HCI PREFERRED SUPPLIER
208-104 1/4"-20 USS Threaded Inserts--pk/12
1/4"-20 USS THREADED INSERTS--PK/12 TOOTHHR208104 >
208-102 12-24" X .324" Inserts--pk/12
12-24" X .324" INSERTS--PK/12 TOOTHHR208102 >
208-014 4-40" X .168" Inserts--pk/12
4-40" X .168" INSERTS--PK/12 TOOTHHR208014 >
20702 Oil Seals-2.063" X 3.189" X .375"
OIL SEALS-2.063" X 3.189" X .375"-IMS20702>
207 Double Open Max Load Ball Bearing
DOUBLE OPEN MAX LOAD BALL BEARINGS-SKF207>
20630 2" X 72" 3-ply Flat-eye Nylon Sling
2" X 72" 3-PLY FLAT-EYE NYLON SLING - SWC20630 >
20621 2" X 72" 2-ply Twisted-eye Nylon Sling
2" X 72" 2-PLY TWISTED-EYE NYLON SLING - SWC20621 >
20620 2" X 72" 2-ply Flat-eye Nylon Sling
2" X 72" 2-PLY FLAT-EYE NYLON SLING - SWC20620 >
20611 2" X 72" 1-ply Twisted-eye Nylon Sling
2" X 72" 1-PLY TWISTED-EYE NYLON SLING - SWC20611 >
20608 Oil Seals-2.063" X 3.000" X .313"
OIL SEALS-2.063" X 3.000" X .313"-IMS20608>
206-M-20-C-0300 20-mm X 2.50 0300 Threaded
20-MM X 2.50 0300 THREADED INSERTS-THR206M20C0300>
206-M-16-C-0240 16-mm X 2.00 X .240" Thread
16-MM X 2.00 X .240" THREAD INSERT-THR206M16C0240>
206-M-14-C-0280 14-mm X 28-mm Thread
14-MM X 28-MM THREAD INSERTS-THR206M14C0280>
206-M-12-C-0240 12-mm X 1.75 X 24-mm-long
12-MM X 1.75 X 24-MM-LONG INSERTS-THR206M12C0240>
206-M Double Open Faced Ball Bearing
Bore Diameter (ID): 30 mm (1.1811 inches) Outside Diameter (OD): 62 mm (2.4409 inches) Width: 16 mm (0.6299 inches) Bearing Type: Radial filling-notch max-capacity ball bearing Bore Type: Straight Application Warning: Due to the filling slot design, this bearing is highly optimized for predominant radial loads and should not be used in pure thrust (axial)
206-ALU 12" X 1000' Aluminum Foil(roll)
12" X 1000' ALUMINUM FOIL(ROLL)-WHY206ALU >
206-310 10-mm X 1.50 Threaded Inserts--pk/12
10-MM X 1.50 THREADED INSERTS--PK/12 TOOTHHR206310 >
206-308 8-mm X 1.25 Thread Insert--pk/12
8-MM X 1.25 THREAD INSERT--PK/12 TOOTHHR206308 >
206-306 6-mm X 1.00 Threaded Inserts--pk/12
6-MM X 1.00 THREADED INSERTS--PK/12 TOOTHHR206306 >
206-305 5-mm X 0.80 Threaded Inserts--pk/12
5-MM X 0.80 THREADED INSERTS--PK/12 TOOTHHR206305 >
