Emerson Electric

Ergonomically designed to maximize oil flow with minimal effort, the Model 418 is more than a chip pan and oiler -- it’s a total oiling system designed around the professional’s needs. The heavy-duty piston and seals ensure smooth operation in cold weather, and the sturdy die-cast pump deliver the performance you expect.

O-Z/Gedney Aluminum Conduit Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.

O-Z/Gedney Aluminum Conduit Bodies, Covers and Gaskets are used to connect and change direction of conduit runs. In addition to making bends in a conduit system, they allow connections for branch runs. These conduit bodies serve as pulling fittings and permit access to conductors for splicing and maintece.

The L2 Series air valves offer speed and high flow capacity in a compact design. They are available either with solenoid pilot, air pilot, or hand lever actuation. The L2's slim design (1 in body width) is ideal for inline mounting. The L2 may be mounted on one piece extruded manifolds from 2 to 12 stations, either as common supply with common exhaust or common supply with individual exhaust.

The Numatics Modular Flexiblok FRL products are available in four sizes. Our 14, 22, 32 and 42 series range in port size from 1/8 to 1 inch with flow rates from 30 to 300 scfm. Our 22, 32 and 42 series are cast from high strength lightweight aluminum making them perfect for applications such as robotic arms where total weight is at a premium. The Flexiblok advantage offers a square head design with integral mounting holes simplifying mounting by eliminating costly brackets. Direct connect modularity mounts one component to the next with a single O-Ring seal and two button head screws eliminating adapters and therefore cost and potential leak points.

The Numatics Modular Flexiblok FRL products are available in four sizes. Our 14, 22, 32 and 42 series range in port size from 1/8 to 1 inch with flow rates from 30 to 300 scfm. Our 22, 32 and 42 series are cast from high strength lightweight aluminum making them perfect for applications such as robotic arms where total weight is at a premium. The Flexiblok advantage offers a square head design with integral mounting holes simplifying mounting by eliminating costly brackets. Direct connect modularity mounts one component to the next with a single O-Ring seal and two button head screws eliminating adapters and therefore cost and potential leak points.

Numatics® FlexiBlok® F14D-02 FRL F14 Coalescing Filter, 1/4 in FNPT Port, 150 psi Pressure Range, 12 scfm Flow Rate, 0.3 micron, 40 to 120 deg F, Polycarbonate Bowl

The m series is a stainless steel body air cylinder line that is the perfect solution for tight design budgets. This cylinder is reliable and is designed and built to maximize performance. It will exceed all of your light duty cylinder application requirements. The m series comes standard with a multitude of value-added features such as stainless steel piston rods, roll formed threads at both ends of the piston rod and pre-lubed for non-lube added service. Furthermore, Numatics® has the design capabilities to customize a product for your specific application. These are just a sample of things that make the m series the superior interchangeable round body air cylinder line.

Numatics® 081SS400M 081/Mark 8 Double Direct Solenoid Valve With Flush Non-Locking Override, 1/8 in Port, 28 in Hg to 150 psig Pressure Rating, 37 scfm at 80 psig Flow Rate

Greenlee® TRI-GRIP™ 47608 Screw Holding Screwdriver, 3/32 in Slotted

Greenlee® Slug-Splitter SC® 7506 Hydraulic Knockout Punch Set, 10 ga Capacity, 10 Pieces, For Use With Hand, Foot and Hydraulic Pump, 1/2 to 2 in Conduit/Pipe, Stainless Steel

Greenlee® Slug-Splitter SC® 740H-1-7/32 Self-Centering Knockout Punch Unit, 1-7/32 in Dia Cutting, 30.5 in Conduit/Pipe

Greenlee® Slug-Splitter SC® 7308 Knockout Punch Set, 10 ga Capacity, 10 Pieces, For Use With Battery Powered, Hydraulic or High Leverage Ratchet Driver, 2 to 1/2 in Conduit/Pipe, Stainless Steel

Greenlee® Slug-Splitter SC® 7307 Hydraulic Kit Knockout Punch Kit, For Conduit/Pipe Dia: 1/2 to 2 in, 10 ga THK Max Stainless Steel

Greenlee® Slug-Splitter SC® 36490 Round Self-Centering Threaded Replacement Knockout Punch, 1.218 in Dia Cutting, Steel

Greenlee® Slug-Splitter SC® 36489 Round Replacement Knockout Die, Round Punch, 1.218 in Conduit/Pipe, 1.218 in ID Knockout, Stainless Steel, 10 ga

Greenlee® Slug-Splitter SC® 28163 Self-Centering Die Unit, Round Punch, 1-1/2 in Conduit/Pipe, Stainless Steel, 10 ga

Greenlee® Slug-Splitter SC® 28161 Round Conduit Die, Round Punch, 1-1/4 in Conduit/Pipe, Stainless Steel, 10 ga

Greenlee® Slug-Splitter SC® 28160 Round Self-Centering Replacement Knockout Punch, 1-11/16 in Dia Cutting, 1-1/4 in Conduit/Pipe

Greenlee® Slug-Splitter SC® 28159 Round Replacement Conduit Die, Round Punch, 1 in Conduit/Pipe, 1 in ID Knockout, Stainless Steel, 10 ga

Greenlee® Slug-Splitter SC® 28158 Round Self-Centering Replacement Knockout Punch, 1-11/32 in Dia Cutting, 1 in Conduit/Pipe

Greenlee® Slug-Splitter SC® 28157 Round Conduit Die, Round Punch, 3/4 in Conduit/Pipe, Stainless Steel, 10 ga

Greenlee® Slug-Splitter SC® 28156 Self-Centering Replacement Knockout Punch, 1.115 in Dia Cutting, 3/4 in/PG 21 Conduit/Pipe