HCI PREFERRED SUPPLIER
1-1/8"-ID JAW COUPLING HALFS/HUBS IDC L-100 X 102-K
1-1/8" -ID JAW COUPLING HALVES
1-1/8X4 1-1/8" X 48" Aisi-1018" Keyed Shaft
1-1/8" X 48" AISI-1018" KEYED SHAFT-FLS11/8X4 >
1-11/16" EXTERNAL RETAINING RINGS ANR 1400-168
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS
1-13/16" EXTERNAL RETAINING RINGS ANR 1400-181
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME CONSUMING METHODS
1-13/16" INTERNAL RETAINING RINGS ANR 1300-181
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS
1-15/16" HEAVY DUTY RETAINING RING ANR 1460-193
HOUSING RINGS, SOMETIMES CALLED HO RINGS, INSTALL INTO AN ASSEMBLY WITH THE HELP OF NEEDLE-NOSE PLIERS OR SPECIALIZED RETAINING RING PLIERS
1-15/16"-ID CONVEYOR PULLEY BUSHINGS IDC XTB-25-1-15/16
1-15/16"-ID CONVEYOR PULLEY BUSHING
1-2-C SEALMASTER 2"-ID SPH/OD INSERT BEARINGS
2"-ID SPHERICAL/OD INSERT BEARINGS-SEA12C >
1-232-MV CRESCENT LIGHTING 48" T-8 2-BULB FIXTURE W/REFLECTOR
COMMENTS
STRIP LIGHT WITH REFLECTOR
USES TWO T-8 48" BULBS (NOT INCLUDED)
USES ONE 2-BULB MULTIVOLT BALLAST (INCLUDED)
BALLAST: "UNV" REL-2-P-32-SC (REL2P32SC)
1-3/16" E-CLIP RETAINING RINGS ANR 1500-118
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDELY
-ANR1500118 >
1-3/16" EXTERNAL RETAINING RINGS ANR 1400-118
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS
1-3/4" EXTERNAL RETAINING RINGS ANR 1400-175
RETAINING RINGS ARE PRECISION-ENGINEERED COMPONENTS, WHICH WHEN APPLIED IN BORES PROVIDES A SHOULDER THAT ACCURATELY POSITIONS, LOCATES OR RETAINS OTHER PARTS OF AN ASSEMBLY. THEY CAN BE USED TO REPLACE PINS AND WASHERS, THREADED SECTIONS, COLLARS, MACHINE SHOULDERS, AND OTHER COSTLY OR TIME-CONSUMING METHODS
Recently Viewed
1" X 5/8" CYLINDRICAL MOUNTED ROTARY FILE WITH ROUNDED END WITH 1/4" SHANK. CARDED MAXRPG: 2.500. SHANK MOUNTED ROTARY FILES ARE ROUGH, RUGGED TOOLS MADE FROM SPECIAL TEMPERED STEEL-FOR60070 >
Klein Tools has designed a set of Impact Power Bits for the professional electrician. All the bits are made of high-impact rated S2 steel and color coded for easy identification. The 1-1/4-Inch (6.4 mm) long driver bits are easier to grip than a standard 1-Inch (25.4 mm) bit. The bit holder and nut drivers have strong magnets, and are also designed longer so they reach easily into junction boxes. Minimal chamfering on the nut drivers’ hex pockets increases surface contact between the nut and driver for better performance. All 26 pieces fit snugly in a durable, impact-resistant case featuring steel hinges, a stay-shut latch, and a hidden compartment for loose bits.
Angle Meter provides large readable scale for accurate readings from 0 Deg to 90 Deg in any quadrant. Integral magnetic base frees hands when used on ferrous surfaces. Meter measures any angle for pitch or slope and provides handy rise, run, angle and pitch information on back of the tool.
_100x100.jpg)
PVC ELECTRICAL SWITCH COVERS-JWH510995>
3-AMP 600-VOLT AC TIME DELAY FUSE - BUSFRSR3>
75148 Pressure Washer Accessories, Spray Nozzle Assortment, 4.0mm, 5
PRESSURE WASHER ACCESSORIES, SPRAY NOZZLE ASSORTMENT, 4.0MM, 5 PIECE-FOR75148 >
