HCI PREFERRED SUPPLIER
RB-12-UP 12" Unpainted Receiver Tubes
12" UNPAINTED RECEIVER TUBES-REDRB12UP >
RB-112-D 3/4" X 112" Pallet Red Rubber Bands
3/4" X 112" PALLET RED RUBBER BAND-GRERB112D >
RAO-2-7/16 2-7/16" -ID Pillow Block
2-7/16" -ID PILLOW BLOCK UNIT-MBURAO27/16 >
RAO-2-3/16 2-3/16" -ID Pillow Block
2-3/16" -ID PILLOW BLOCK UNIT-MBURAO23/16 >
RAO-2-15/16 2-15/16"-ID 300 Pillow Block
2-15/16"-ID 300 PILLOW BLOCK UNITS-MBURAO215/16>
RAO-1-7/16 1-7/16" -ID Pillow Block
1-7/16" -ID PILLOW BLOCK UNIT-MBURAO17/16 >
RAO-1-15/16 1-15/16" -ID Pillow Block
1-15/16" -ID PILLOW BLOCK UNIT-MBURAO115/16 >
RAO--2-11/16 2-11/16"-ID 300 Pillow Block
2-11/16"-ID 300 PILLOW BLOCK UNIT-MBURAO211/16>
R14-FF Double Shielded Deep Groove Ball Bearing
Cylindrical Bore Deep Groove Ball Bearing
Item #100755640
Deep Groove Bearing
0.88 in Inner Diameter
1.88 in Outer Diameter
0.5 in Width
Bearing Steel Material
R-8-ZZ Double Shielded Ball Bearing • Bore Diameter (Inner): 7/16 in (11.112 mm) • Outside Diameter: 7/8 in (22.225 mm) • Width: 9/32 in (7.142 mm) • Closure Type: Double Metal Shields (ZZ / FF) • Lubrication: Pre-filled with high-speed refinery grease
The MRC SR8-ZZ (or R8-ZZ) is an extra-small, inch-series deep groove ball bearing. Featuring double metal shielding to keep dust out and retain grease, this stainless-steel bearing is typically used in miniature applications, medical instruments, and light industrial equipment. Dimensional Specifications Inner Diameter (ID): 0.5000 in (1/2") Outer Diameter (OD): 1.1250 in (1-1/8") Width: 0.3125 in (5/16")
R-8-2-RS 1/2"-ID DOUBLE-SEALED BALL BEARING
DOUBLE SEALED BALL BEARING-GULR82RS >
R-75-08X36 TEADIT 1/4" X 36" RED RUBBER GASKET
1/4" RED RUBBER GASKET (FT)-TEAR7508X36 >
R-75-04X48 TEADIT 1/8" X 48" RED RUBBER GASKET (FT)
1/8" X 48" RED RUBBER GASKET (FT)-TEAR7504X48 >
R-75-04X36 TEADIT 1/8" X 36" RED RUBBER GASKET (FT)
1/8" X 36" RED RUBBER (FT)-TEAR7504X36 >
R-75-02X36 TEADIT 1/16" X 36" RED RUBBER (FT)
1/16" X 36" RED RUBBER (FT)-TEAR7502X36 >
R-6-48 R-6 Rivet Hinged Fastener
R-6 RIVET HINGED FASTENER - COVR648 >
R-6-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING-GULR62RSNR >
Recently Viewed
Square Dâ„¢ D221N E3 Series Fusible General Duty Safety Switch, 240 V AC, 30 A, 3 hp, 3PST Contact, 2 Poles
Schneider Electric's Square D general duty safety switches are designed for residential and light commercial applications where durability and economy are prime considerations. Typical loads include lighting, air conditioning, and appliances. General duty safety switches feature a quick make, quick break operating mechanism. This single throw safety switch is a fusible disconnect and has a rated current of 30A for 240VAC. This general duty switch has a 3 wire configuration with 2 poles and a factory installed neutral. The device accepts H, K or R fuse types. The enclosure is surface mounted and is a Type 1. General duty safety switches are UL Listed, and meet or exceed the NEMA Standard KS1.
14 TOOTH SPROCKETS FOR #50 CHAIN-BRWH5014X11/8 >
7/8" X 3/4" X 7-1/2" COLD CHISEL - ARS70315 >
GP® 2118D Deep Length Socket, 1/2 in, 9/16 in, 12 Points
The DCD950KX 1/2 in 18 V cordless XRPâ„¢ hammerdrill/drill/driver kit delivers 3-speed variations allowing users to choose the level of performance needed for various applications. Powered by a high-performance motor and bits are secured by heavy duty 1/2 in ratcheting chuck.
1" HOSEX16-FEMALE JIC 90 DEGREE LONG DROP-MHDE1616FJ90L >
