HCI PREFERRED SUPPLIER
2304X2 1/8" -female Pipe Thread Needle Shutoff
1/8" -FEMALE PIPE THREAD NEEDLE SHUTOFF VALVE-FTG2304X2 >
23048-K Tpr-ID Spherical Roller
TPR-ID SPHERICAL ROLLER BEARING-GUL23048K >
23048 Straight-ID Spherical Roller
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL23048 >
23040-K Taper-ID Spherical Roller Bearing
TAPER-ID SPHERICAL ROLLER BEARING - GUL23040K>
23040 Straight-ID Spherical Roller Bearing
STRAIGHT-ID SPHERICAL ROLLER BEARING - GUL23040>
23040 Str-ID Spherical Roller
STR-ID SPHERICAL ROLLER BEARINGS-SNR23040>
23038 Straight-ID Spherical Roller Bearing
STRAIGHT-ID SPHERICAL ROLLER BEARING - GUL23038>
23036-K Tpr-ID Spherical Roller
TPR-ID SPHERICAL ROLLER BEARING-GUL23036K >
23034-K Tpr-ID Spherical Roller
TPR-ID SPHERICAL ROLLER BEARING-GUL23034K >
23034 Straight-ID Spherical Roller
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL23034 >
230300 Str-ID Spherical Roller
STR-ID SPHERICAL ROLLER BEARINGS-SNR23030>
23030-K Tpr-ID Spherical Roller Bearing
Inner Diameter (Bore): 150 mm Outer Diameter: 225 mm Width: 56 mm Bore Type: Tapered (K = taper 1:12) Design Features: Self-aligning, accommodates heavy radial and axial loads in both directions, typically includes an annular lubrication groove with three holes in the outer ring (W33 variant).
23030-K Tpr-ID Spherical Roller
TPR-ID SPHERICAL ROLLER BEARINGS-SNR23030K>
23030 Str-ID Spherical Roller Bearing
Radial shaft seal with metal case and SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
For oil or grease
With garter spring
WAVE lip creates higher pumping rate
WAVE lip has less friction between shaft and lip
WAVE lip has a lower temperature at the contact point
23030 Oil Seals-2.313" X 2.997" X .375"
OIL SEALS-2.313" X 2.997" X .375"-IMS23030>
23028-K Tpr-ID Spherical Roller
TPR-ID SPHERICAL ROLLER BEARINGS-SNR23028K>
23028 Straight-ID Spherical Roller
STRAIGHT-ID SPHERICAL ROLLER BEARING-GUL23028 >
23026 Str-ID Spherical Roller
STR-ID SPHERICAL ROLLER BEARINGS-SNR23026>
23024 Str-ID Spherical Roller
STR-ID SPHERICAL ROLLER BEARINGS-SNR23024>
23021 2" X 360" 2-ply Twisted-eye Nylon Sling
2" X 360" 2-PLY TWISTED-EYE NYLON SLING - SWC23021 >
2301 RUSTOLEUM PAINT PRODUCTS
CLEAR UPSIDE DOWN MARKING SPRAY PAINT-RUS2301 >
