HCI PREFERRED SUPPLIER
3.75"-ODX5.50"-L CUSTOM SPRINGS-WBJ0185SPECIAL >
Type: Round Bend U-Bolt with two hex nuts Material: Low carbon steel Finish: Zinc-plated (Part #50080-7) or Hot Galvanized (Part #53080-4) Thread Size: 3/8"-16 UNC Inside Width: 1-1/2 in Inside Length: 2-1/2 in Thread Length: 1-1/4 in Pipe Size: 1 in
SIZE 6/7 SMALL SHOE COVER-WIK02 >
3/16" -1/4" FUEL LINE HOSE CLAMPS-MED02040 >
CABLE SWIVEL STOPS-MED02099 >
10" BIT BRACE-STA02660 >
MINI IDENTIFICATION ID CLIPS-WCC0200205 >
E CLIP 1/2"-SIL02002 >
AIR CONDITIONER WEATHERSTRIP-M-D02006 >
E CLIP 7/8"-SIL02009 >
21 SPLINE SNAP HITCH PIN KIT-GGM02010321 >
FOAM WEATHERSTRIP-M-D02022 >
FOAM TAPE 3/16X3/8X17'-M-D02055 >
FOAM TAPE 1/4X1/2X17'-M-D02071 >
FOAM TAPE 3/8X1/2X17'-M-D02097 >
24" PIPE WRENCHES-RPT02099>
1-GAL PLASTIC CAN ORANGE HAND SOAP-SBS02104 >
6" HEAVY DUTY PIPE WRENCHES-RPT02110 >
1/2" TEEX3/4" WX17' FOAM TAPE-M-D02113 >
JUMBO JR TOILET TISSUE--CS/12-SCO02129 >
Thread Size: 3/8"-16Inside Width: 2-1/2 inches Inside Length: 3-1/8 inches Material: Low carbon steel Finish: Zinc plated (also available in stainless steel configurations)
FASTENERS WITH PIN (" CLI" 4G)-COV02217 >
Thread/Diameter (A): 3/8"-16Pipe Size: 3 inches Inside Width / Inner Diameter (C): 3-5/8 inches Inside Length (B): 2-1/2 inches Thread Length (T): 1-1/4 inches Finish: Hot Galvanized (HG) with two hex nuts included Weight: 26 lbs. per 100 pieces
CAMPER INSULATION TAPES-M-D02352 >
Recently Viewed
3/8" X 1-3/4" SAE Stainless Steel Hex Head Capscrew
Littelfuse® POWR-GARD® LFT602003CS Fuse Block, 600 V AC, 200 A, Class: T, 6 AWG to 250 kcmil Wire, 3 Poles
The new Littelfuse® class T fuse blocks offer many advantages over previous generations that are noted in the features and benefits section. Of particular value is the space savings these new blocks provide.
GEARWRENCH® 81675 Long Length Open End Combination Wrench, 18 mm Wrench, 12 Points, 15 deg Offset, 269 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81674 Long Length Open End Combination Wrench, 17 mm Wrench, 12 Points, 15 deg Offset, 260 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81676 Long Length Open End Combination Wrench, 19 mm Wrench, 12 Points, 15 deg Offset, 279 mm OAL, Premium Alloy Steel, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
Drillco 28A050AB 2800 Straight Flute Tap, Right Hand Cutting, M5x0.8 Thread, D4 Thread Limit, Bottoming Chamfer, 4 Flutes, Uncoated, HSS
Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use in production tapping or hand operations in a wide range of application material groups.
