HCI PREFERRED SUPPLIER

Bore Diameter (ID): 30 mm Outside Diameter (OD): 62 mm Overall Width (W): 16 mm Internal Clearance: C3 (greater than normal fit to allow for thermal expansion) Precision Rating: ABEC 3Limiting Speed: 15,000 RPM Static Radial Load Capacity: 11.2 kN (2,518 lb.)Dynamic Radial Load Capacity: 4,564 lb.

DOUBLE SHIELDED BALL BEARINGS

DOUBLE OPEN FACE BALL BEARING-GUL6206 >

DOUBLE SEALED BALL BEARING-GUL62062RS >

Bore Diameter (ID): 30 mm Outside Diameter (OD): 62 mm Overall Width (W): 16 mm Dynamic Load Capacity: 20,300 N (4,564 lb.)Static Load Capacity: 11,200 N (2,518 lb.)Limiting Speed: 7,500 RPM Precision Rating: ABEC 3

DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62062RSNR >

DOUBLE SHIELDED BALL BEARING-GUL62062Z >

Bore Diameter (Inner): 30 mm Outside Diameter: 62 mm Width: 16 mm Closure Type: Double shielded (metal shields on both sides, designated by "-2Z" or "ZZ") Limiting Speed: 12,000 RPM

DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL62062ZNR >

Bore Diameter (Inner ID): 30 mm Outside Diameter (OD): 62 mm Overall Width (W): 16 mm Dynamic Radial Load Capacity: 4,564 lb. (20.3 kN)Static Radial Load Capacity: 2,518 lb. (11.2 kN)Limiting Speed: 15,000 RPM

DOUBLE SEALED BALL BEARINGS WSR-SNA6206NREE>

Inner Diameter (Bore): 1.1811 in / 30 mm Outer Diameter: 2.4409 in / 62 mm Width: 0.6299 in / 16 mm Body Material: Deep drawn sheet steel Shielding: Single metal shield on one side

DOUBLE SHIELDED BALL BEARINGS

DOUBLE SEALED BALL BEARING-GUL62072RS >

DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62072RSNR >

DOUBLE SHIELDED BALL BEARING-GUL62072Z >

DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL62072ZNR >

TAPER DOUBLE SEALED BALL BEARING-GUL6207K2RS >

DOUBLE SHIELDED BALL BEARINGS-SNR6207ZZ>

DOUBLE SEALED BALL BEARING-GUL62082RS >

DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62082RSNR >

DOUBLE SHIELDED BALL BEARING-GUL62082Z >

DOUBLE SEALED BALL BEARINGS WSR-SNR6208NREE>

SPHERICAL OD BALL BEARINGS