Crosby Group
G-2130-7/8 CROSBY MATERIAL HANDLING GROUP 2-1/2" 55-TON SHACKLES
Heavy-duty, bolt-type carbon steel anchor shackle featuring a Working Load Limit (WLL) of 6.5 tons (14,300 lbs). It is built for permanent or long-term rigging and towing applications because its bolt, nut, and cotter pin design prevents the pin from loosening under high vibration or load movement.
G-291-1/2-3-1/4 CROSBY 1/2" X 3-1/4" EYEBOLTS
Material: Forged steel, quenched, and tempered. Application: Recommended primarily for straight, in-line pulls. Finish: Hot dip galvanized after threading Safety Factor: Fatigue rated at 1.5 times the Working Load Limit (WLL) for 20,0
G-291-1/2X6 CROSBY 1/2" X 6" H/D EYEBOLTS
Forged Steel Quenched & Tempered Regular Eye Bolt. Recommended For In-Line Pull. Fatigue Rated At 1-1/2 Times. The WLL at 20000 Cycles. Meets Or Exceeds All Requirements of ASME B30.26
G-291-1/4X2 CROSBY1/4" X 2" H/D EYEBOLTS
Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length
Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
G-291-3/4X12 CROSBY 3/4" X 12" EYEBOLTS
The Crosby G-291 3/4x12 (Crosby Stock Number 1043659) is a premier, heavy-duty Regular Nut Eye Bolt engineered specifically for straight-line, in-line industrial lifting and rigging applications.
G-291-3/4X15 CROSBY 3/4" X 15" EYEBOLTS
Working Load Limit (WLL): 5,200 lbs (2.6 tons) for secure, in-line pulls. Material: Forged carbon steel, which is quenched and tempered for high structural reliability. Coating: Hot-dip galvanized finish providing robust environmental and rust resistance. Threading: Standard unified coarse threading (UNC). Hardware Included: Shipped complete with a matching, hot-dip galvanized hex nut.
G-291-5/16X21/4 CROSBY MATERIAL HANDLING 5/16" X 2-1/4" EYEBOLTS GROUP
Series / Model: G-291 (Regular Nut, Straight-Line Pull) Diameter (Thread Size): 5/16" Shank Length: 2-1/4" Material: Forged Carbon Steel (Quenched & Tempered )Finish: Hot-Dip Galvanized
G-291-5/16X41/4 CROSBY MATERIAL HANDLING GROUP 5/16" X 4-1/4" EYEBOLTS
The Crosby G-277 Shoulder Nut Eye Bolts are premium forged lifting points engineered for secure through-bolted lifting applications. Each unit is forged from quenched and tempered steel, hot-dip galvanized for corrosion protection, and supplied with a heavy hex nut for proper clamping and seating. Designed for both in-line and angular loading (with capacity reduction), the G-277 meets or exceeds all ASME B30.26 requirements for identification, ductility, design factor, and proof load performance.
G-291-5/8X8 CROSBY 5/8" X 8" REG NUT EYEBOLTS
Brand / Manufacturer: Kito Crosby Product Series: G-291 (Regular Nut Eye Bolt without shoulder ) Crosby Stock Number: 1043515Thread / Shank Size: 5/8" - 11 UNC Shank Length: 8.00 inches Working Load Limit (WLL): 5,200 lbs (when used for a straight, in-line pull) Material & Finish: Quenched and tempered forged steel, hot-dip galvanized after threading.
G-291-7/8X5 CROSBY MATERIAL HANDLING GROUP 7/8" X 5" EYEBOLTS
The Crosby G-277 Shoulder Nut Eye Bolts are premium forged lifting points engineered for secure through-bolted lifting applications. Each unit is forged from quenched and tempered steel, hot-dip galvanized for corrosion protection, and supplied with a heavy hex nut for proper clamping and seating. Designed for both in-line and angular loading (with capacity reduction), the G-277 meets or exceeds all ASME B30.26 requirements for identification, ductility, design factor, and proof load performance.
G-334-1/2 CROSBY PEAR SHAPED MISSING LINKS
he Crosby G-341 1/2" (often typed as G3341/2) is a 1/2-inch hot-dip galvanized weldless pear-shaped sling link manufactured by Kito Crosby. It is primarily used as an intermediate or connecting point in wire rope and chain sling rigging configurations.
G-335-1/4 CROSBY1/4" MISSING LINKS
Trade Size: 1/4 inch (also covers 9/32" applications depending on the chain standard). Working Load Limit (WLL): 1,325 lbs (0.66 tons) with a standard 4:1 design factor .Material: Quenched and tempered drop-forged steel with a hot-dip galvanized finish for weather and corrosion resistance. Design: Interlocking halves are joined together by integral rivets rather than interlocking lugs, making the overall profile highly compact.
G-335-3/16 CROSBY MATERIAL HANDLING GROUP 3/16" MISSING LINKS
The Crosby G-335 3/16" is a hot-dip galvanized "Missing Link"® chain repair connecting link manufactured by Kito Crosby. It is specifically engineered to repair or join lengths of non-lifting chain in tie-down, towing, and general load securement setups
G-335-3/8 CROSBY 3/8" MISSING LINKSLING GROUP
Working Load Limit (WLL): 2,750 lbs (1.25 metric tons) Design Factor: 4:1 safety margin (Ultimate load is 4 times the WLL) dMaterial: Forged carbon steel, quenched and tempered for optimal durability
G-335-5/16 CROSBY 5/16" MISSING LINKS
The Crosby G-335 5/16" is a hot-dip galvanized, drop-forged carbon steel connecting link, famously trademarked as the "Missing Link"®. It is manufactured by the Kito Crosby Group under the specific Stock Number 1013138. It is primarily engineered to repair low-grade carbon steel chains or to bridge connections between a chain and end-fittings like master links or hooks.
G-335-5/8 CROSBY Product Type: Jaw & Eye Swivel (Model G-403).Size (Diameter): 1/2 inch.Working Load Limit (WLL): 3,600 lbs (1.8 short tons).Material: Forged carbon steel, quenched and tempered for maximum durability.Finish: Hot-dip galvanized for high co
The Crosby G-335 (5/8") is a heavy-duty, hot-dip galvanized "Missing Link"® replacement connecting link used to repair, connect, or extend 5/8-inch chains. Manufactured by The Crosby Group under stock number 1013236, this item serves as a temporary or permanent bridge for non-overhead rigging and tie-down applications.>
G-341-3/8 CROSBY 3/8" WELDLESS SLING LINKS
The Crosby G-341 1-3/8" is a weldless pear-shaped master sling link designed for high-capacity industrial rigging, wire rope assemblies, and chain sling connections.
G-402-3/8 CROSBY 3/8" EYE/EYE CHAIN SWIVELS
The Crosby G-402 3/8" Regular Swivel (Manufacturer Part Number: 1016055) is a premium, heavy-duty eye-to-eye rigging component designed primarily as a positioning device to prevent the twisting and binding of slings, wire ropes, and inline connections. It is critical to note that this specific model is a positioning device only and is not engineered to rotate while under active load.
G-403-1/2 CROSBY 1/2" JAW/EYE CHAIN SWIVELS
Product Type: Jaw & Eye Swivel (Model G-403).Size (Diameter): 1/2 inch. Working Load Limit (WLL): 3,600 lbs (1.8 short tons). Material: Forged carbon steel, quenched and tempered for maximum durability .Finish: Hot-dip galvanized for high corrosion resistance.
G-403-1/4 CROSBY 1/4" JAW/EYE CHAIN SWIVELS
Working Load Limit (WLL): 850 lbs (approx. 385 kg) Safety Factor: 5:1 design ratio (Ultimate break strength of 4,250 lbs)Material: Forged steel, quenched and tempered Finish: Hot-dip galvanized for enhanced corrosion resistance Connection Type: Jaw-to-eye configuration with a 1/4-inch pin and retention cotter pin Dimensions: 2.63 inches width between eyes, 0.69" to 0.88" eye length
G-403-3/4 CROSBY 3/4" JAW/EYE CHAIN SWIVELS
The Crosby G-403 3/4" is a heavy-duty Jaw End Swivel used as a positioning device in rigging, lifting, and wire rope assemblies. It connects inline components to prevent line twisting and reduce torque on rigging setups.
G-403-3/8 CROSBY 3/8" JAW/EYE CHAIN SWIVEL
The Crosby G-403 7/8" is a heavy-duty, hot-dip galvanized Jaw & Eye Positioning Swivel. Manufactured from quenched and tempered forged steel, this rigging component is specifically engineered as a positioning device to align your load assembly before lifting. It features a safety factor of 5:1 and is fully certified under the ASME B30.26 standard.
G-403-5/16 CROSBY5/16" JAW/EYE CHAIN SWIVEL
"Crosby 4035/16" does not pull up a direct product match in the official Kito Crosby rigging and lifting catalog. Because these numbers are highly relevant across multiple separate industrial part systems, it is likely a combination of a brand name and a specific size or a cross-referenced component.
G-403-5/8 CROSBY MATERIAL HANDLING GROUP 5/8" JAW/EYE CHAIN SWIVEL
The Crosby G-403 5/8" is a heavy-duty, hot-dip galvanized Jaw & Eye Swivel engineered as a positioning device to prevent lifting lines, wire ropes, and slings from twisting and binding.
Recently Viewed
The D1220-2 aluminum 20 ft extension ladder has a duty rating of 225 pounds and interlocking side rails. The TRACTION-TRED® D-rungs are slip resistant. Spring loaded locks operate smoothly for easy operation. Shoes rest flat or are held in spur position with SHU-LOK® feature. Mar resistant end caps help protect the surface ladder is leaning against. Exclusive ALFLO® rung joint means TWIST-PROOF® performance every time.
V-BELTOUTSIDE CIRCUMFERENCE >56-JASB53 >
BBI 451110 Partially Threaded Cap Screw, 1/2-13, 10 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451110 Partially Threaded Cap Screw, 1/2-13, 10 in L Under Head, 8 Grade, Alloy Steel, Plain
The Armstrong 28-048 is a 1-1/2" open-end service pump wrench manufactured in the United States. Known for its premium industrial build, this tool features a thin-pattern profile and an angled head to navigate highly restricted space
PRODIGY GLASSES NAVY MIRROR-SSS82116 >
.045" TWECO/BENZIL CONTACT TIPS--4 PACK - Fits Forney 304, 306 and 308 MIG welders and various MIG guns.
