HCI PREFERRED SUPPLIER

AI Mode Conversation: MRC215szzxmrc 215szzxThe MRC 215SZZX is a heavy-duty, single-row radial deep groove ball bearing manufactured by MRC (a brand under SKF). It is specifically engineered with a tapered bore for mounting with adapter sleeves on heavy industrial machinery. Technical static Maximum Type: Tapered 1:12Bore Diameter (Inner): 75 mm Outside Diameter: 130 mm Width: 25 mm Closure Type: Double Sealed (Nitrile Rubber seals) Internal Clearance: C3 (greater than normal radial clearance) Load Capacity: 14,900 lbf dynamic / 11,000 lbf staticMaximum Speed: 5,600 RPM

Bore Diameter (Inner): 60 mm Outside Diameter (Outer): 110 mm Width: 22 mm Closure Type: Double sealed / dual shielded (SZZ)Bore Type: Straight / cylindrical Maximum Speed: 7,000 Primoradial Dynamic Load Capacity: 10,700 lb. Radial Static Load Capacity: 7,310 lbf

Bore Diameter (Inner ID): 60 mm (2.362 in) Outside Diameter (OD): 110 mm (4.331 in) Overall Width: 22 mm (0.866 in) Closure Type: Double Shielded (SFF indicates metal shields on both sides to resist contamination) Internal Clearance: C3 (greater than normal radial clearance for thermal expansion) Precision Rating: ABEC 1Interchange Equivalents: Industry-standard 6212-ZZ C3 or 6212-2Z

OIL SEALS-2.125" X 3.000" X .250"-IMS21159>

OIL SEALS-2.125" X 2.997" X .438"-IMS21136>

3/8" CHUCKS-SIO21133>

OIL SEALS-2.125" X 2.891" X .250"-IMS21121>

X -LARGE BLUE SMS COVERALL WITH ELASTIC AT WRIST & ANKLES-CHR21120XL >

LARGE BLUE SMS COVERALL WITH ELASTIC AT WRIST & ANKLES-CHR21120L >

XXX-LARGE BLUE ECONOMY SMS COVERALL WITH ELASTIC WRISTS & ANKLE-CHR211203XL>

2X-LARGE BLUE SMS COVERALL WITH ELASTIC AT WRIST & ANKLES-CHR211202XL >

OIL SEALS-2.125" X 2.891" X .250"-IMS21121>

SAFETY BELTS-SAF2111XL>

1-3/4" MEDIUM POSITIONING SAFETY BELTS-SAF2111M >

1-3/4" LARGE POSITIONING SAFETY BELTS-SAF2111L >

Bore Diameter: 55 mm Outside Diameter: 100 mm Width: 21 mm Max RPM (Grease): 5200 rpm Max RPM (Oil): 6300 rpm Radial Dynamic Load: 48,400 N (10,900 lb.) Radial Static Load: 44,000 N (9890 lb.)

Inner Diameter (ID): 60 mm (2.36 inches) Outer Diameter (OD): 110 mm (4.33 inches) Width: 22 mm (0.87 inches) Load Rating: Basic dynamic load rating of 56.1 kN and basic static load rating of 42.5 kN Limiting Speed: Up to 6000 rpm (oil) or 6700 rpm Design: Utilizes filling slots to accommodate higher radial loads than standard deep groove bearings

SEAL KITS-181729 HALF SEALS-IMS211>

DOUBLE OPEN FACE BALL BEARINGS

OIL SEALS-2.125" X 2.763" X .250"-IMS21070>

OIL SEALS-2.125" X 2.750" X .500"-IMS21061>

OIL SEALS-2.000" X 2.630" X .512"-IMS21055>

2" X 120" 2-PLY TWISTED-EYE NYLON SLING - SWC21021 >

2" X 120" 2-PLY FLAT-EYE NYLON SLING - SWC21020 >