON 3L220 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 22" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L220 >
JASON 3L260 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 26" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L260 >
JASON 3L300 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 38" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
JAS3L380 >
JASON 3L340 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 34" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L340 >
JASON 3L350 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 35" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L350 >
JASON 3L360 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 36" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L360 >
Recently Viewed
HEATER BEATER HOT MILL GLOVES. PACKAGE OF 12-GLV9136KDOZ >
88504 single-row, deep-groove radial ball bearing that features an extended inner ring and double felt seals.
• Bore Diameter (Inner ID): 20 mm
• Outside Diameter (Outer OD): 47 mm
• Inner Ring Width: 17.75 mm (0.6988 in)
• Outer Ring Width: 14.00 mm (0.5512 in)
• Enclosure: Double sealed (historically felt, modernly rubber)
3-MM x 3-MM x 12" Keystock
3" PONY SPRING CLAMP-JWH317703 >
20-MM x 2.50 x 75-MM 10.9 Hex Head Capscrew
8-MM x 1.25 x 12-MM Hex Head Capscrew
