HCI PREFERRED SUPPLIER

2" X 96" 1-PLY FLAT-EYE NYLON SLING - SWC20813 >

2" X 27-1/2" FLAT-EYE NYLON SLING - SWC20819 >

2" X 96" 2-PLY TWISTED-EYE NYLON SLING - SWC20821 >

he MRC 209MF is a single-row deep groove radial ball bearing with filling slots (a "max type" bearing). It features a 45 mm inner diameter, 85 mm outer diameter, and 19 mm width, and includes a single shield. It accommodates higher radial loads than standard bearings but cannot handle significant thrust loads.

Bore Diameter (ID): 45 mm Outside Diameter (OD): 85 mm Overall Width: 19 mm Closure Type: Double Shielded (Metal shields on both sides Internal Clearance: C3 (greater than normal radial internal clearance) Max Speed: Up to 9,000 RPM Material: High-quality bearing steel

• Shaft Diameter (Inside Diameter): 40.00 mm (1.575 inches)
• Housing Bore (Outside Diameter): 80.00 mm (3.150 inches)
• Seal Width (Thickness): 12.00 mm (0.472 inches)

2" X 9'4" 2-PLY FLAT-EYE NYLON SLING - SWC209421 >

OIL SEALS-2.094" X 3.149" X .550"-IMS20965>

20" X 45" X 5/16" BLACK SPONGE ANTI-FATIGUE MAT - TEN20X45X5/16BLK>

20" X 90" WHITE OPAQUE 7MIL SHRINK FILM-ARP20X90WHITEFILM >

HAIR PIN COTTER-MED2101 >

10 INCH SURFORM ROUND FILES-STA21297 >

GREASE CAP 1.986 O.D-RED21411 >

2-1/2" X 1/2" X 2-1/2" BLACK TEE-JPW21/2X1/2X21/2BT >

1/16" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21002 >

1-3/4" #3 RAWHIDE FACES

2" RAWHIDE HAMMER FACE SIZE #4-GAR21004>

3/32" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21004 >

1/8" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21006 >

5/32" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21007 >

3/16" 7X7 GALVANIZED AIRCRAFT CABLE (FT)-TCI21008 >

2" X 120" 1-PLY TWISTED-EYE NYLON SLING - SWC21011 >

2" X 120" 1-PLY FLAT-EYE NYLON SLING - SWC21013 >

2" X 120" 2-PLY FLAT-EYE NYLON SLING - SWC21020 >