HCI PREFERRED SUPPLIER
LEXAN 48x120" X 3/16" Clear Lexan/polycarbonate
48X120" X 3/16" CLEAR LEXAN/POLYCARBONATE SHEET-CPI4X10X3/16LEXAN/POLYCARBONATE >
LER38 21/2" Spherical Bearing Sealing
21/2" SPHERICAL BEARING SEALING RINGS-GULLER38 >
LER-29 2-3/16" Bearing Sealing Rings
2-3/16" BEARING SEALING RINGS-SNRLER29 >
LER-140 Spherical Bearing
SPHERICAL BEARING SEAL RINGS-GULLER140 >
LEMON-PINESOL 144-oz Lemon Pinesol
144-OZ LEMON PINESOL CLEANER-WHYLEMONPINESOL >
LED9BR30/DIM827 9-Watt, dimmable BR30 LED floodlight bulb with a 2700K warm white color temperature
9-Watt, dimmable BR30 LED floodlight bulb with a 2700K warm white color temperature. It is primarily manufactured by Sylvania / LEDVANCE (often under ordering codes like 73954, 78691, or 40460), though other brands like Keystone and Bulb rite use the identical naming convention.
LED18WT8F48/840 48" 18-watt Led T-8 Bulb
48" 18-WATT LED T-8 BULBS-BULLED18WT8F48/840>
LED12DP382W/827 12-watt Par-38 Led Light Bulb
12-WATT PAR-38 LED LIGHT BULBS-BULLED12DP382W/827>
LED-WEL TCP LIGHTING 2-HEAD LED EMERGENCY LIGHTS
Low Profile Emergency Light White – 14″
LED-8.5-BR-30 8.5 Watt Br-30 Led Reflector Bulbs
8.5 WATT BR-30 LED REFLECTOR BULBS-BULLED8.5BR30>
LED-8.5-A-19 8.5-w a-19 50-K Led Bulbs
most commonly manufactured under the Sylvania / LEDVANCE Contractor Series. It serves as a direct, energy-saving replacement for standard 60-Watt incandescent light bulbs, providing the same level of brightness while consuming roughly 86% less electricity
LED-5-BR-20 5-watt R-20 Led Reflector Bulb
5-WATT R-20 LED REFLECTOR BULBS
LED-26-DP38S830 26-watt Par-38 Led Light Bulbs
LED 2700K Soft White Spot 8deg Dimmable Bulb - 100W Equiv.
LED-17-P-38-DIM 17-watt Par38 Led Flood Bulb
17-WATT PAR38 LED FLOOD BULBS
LED-13-PAR-30-FL 13-watt Par-30 Led Flood Bulbs
13-WATT PAR-30 LONG NECK FL-40 LED FLOOD BULB NON-DIMMABLE
LED-11-A-19 11-watt A-19 27-k Bulb
11-WATT A-19 27-K LED BULBS-BULLED11A19>
LED-10.5-A-19 10.5-w A19 27-k (60w) Led Bulbs-bulled10.
10.5W / 10.5A19: Refers to a 10.5-Watt energy draw. In LED terms, this typically delivers 1100 lumens of brightness, making it a 75-Watt incandescent equivalent. A19: Refers to the physical shape and size. The letter "A" designates the standard pear-shaped household bulb, while "19" indicates the diameter at its widest point (19/8ths of an inch).27K: Refers to 2700 Kelvin, which is the Soft White color temperature. This provides a warm, cozy light similar to classic incandescent bulbs, making it ideal for bedrooms and living rooms.
Recently Viewed
Milwaukee® 49-57-0251 Tang Drive Annular Cutter, 1/2 in Dia Cutter, 1 in D Cutting, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1/2 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
FOR CAULKING SOIL PIPE JOINT. THIS LEAD SUBSTITUTE IS ALSO REFERRED TO AS PLASTIC LEAD SEAL AND SOIL PIPE CEMENT. GRAY IN COLOR, WHICH REPLACES RED LEAD. WILL ALSO REPAIR CHINA, CAST IRON, ENAMEL WARE AND CLAY SOIL CEMENT. SOLD IN 1 PINT CAN.-JWH414126 >
A-323-3/8 CROSBY 3/8" FORGED EYE GRAB HOOKS
The Crosby A-323 3/8" is a heavy-duty, forged alloy steel Eye Grab Hook primarily designed for chain shortening, load securement, and tie-down applications. Manufactured by Kito Crosby, this hook has a Working Load Limit (WLL) of 7,100 lbs (3.55 tons) and features a standard 4:1 safety design factor.
A-330-1/4 CROSBY MATERIAL HANDLING GROUP 1/4" GR-80 CLEVIS GRAB HOOK
Forged steel, Quenched and Tempered
Features quick and easy assembly
Designed for use with Grade 70 chain
Not intended for overhead lifting
Must be proof-tested prior to use with a Grade 80 chain sling, in accordance with ASME B30.9
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
