HCI PREFERRED SUPPLIER
CM-R-5-S 5/16" With Stud Right Hand Male Rod Ends
5/16" WITH STUD RIGHT HAND MALE ROD ENDS-QAPCMR5S >
CM-R-6 3/8" 2-piece Right Hand Male Rod Ends
3/8" 2-PIECE RIGHT HAND MALE ROD ENDS-QAPCMR6 >
CM-R-6-SZ 3/8" With Stud Right Hand Male Rod Ends
3/8" WITH STUD RIGHT HAND MALE ROD ENDS-QAPCMR6SZ >
CM-R-7 7/16" 2-piece Right Hand Male Rod Ends
7/16" 2-PIECE RIGHT HAND MALE ROD ENDS-QAPCMR7 >
CM-R-8 1/2" 2-piece Right Hand Male Rod Ends
1/2" 2-PIECE RIGHT HAND MALE ROD ENDS-QAPCMR8 >
COM-16 SEALMASTER 1"-ID SPHERICAL BUSHINGS/BEARINGS
1"-ID SPHERICAL BUSHINGS/BEARINGS-SEACOM16 >
COPY 8.5" X 11" 20# COPY PAPER--CS/5000
8.5" X 11" 20# COPY PAPER--CS/5000-WHYCOPY >
COROPLAST-4X8 4' X 8' X 4-mm Corrugated Polypropylene
4' X 8' X 4-MM CORRUGATED POLYPROPYLENE - CPICOROPLAST4X8 >
CP-0 ILSCO ELECTRICAL1/0-14 AWG X 5/16" BOLT CONNECTORS
Conductor Wire Range: Accepts copper wires ranging from 8 AWG up to 1/0 AWG. Stud/Bolt Size: Features a single mounting hole designed for a 5/16-inch bolt or stud .Material Compatibility: For copper conductors only (do not use with aluminum).Physical Dimensions: Measures 1-1/2 inches in length, 3/4 inch in width, and 5/8 inch in height .Installation Tool: Features a 1/4-inch hex slot screw for tightening the wire.
CP-250 ILSCO ELECTRICAL POST CONNECTORS
Conductor Range: 6 AWG to 250 kcmil (MCM) stranded copper wires. Stud/Bolt Size: 3/8-inch mounting hole. Drive Size: 1/4-inch internal hex main drive screw. Voltage & Temperature: Rated for up to 35 kV (with proper high-voltage insulation spacing techniques) and a maximum temperature of 90°C.Pre-Filled Compound: Contains DE-OX® oxide inhibitor to protect contact surfaces from corrosion. Certifications: UL 467 Listed (Grounding and Bonding), UL 486A/B Listed, and CS
CP-4 #4-#14-awg X 1/4" Bolt Post Connect
High Conductivity Copper Alloy Material; 1-3/32 Inch Overall Length; 14 AWG min. Conductor Size; 4 AWG Max. Conductor Size; Copper Conductor Material; UL 486A/B, CSA Approval; 1 Conductor(S); 1/4 Inch Stud Size; 17/32 Inch W Pad Size; 1 Pad Hole(S)
CP-8 ILSCO POST CONNECTORS
Conductor Range: Accommodates wire sizes from 14 AWG to 8 AWG (Solid or Stranded).Material: Manufactured from high-conductivity copper alloy for long-lasting electrical contact. Mounting: Features a 1-hole straight pad designed for a #10 bolt/stud size. Voltage & Temp Rating: Rated for up to 35,000 Volts (35 kV) with an operating limit of 90°C.Screw Type: Equipped with a standard slot screw mechanical mechanism. Certifications: UL 486A/B Listed, UL 467 Listed, and CSA certified. Wire and Metal Restrictions Copper Conductors Only: This connector is specifically designed for copper-to-copper connections. Do not use it with aluminum wiring. Purchase Options & Availability You can find individual lugs or multi-packs depending on your project scale: Individual Lug (CP-8): Available online at retailers like Mars Electric for $4.55 and Gordon Electric Supply for $5.59.Bag of 2 (CP-8-B2): Perfect for smaller, specific residential electrical or grounding tasks. Pack of 100 (CP-8 Standard Box): Ideal for commercial inventory or large contractors seeking a bulk discount. Are you looking to use this connector for a specific grounding project, or do you need help finding alternative lugs for different wire size ranges?13 sitesCP-8The Copper Post Connector (CP-8) is a mechanical connection with the following specifications: * **Voltage rating** 35 kV * **Test...Ilsco Specs - IlscoCP-8. SKU: 0783669029956. UPC: Features & Benefits: Copper Post Connector, Conductor Range 8-14, #10 Bolt. Description: Size, UL, ...Ilsco ILSCO CP-8 Copper Post Connector, Conductor Range 8-14 ...Wire Management, Grounding & Termination. Wire Termination. Mechanical Connectors. ILSCO CP-8 Copper Post Connector, Conductor Ran...Mars Electric
CP-9985 35-1/2"l X 24"w X 4"h 2-channel Cable Protector
35-1/2"L X 24"W X 4"H 2-CHANNEL CABLE PROTECTOR - VESCP9985>
CPH-2000 2" Trailer Ball Pintle Hook Combos
2" TRAILER BALL PINTLE HOOK COMBOS-REDCPH2000>
CR-1-1/2 1-1/2" X 48" Cold Rolled Shafting
1-1/2" X 48" COLD ROLLED SHAFTING - JMSCR11/2 >
CR-1-1/4 1-1/4" X 48" Cold Rolled Shafting
1-1/4" X 48" COLD ROLLED SHAFTING - JMSCR11/4 >
CR-1-1/4-XB 1-1/4" Sealed HEX Cam Followers
1-1/4" SEALED HEX CAM FOLLOWERS-SMICR114XB >
CR-1-1/8 1-1/8" X 36" Cold Rolled Shafting
1-1/8" X 36" COLD ROLLED SHAFTING - JMSCR11/8 >
Recently Viewed
RIDGID® 31020 Heavy Duty Straight Pipe Wrench, 2 in Pipe, 14 in OAL, Floating Forged Hook Jaw, Ductile Iron Handle, Knurled Nut Adjustment, Red
Meet your go-to wrench for life. Built with a sturdy I-beam 14-inch handle for a tight grip and no slip, the Model 14 Heavy-Duty Straight Pipe Wrench offers features you’ll count on day-in and out: like a full-floating forged hook jaw for fast ratcheting action, and a knurled adjustment nut for one-handed operation. Easy on the knuckles; strong on performance. Find out why, for more than 80 years, professionals have trusted RIDGID wrenches to get the job done.
Browning® 767624 VPLS 200 Normal Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-23/32 to 4-17/32 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767385 VPE 200 Normal Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-7/8 in Base to Bore Centerline, 6-3/4 in OAL x 3-11/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767580 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-11/16 to 4-9/16 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767357 VPLE 200 Normal Duty Pillow Block Ball Bearing, 5/8 in Dia Bore, 3-1/8 to 4-1/8 in L Bolt Center-to-Center, 1-1/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-3/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767861 VPE 100 Intermediate Duty Pillow Block Ball Bearing, 1-11/16 in Dia Bore, 5-1/4 to 6-1/16 in L Bolt Center-to-Center, 2-1/8 in Base to Bore Centerline, 7-3/8 in OAL x 4-1/4 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
