Fenner Drives
Fenner Drives® Eagle® 1032008 Non-Reinforced Solid Core Round Belt, 1/4 in Dia, Polyurethane, Orange
Eagle® orange 85 non-reinforced round belting is constructed of solid polyurethane with an 85 shore A durometer that provides excellent abrasion resistance, high elasticity and is also self-tensioning. Packaged in 100 ft/30.5 m L.
Fenner Drives® Eagle® 5700200 Butt Welding Kit
Fenner Drives® Eagle® 5700200 Butt Welding Kit
Fenner Drives® Eagle® 5700228 Hot Knife
Fenner Drives® Eagle® 5700228 Hot Knife
Fenner Drives® PowerTwist Drive® 0405030 Ribbed Link Belt, A/13/4L Section, 1/2 in W Top, 25 ft L Outside, 1/2 in THK, Polyester/Polyurethane
Fenner Drives® PowerTwist Drive® 0405030 Ribbed Link Belt, A/13/4L Section, 1/2 in W Top, 25 ft L Outside, 1/2 in THK, Polyester/Polyurethane
Fenner Drives® PowerTwist Drive® 0405050 Ribbed Link Belt, B/17/5L Section, 5/8 in W Top, 25 ft L Outside, 5/8 in THK, Polyester/Polyurethane
Fenner Drives® PowerTwist Drive® 0405050 Ribbed Link Belt, B/17/5L Section, 5/8 in W Top, 25 ft L Outside, 5/8 in THK, Polyester/Polyurethane
Fenner Drives® Trantorque® 6202380 GT Series Collar Nut Keyless Bushing, 1-7/16 in Dia Bore, 2-3/8 in OD, 2-3/4 in OAL, Steel
From gears to cams, timing belt sprockets to conveyor rolls, climate control fan hubs to grinding wheels, the extensive range of Trantorque® keyless bushings - all with a single locking nut - offers easy to use options for mounting and adjusting position sensitive, zero backlash drive components and accessories.
Fenner Drives® Trantorque® 6202803UP GT Series Keyless Bushing, 16 mm Dia Bore, 38 mm OD, 38.1 mm OAL, Steel
The Trantorque® GT series 16 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 16 mm in diameter by means of a mechanical interference fit and transmits up to a maximum 209 N-m of torque.
Fenner Drives® Trantorque® TTQM1223 Mini Single Taper Keyless Bushing, 12 mm Dia Bore, 23 mm OD, 26 mm OAL, Steel
The Trantorque® mini series 12 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 12 mm in Dia by means of a mounted mechanical interference fit and transmits up to 81 N-m of torque. Trantorque® mini series 12 mm keyless bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending and/or radial loads. This product has exceptional concentricity and the ability to accommodate bending loads. The Trantorque® mini series has limited axial movement during installation. All Trantorque® units use a single hex nut for speed and simplicity of installation.
Recently Viewed
Grundfos 96508490 Chamber Stack Kit, For Use With CR 15-8 Vertical Multistage Centrifugal Pump
Grundfos 96508490 Chamber Stack Kit, For Use With CR 15-8 Vertical Multistage Centrifugal Pump
Sloan® 3305620 EL-1500 Sensor Replacement Kit, For Use With Regal® Urinal Flushometer, Domestic
NICD BATTERY ASSEMBLYS-STM90338>
Starrett® 98Z-12 98 Series Non-Magnetic Precision Uncalibrated Machinist's Level, 12 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, with wood case.
Angle Meter provides large readable scale for accurate readings from 0 Deg to 90 Deg in any quadrant. Integral magnetic base frees hands when used on ferrous surfaces. Meter measures any angle for pitch or slope and provides handy rise, run, angle and pitch information on back of the tool.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Double End, .500" Body Dia., .200" Contact Dia. and Pointed Contact.
