HCI PREFERRED SUPPLIER
1/2-XH-B-T 1/2" -female Pipe Thread Schedule 80 Black Tee
1/2" -FEMALE PIPE THREAD SCHEDULE 80 BLACK TEE-FIT1/2XHBT >
1/2-XH-B-U 1/2" -female Pipe Thread Schedule 80 Black Unions
1/2" -FEMALE PIPE THREAD SCHEDULE 80 BLACK UNIONS-FIT1/2XHBU >
1/2-XH-BE 1/2"-fpt Schedule-80 90-degree Black Elbow
1/2"-FPT SCHEDULE-80 90-DEGREE BLACK ELBOW - JPW1/2XHBE >
1/2-XH-BW-F-THR 1/2" Schedule 80 Threaded Flanges
1/2" SCHEDULE 80 THREADED FLANGES-FIT1/2XHBWFTHR >
1/2-XH-SW-B-45 1/2" Socket Weld Black 45-d Elbow
1/2" SOCKET WELD BLACK 45-D ELBOW-FIT1/2XHSWB45 >
1/2" E-CLIP RETAINING RINGS ANR 1500-50
THE BASIC E-CLIP PROVIDES RELATIVELY LARGE SHOULDER HEIGHT FOR A SMALL SHAFT DIAMETER. ONLY GROOVE SIZE IS CRITICAL WITH THIS TYPE OF CIRCLIP, THE SHAFT DIAMETER CAN BE VARIED WIDE
1/2" EXTERNAL RETAINING RINGS ANR 1400-50
CONSTRUCTED AS CURVED BEAMS OF UNIFORM STRENGTH, THE RADIAL WIDTH IS REDUCED TOWARDS THE FREE ENDS SO THAT A CONSTANTLY ROUND SHAP IS MAINTAINED THROUGHOUT CONTINUOUS USE. THIS FORM OF CIRCLIP OFTEN USED IN ASSEMBLIES SUBJECTED TO STRONG CENTRIFUGAL FORCES, IS ALSO SECURE AGAINST HIGH ROTATIONAL SPEEDS. LUGS WITH HOLES ARE PROVIDED FOR RAPID FITTING OR REMOVAL WITH CIRCLIP PLIERS.
1/2"-ID 1-PC CLAMP SHAFT COLLARS
1/2" 1-PIECE CLAMP SHAFT COLLAR
1/2"-ID S/STEEL 1-PC SHAFT COLLARS
1/2" STAINLESS STEEL 1-PIECE CLAMP SHAFT COLLAR
1/2"-ID W/KW JAW COUPLING HALF IDC L-075 X 008-K
1/2" -ID JAW COUPLING HALVES
1/2SQX16GAX24 1/2" X 16-ga Square Tubing
1/2" X 16-GA SQUARE TUBING-JMS1/2SQX16GAX24 >
1/2X020 1/2" X .020" Metal Strap--roll Of 100#
1/2" X .020" METAL STRAP--ROLL OF 100#-DUB1/2X020 >
1/2X023 1/2" X .023" Metal Strap--roll Of 100#
1/2" X .023" METAL STRAP--ROLL OF 100#-DUB1/2X023>
Recently Viewed
MARXMANâ„¢ 85047 330QI General Purpose Jobber Length Drill Bit, T Drill - Letter, 0.358 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. SET of 8: 565A/B/C/D/E/F/G/H in Protective Vinyl Case.
MORSE® 11671 1332B General Purpose Jobber Length Drill Bit, S Drill - Letter, 0.348 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 51113 5374 Standard Length Jobber Length Drill Bit, N Drill - Letter, 0.302 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
Amboreâ„¢ 12090 1384 Heavy Duty Jobber Length Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
MARXMANâ„¢ 85051 330QI General Purpose Jobber Length Drill Bit, X Drill - Letter, 0.397 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
