HCI PREFERRED SUPPLIER

2" RAWHIDE HAMMER FACE SIZE #4-GAR21004>

3/32" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21004 >

2-3/4" #5 RAWHIDE FACES--PK/2-GAR21005>

1/8" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21006 >

5/32" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21007 >

3/16" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21008 >

2" X 120" 1-PLY TWISTED-EYE NYLON SLING - SWC21011 >

2" X 120" 1-PLY FLAT-EYE NYLON SLING - SWC21013 >

2" X 120" 2-PLY FLAT-EYE NYLON SLING - SWC21020 >

2" X 120" 2-PLY TWISTED-EYE NYLON SLING - SWC21021 >

OIL SEALS-2.000" X 2.630" X .512"-IMS21055>

OIL SEALS-2.125" X 2.750" X .500"-IMS21061>

OIL SEALS-2.125" X 2.763" X .250"-IMS21070>

DOUBLE OPEN FACE BALL BEARINGS

SEAL KITS-181729 HALF SEALS-IMS211>

Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings

Bore Diameter: 55 mm Outside Diameter: 100 mm Width: 21 mm Max RPM (Grease): 5200 rpm Max RPM (Oil): 6300 rpm Radial Dynamic Load: 48,400 N (10,900 lb.) Radial Static Load: 44,000 N (9890 lb.)

1-3/4" LARGE POSITIONING SAFETY BELTS-SAF2111L >

1-3/4" MEDIUM POSITIONING SAFETY BELTS-SAF2111M >

SAFETY BELTS-SAF2111XL>

OIL SEALS-2.125" X 2.891" X .250"-IMS21121>

2X-LARGE BLUE SMS COVERALL WITH ELASTIC AT WRIST & ANKLES-CHR211202XL >

XXX-LARGE BLUE ECONOMY SMS COVERALL WITH ELASTIC WRISTS & ANKLE-CHR211203XL>

LARGE BLUE SMS COVERALL WITH ELASTIC AT WRIST & ANKLES-CHR21120L >