HCI PREFERRED SUPPLIER
F-96-T-8TL835HO 96" T-8 High Output Fluorescent Bulb
bulbs f96t8tl835hoThe Philips F96T8/TL835/HO/PLUS ALTO is an 8-foot, high-output linear fluorescent tube light bulb primarily designed for commercial, industrial, and garage lighting.
F-96-T12-CWHOEW 8' Alto Fluorescent Bulbs--green
8' ALTO FLUORESCENT BULBS--GREEN TIPPED-BULF96T12CWHOEW >
F-96-T12-CWHOSS Shatter Shield Bulb
The F96T12/CW/HO/SS is an 8-foot (96-inch), 95-Watt High Output (HO) "Super Saver" linear fluorescent tube light bulb featuring a Recessed Double Contact (R17d) base. This bulb emits a neutral, bright 4100K–4200K Cool White light and generates approximately 8,050 lumens, making it a common fixture in warehouses, commercial spaces, and large garages.
F-96-T8-SP-41HO 96 High Output Fluorescent Bulb
Dimensions: 96 inches long (8 feet) with a 1-inch (T8) tube diameter. Electrical: Consumes 86 Watts of power and requires a compatible High-Output electronic ballast to operate. Base Type: R17d (Recessed Double Contact), which is standard for HO fluorescent systems. Color Temperature: 4100K (Cool White), providing a clean, bright, and crisp neutral-to-cool visual environment. Brightness & Efficiency: Delivers an initial output of 8,200 lumens with a high Color Rendering Index (CRI) of up to 85 for accurate color representation. Lifespan: Rated for 18,000 hours of operational life.
F-96-T8-SP-50HO 96 High Output Fluorescent Bulb
96 HIGH OUTPUT FLUORESCENT BULBS-BULF96T8SP50HO >
F-96T12CWHOALTO 8' Alto Ho Outside Fluorescent Bulb
8' ALTO HO OUTSIDE FLUORESCENT BULBS-BULF96T12CWHOALTO >
F-9X32-1-R 9" X 32" Singleax LE Fenders
9" X 32" SINGLEAX LE FENDERS-REDF9X321R >
F-HB-C-6-32-MV CRESCENT LIGHTING 48" 6-BULB T-8 32-W LIGHT FIXTURES
COMMENTS
FULL BODY HIGH BAY CURVED FIXTURE WITH MIRRORED REFLECTOR
USES SIX T-8 48" BULBS (NOT INCLUDED)
USES ONE 4-BULB & ONE 2-BULB MULTI-VOLT BALLAST (INCLUDED)
F-HB-C-6-54-MV CRESCENT LIGHTING 48" 6-BULB T-5 54-W LIGHT FIXTURES
FULL BODY HIGH BAY CURVED FIXTURE WITH MIRRORED REFLECTOR
USES SIX T-5 48" BULBS (NOT INCLUDED)
USES ONE 4-BULB & ONE 2-BULB MULTI-VOLT BALLAST
F-R-6-2-RS Flanged Double Sealed Ball Bearing
FLANGED DOUBLE SEALED BALL BEARING-GULFR62RS >
F-R-6-2-Z Flanged Double Shield Ball Bearing
FLANGED DOUBLE SHIELD BALL BEARING-GULFR62Z >
F13DTT/835GX232 a 13-Watt plug-in compact fluorescent lamp (CFL) engineered with a Double Twin Tube (or Quad Tube) layout
FLUORESCENT BULBS-BULF13DTT/835GX232>
F15-T8-SP-35 15-watt Fluorescent Bulb
15-WATT FLUORESCENT BULBS-BULF152T8SP35>
F17-T8-735 24 T-8" 17 Watt 735 Fluorescent Bulb
17-Watt 2 ft. T8 Daylight Deluxe linear fluorescent light bulb is ideal for use in your kitchen, bath or any room in your home. It provides an energizing and bright natural daylight and is designed for general lighting needs.
F18DBX/SPX35/4P 18-watt Compact Fluorescent Bulb
18-WATT COMPACT FLUORESCENT BULBS
F28T8/841/XP/SS Shatter Shield Bulb
SHATTER SHIELD BULB-BULF28T8/841/XP/SS>
F28T8XLSPX41ECO 48ex Tra-life Fluorescent Bulbs
48EX TRA-LIFE FLUORESCENT BULBS-BULF28T8XLSPX41ECO >
F32T8/TL735ALTO 32-watt 48 T-8" Alto Fluorescent Bulb
32-WATT T-8 FLOURESCENT LIGHT BULBS
2 PINS ON EACH END OF BULB LENGTH: 48" DIAMETER: 1"
F32T8/TL841ALTO 32-watt 48" T-8 Fluorescent Bulb
48"-LONG 1"-DIAMETER 32-WATT
DOUBLE PIN ON EACH END FLORESCENT BULBS
F32T8ADV850EWAL 28-watt T-8" Fluorescent Bulbs
28-WATT T-8" FLUORESCENT BULBS #147355-BULF32T8ADV850EWAL >
F40T12CWEW-ALTO 48 Alto Fluorescent Bulbs
48 ALTO FLUORESCENT BULBS-BULF40T12CWEWALTO >
F54T5/850/SS-HO 54-watt T-5 H/o Shatter Shield Bulb
54-WATT T-5 H/O SHATTER SHIELD BULB
Recently Viewed
Koyo 21075 Caged Cylindrical Bearing Cone, 19.05 mm Dia Bore, 21.839 mm W Cone, 1.6 mm Max Shaft Fillet Radius, 52.6 kN Dynamic/41.2 kN Static Load, For Use With TS Type 1-Row Tapered Roller Bearing
Amboreâ„¢ 12068 1384 Heavy Duty Jobber Length Drill Bit, 5/32 in Drill - Fraction, 0.1562 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
3/4" BLACK PLUG CORED
Drawn Cup Needle Roller Bearings supports radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearing are easily installed with a press fit in the housing.
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
