Apex Tool Group
GEARWRENCH® 81910 Regular Length Non-Ratcheting Wrench Set, 5 Pieces, 1/4 to 7/8 in, Polished Chrome
GEARWRENCH family of flare nut wrenches are a great addition to the toolbox of anyone that needs to loosen and tighten hex nuts. They are available in ratcheting flex head, flex head, and standard pattern bodies. All wrenches have 2 sizes on each wrench, saving space in your tool box. They are manufactured from durable alloy steel and all feature a bright, full polish chrome finish. Ideal for use on hex nuts where tubes are present, such as a vehicle's fuel and brake lines.
GEARWRENCH® 81916 Long Length Combination Non-Ratcheting Wrench Set, 22 Pieces, 6 to 32 mm
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81917 Long Length Combination Non-Ratcheting Wrench Set, 18 Pieces, 1/4 to 15/16 in
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81918 Long Length Combination Non-Ratcheting Wrench Set, 15 Pieces, 15/16 to 1-1/4 in
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81919 Long Length Non-Ratcheting Combination Wrench Set, 44 Pieces
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81920 Long Length Combination Non-Ratcheting Wrench Set, 18 Pieces, 7 to 20 mm, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81921 Add-On Long Length Combination Non-Ratcheting Wrench Set, 5 Pieces, 1-1/8 to 1-1/2 in, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81933 Long Pattern Combination Wrench Set, 7 Pieces, 3/8 to 3/4 in, Polished Chrome
The GEARWRENCH combination wrenches are durable tools for most jobs. They are made from alloy steel with either a full polish or satin finish that resists rust & corrosion. The off-corner loading design on both ends provides a stronger grip on fasteners, reduces fastener rounding, and delivers up to 25% more torque to the fasteners. Sizes are stamped on the beam for quick, easy, & permanent identification. The box end is offset 15° for increased access to fasteners. Available in stubby & long pattern lengths and 6 & 12 point, the GEARWRENCH combination wrenches are a must have for every toolbox.
GEARWRENCH® 81990 Adjustable Dual Material Wrench Set, 3 Pieces, 6 to 10 in, Polished Chrome
We make GEARWRENCH® adjustable wrenches from alloy steel, with full-polish chrome heads and dual grip handles. The dual material handles provide greater ergonomic comfort during use compared to standard steel handle wrenches, are oil and solvent resistant, and are easy to wipe clean.
GEARWRENCH® 81991 Adjustable Large Non-Ratcheting Wrench Set, 3 Pieces, 12 to 18 in, Polished Chrome
GEARWRENCH® 81991 Adjustable Large Non-Ratcheting Wrench Set, 3 Pieces, 12 to 18 in, Polished Chrome
GEARWRENCH® 82006D Double-X™ Needle Nose Plier, Bent/Serrated Alloy Steel Jaw, 2.95 in L x 0.68 in W Jaw, 13.27 in OAL
GEARWRENCH® Double-X™ pliers are ideal for extremely confined spaces because of their compound joint that allows access with minimal handle movement and their narrow profiles. They also offer maximum reach without exceeding the center point of interference. The jaws open wider than the handle for added reach in confined work areas. Double-X™ pliers are available in a variety of styles, including: straight nose, bent nose, hose grip, internal and external snap ring, and both straight and bent hemostat.
GEARWRENCH® 82103 Mixed Plier Set, 4 Pieces, Serrated Jaw Surface
GEARWRENCH® offers a broad range of pliers, including tongue and groove, slip joint, and solid joint pliers in a variety of styles. They are made from alloy steel to provide improved strength and durability. Available with either a dual material grip or a dipped handle that is easy to clean, the GEARWRENCH® pliers are designed for ergonomic comfort during continuous use. We make GEARWRENCH® pliers for gripping, twisting, cutting, stripping, or bending wire and cable in professional, industrial and at-home uses.
GEARWRENCH® 82106 Double-X™ Plier Set, 2 Pieces, Serrated Jaw Surface
GEARWRENCH® Double-X™ pliers are ideal for extremely confined spaces because of their compound joint that allows access with minimal handle movement and their narrow profiles. They also offer maximum reach without exceeding the center point of interference. The jaws open wider than the handle for added reach in confined work areas. Double-X™ pliers are available in a variety of styles, including: straight nose, bent nose, hose grip, internal and external snap ring, and both straight and bent hemostat.
GEARWRENCH® 82115 Cable Plier, For Use With Flat Band Hose Clamps
These pliers are used to easily remove or install spring / flat band type hoe clamps. The cable allows the user to snake the clamp remover in and reach clamps in the most remote or difficult access areas. The innovative dual sided device will work on an expanded range of clamps from 0 to 2" and from 1" to 3".
GEARWRENCH® 82118 Push Button Plier Set, Tongue and Groove, 3 Pieces, ASME Specified
GEARWRENCH® push button tongue and groove pliers adjust quickly and easily, so less time is spent trying to find the correct position. Just place the top jaw on the work piece, push the button and slide the bottom jaw into a secure gripping position. These pliers have over two times the positions of regular tongue and groove pliers, making it easier to find the optimum handle position for a comfortable grip.
GEARWRENCH® 82124 Compound Action Plier Set, 2 Pieces, ASME Specified
The GEARWRENCH PivotForce compound action pliers require 40% less effort to cut than regular pliers due to the unique pivot point design which delivers a more efficient transition of power from the handle to the jaws. This means you don’t need to work as hard to make the same cuts in heavy-duty materials as you would with regular pliers.
GEARWRENCH® 82158 Push Button Tongue and Groove Plier, ASME Specified, 1-7/8 in Nominal, Forged Chrome Vanadium Steel V-Shape Jaw, 8 in OAL
GEARWRENCH® push button tongue and groove pliers adjust quickly and easily, so less time is spent trying to find the correct position. Just place the top jaw on the work piece, push the button and slide the bottom jaw into a secure gripping position. These pliers have over two times the positions of regular tongue and groove pliers, making it easier to find the optimum handle position for a comfortable grip.
GEARWRENCH® 82160 Push Button Tongue and Groove Plier, ASME Specified, 2-1/8 in Nominal, Forged Chrome Vanadium Steel V-Shape Jaw, 10 in OAL
GEARWRENCH® push button tongue and groove pliers adjust quickly and easily, so less time is spent trying to find the correct position. Just place the top jaw on the work piece, push the button and slide the bottom jaw into a secure gripping position. These pliers have over two times the positions of regular tongue and groove pliers, making it easier to find the optimum handle position for a comfortable grip.
GEARWRENCH® 82162 Push Button Tongue and Groove Plier, ASME Specified, 2-1/2 in Nominal, Forged Chrome Vanadium Steel V-Shape Jaw, 12 in OAL
GEARWRENCH® push button tongue and groove pliers adjust quickly and easily, so less time is spent trying to find the correct position. Just place the top jaw on the work piece, push the button and slide the bottom jaw into a secure gripping position. These pliers have over two times the positions of regular tongue and groove pliers, making it easier to find the optimum handle position for a comfortable grip.
GEARWRENCH® 82200-05 Rolling Wedge Bar, Rolling Head/Tapered Tip, 16 in OAL
GEARWRENCH offers a wide range of pry bars for almost every application. The aligning and rolling head pry bars are manufactured from high alloy steel for superior strength and durability. They are ideal for prying, positioning, aligning, and lifting applications. Use the tapered end for aligning applications. The curved blade of the aligning pry bars provides extra leverage, while the rolling head provides maximum leverage. Available in sets and individually, these pry bars can handle just about any prying or aligning application.
GEARWRENCH® 82204C-06 Mixed Plier Set, High Leverage, 6 Pieces, 13.8 in OAL, ASME Specified
The GEARWRENCH PITBULL line of pliers is GEARWRENCH's most advanced range of industrial pliers. The PITBULL line of pliers offer the industrial / automotive technician the best grip and cut day in and day out. They are forged from alloy steel and precision machined for long life and durability. The PITBULL pliers offer unique features such as the K9 Jaws which provide a strong grip, even when on a 35° angle and a high leverage joint design which provides up to 35% greater cutting power.
GEARWRENCH® 82208 Pry Bar, 8 in OAL, Cold Rolled Steel
Auto and industrial technicians need small, powerful, and quick tools to deliver performance in their ever-changing work environment. That’s why GEARWRENCH is forging ahead with these portable pry bars, each designed for a different size application and built with the strength that defines our brand.
GEARWRENCH® 82210 Pry Bar, 10 in OAL, Cold Rolled Steel
Auto and industrial technicians need small, powerful, and quick tools to deliver performance in their ever-changing work environment. That’s why GEARWRENCH is forging ahead with these portable pry bars, each designed for a different size application and built with the strength that defines our brand.
GEARWRENCH® 82216 Pry Bar, 16 in OAL, Cold Rolled Steel
Auto and industrial technicians need small, powerful, and quick tools to deliver performance in their ever-changing work environment. That’s why GEARWRENCH is forging ahead with these portable pry bars, each designed for a different size application and built with the strength that defines our brand.
Recently Viewed
10-LB BAG OF HYDRATED LIME-JWHLIME10>
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
1" X 3/4" GALVANIZED BELL REDUCER-JPW1X3/4GR >
20" X 20" X 12" BAG FILTERS-AAF704145120>
High-Pressure Hose, Premium Grade, 3/8 inch x 50ft Hose FOR75183
PRESSURE WASHER ACCESSORIES, HOSE, 3/8" X 50' HIGH PRESSURE 3000 PSI - 3/8 inch (9.53 mm) Male National Pipe Thread (MNPT) solid fitting and one 3/8 inch (9.53 mm) MNPT swivel fitting.
ASP-2432-S Industry Standard Clamping Collar, 2-Piece Construction, 2-7/16 in ID x 3-1/2 in OD x 3/4 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
