HCI PREFERRED SUPPLIER
1/8" X 4" BLACK NIPPLE
1/8" -MALE PIPE THREADX4" BLACK NIPPLE-FIT1/8X4BN >
1/8X4-1/2-SSN 1/8" -male Pipe Threadx4-1/2" Stainless Steel Nipples
1/8" -MALE PIPE THREADX4-1/2" STAINLESS STEEL NIPPLE-FIT1/8X41/2SSN >
1/8" -MALE PIPE THREADX4-1/2" GALVANIZED NIPPLE-FIT1/8X41/2GN >
1/8" -MALE PIPE THREADX4-1/2" BLACK NIPPLE-FIT1/8X41/2BN >
1/8" X 3/4" X 12'ALUMINUM FLAT STOCK-JMS1/8X3/4X12ALUM >
1/8X3-XH-SSN 1/8" -male Pipe Threadx3" Schedule 80 Stainless Steel Nipple
1/8" -MALE PIPE THREADX3" SCHEDULE 80 STAINLESS STEEL NIPPLE-FIT1/8X3XHSSN >
1/8" -MALE PIPE THREADX3" SCHEDULE 80 BLACK NIPPLE-FIT1/8X3XHBN >
1/8" -MALE PIPE THREADX3" STAINLESS STEEL NIPPLE-FIT1/8X3SSN >
1/8" -MALE PIPE THREADX3" GALVANIZED NIPPLE-FIT1/8X3GN >
1/8" -MALE PIPE THREADX3" BLACK NIPPLE-FIT1/8X3BN >
1/8" -MALE PIPE THREADX3-1/2" GALVANIZED NIPPLE-FIT1/8X31/2GN >
1/8" -MALE PIPE THREADX3-1/2" BLACK NIPPLE-FIT1/8X31/2BN >
1/8X3-1/2-BN 1/8" -male Pipe Thread x 3-1/2" Black Nipple
1/8" -MALE PIPE THREADX3-1/2" BLACK NIPPLE
-FIT1/8X21/2BN >
1/8" X 2-1/2" X 24" DELRIN STRIPS-CPI1/8X2.5X4DELRIN>
1/8X2-XH-SSN 1/8" -male Pipe Threadx2" Schedule 80 Stainless Steel Nipple
1/8" -MALE PIPE THREADX2" SCHEDULE 80 STAINLESS STEEL NIPPLE-FIT1/8X2XHSSN >
1/8" -MALE PIPE THREADX2" SCHEDULE 80 BLACK NIPPLE-FIT1/8X2XHBN >
1/8" -MALE PIPE THREADX2" STAINLESS STEEL NIPPLE-FIT1/8X2SSN >
1/8" -MALE PIPE THREADX2" GALVANIZED NIPPLE-FIT1/8X2GN >
1/8X2-BN 1/8" -male Pipe Thread x 2" Black Nipple
1/8" -MALE PIPE THREADX2" BLACK NIPPLE
1/8" X 2-1/2" SCHEDULE 80 BLACK NIPPLE-FIT1/8X21/2XHBN >
1/8X2-1/2-SSN 1/8" -male Pipe Threadx2-1/2" Stainless Steel Nipple
1/8" -MALE PIPE THREADX2-1/2" STAINLESS STEEL NIPPLE-FIT1/8X21/2SSN >
1/8" -MALE PIPE THREADX2-1/2" GALVANIZED NIPPLE-FIT1/8X21/2GN >
Recently Viewed
Dichtomatik 75125853 O-Ring, 30 mm ID x 36 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Browning® Classical Gripbelt® 1026020 AK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 2-1/2 in OD, 2-1/2 in (A)/1.96 in (3L) Dia Pitch, 21/32 in W Face
Browning® Classical Gripbelt® 1026020 AK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 2-1/2 in OD, 2-1/2 in (A)/1.96 in (3L) Dia Pitch, 21/32 in W Face
APA® AllGard Protective Apparel C181204XL C18120 Coverall with Open Wrist and Ankle, 4XL, White, Micro-Porous Film Over Spunbonded Polypropylene
APA® AllGard Protective Apparel C181204XL C18120 Coverall with Open Wrist and Ankle, 4XL, White, Micro-Porous Film Over Spunbonded Polypropylene
Browning® Classical Gripbelt® 1002443 TB Series Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 8.95 in OD, 8.4 in (A)/8.9 in (B) Dia Pitch, 1 in W Face
Browning® Gearbelt® 1056852 Type 6 Synchronous Timing Pulley With Flange, 1/2 to 1-3/4 in Split Taper Bore, 3.447 in OD, 22 Grooves, 3.501 in Dia Pitch, 1-1/4 in W Face
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
3/4" VINYL COATED BODY CLAMPS-GVIRBC3/4X1/4 >
