Apex Tool Group
Crescent® PB18 Wrecking Bar, 18 in OAL, Alloy Steel
Tackle your next renovation or demolition project with the latest innovations from Crescent. Our new tools are designed around powerful innovations that allow the user to attack projects from the best angle, adjust your tool to fit the task at hand, and just get the job done faster and easier than before. This series of tools offers a wide array of demolition and renovation tools. All Crescent pry bars have precision ground edges that make it easier to access tight spaces and help minimize damage to finished areas, as well as a crow bar end with a nail puller slot for standard crow bar use. Durable two-tone dual material grips provide comfort, control, and added safety.
Crescent® PHV1035CMEN P1000 Tape Measure, 16 ft L x 3/4 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PHV1316N P1000 Tape Measure, 16 ft L x 3/4 in W Blade, Steel Blade, 1/16 in, 1/32 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PHV1425DN P1000 Tape Measure, 25 ft L x 1 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PHV1425N P1000 Tape Measure, 25 ft L x 1 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PHV1433DMN P1000 Tape Measure, 33 ft L x 1 in W Blade, Steel Blade, 1/10 ft, 1/100 ft Graduation
Crescent built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PHV1433N P1000 Tape Measure, 33 ft L x 1 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PQR1312N Quikread® P1000 Tape Measure, 12 ft L x 3/4 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Each blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PQR1316N Quikread® P1000 Tape Measure, 16 ft L x 3/4 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Each blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PQR1425N Quikread® P1000 Tape Measure, 25 ft L x 1 in W Blade, Steel Blade, 1/16 in Graduation
Crescent Lufkin® built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Each blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
Crescent® PS5429C Pro Compound Action Diagonal Cutting Plier, 11 AWG THK Max Wire, 1-9/16 in L x 1-9/32 in W x 5/8 in THK Chrome Vanadium Steel, 8 in OAL
Increase your cutting power by 50% with the leverage-producing compound-action design of these Crescent Pro-Series 8-inch Diagonal Cutting Pliers. Made from chrome vanadium steel for increased durability, these pliers also have co-molded grips for added comfort and control.
Crescent® PS6549C Pro Compound Action Long Nose Plier, Serrated Chrome Vanadium Steel Jaw, 1-9/16 in L x 1-9/32 in W Jaw, 9 in OAL
Increase your cutting power by 50% with the leverage-producing compound-action design of these Crescent Pro-Series 9-inch Long Nose Cutting Pliers. Made from chrome vanadium steel for increased durability, these pliers also have co-molded grips for added comfort and control.
Crescent® PSMW18N Pro Series Measuring Wheel, 9999.9 ft Measuring, 4 in Dia Wheel, Telescoping Handle, 21 to 42 in OAL
Suitable for measuring vertical, horizontal or curved surfaces, the large Crescent Lufkin® Professional Centerline SAE Measuring Wheel displays surface dimensions in feet and inches for quick, accurate distance calculations. It features a 12-inch wheel with a rubber tire for superb traction on the uneven terrain of jobsites or long indoor expanses. The analog counter dial calibrated to the wheel counts to 10,000 ft. before rolling over to 0.
Crescent® PSMW48N Pro Series Contractor Measuring Wheel, 9999.9 ft Measuring, 12-1/2 in Dia Wheel, Telescoping Handle
Suitable for measuring vertical, horizontal or curved surfaces, the large Crescent Lufkin® Professional SAE Measuring Wheel displays surface dimensions in meters for quick, accurate distance calculations. It features a 12-inch wheel with a rubber tire for superb traction on the uneven terrain of jobsites or long indoor expanses. The analog counter dial calibrated to the wheel counts to 10,000 meters before rolling over to 0.
Crescent® R210CV 6-Position Tongue and Groove Plier, ASME B107.23M-2004, 1-13/16 in Nominal, Alloy Steel Straight Jaw, 10 in OAL
Crescent® R210CV 6-Position Tongue and Groove Plier, ASME B107.23M-2004, 1-13/16 in Nominal, Alloy Steel Straight Jaw, 10 in OAL
Crescent® R212CV 8-Position Tongue and Groove Plier, ASME B107.23M-2004, 2-1/4 in Nominal, Alloy Steel Straight Jaw, 12 in OAL
Crescent® R212CV 8-Position Tongue and Groove Plier, ASME B107.23M-2004, 2-1/4 in Nominal, Alloy Steel Straight Jaw, 12 in OAL
Crescent® R216CV 10-Position Tongue and Groove Plier, ASME B107.23M-2004, 4-1/2 in Nominal, Alloy Steel Straight Jaw, 16 in OAL
Crescent® R216CV 10-Position Tongue and Groove Plier, ASME B107.23M-2004, 4-1/2 in Nominal, Alloy Steel Straight Jaw, 16 in OAL
Crescent® R27CV 4-Position Tongue and Groove Plier, ASME B107.23M-2004, 1-5/16 in Nominal, Alloy Steel Straight Jaw, 7 in OAL
Crescent® R27CV 4-Position Tongue and Groove Plier, ASME B107.23M-2004, 1-5/16 in Nominal, Alloy Steel Straight Jaw, 7 in OAL
Crescent® RTZ210CG Tongue and Groove Pliers, ASME, 2.1 in Nominal, 1.25 L x 1.4 W x 0.38 T in Jaw Alloy Steel Jaw Straight Jaw, 10 in OAL
The Crescent Z2 line of pliers is Crescent's most advanced range of professional pliers. The Z2 line of pliers offer the professional the best grip and cut day in and day out. They are forged from alloy steel and precision machined for long life and durability. The Z2 pliers offer unique features such as the K9 Jaws which provide a strong grip, even when on a 35° angle and a high leverage joint design which provides up to 35% greater cutting power.
Crescent® RTZ210CGV Tongue and Groove Pliers, ASME, 2.1 in Nominal, 1.25 L x 1.4 W x 0.38 T in Jaw Alloy Steel Jaw V-Jaw Jaw, 10 in OAL
The Crescent Z2 line of pliers is Crescent's most advanced range of professional pliers. The Z2 line of pliers offer the professional the best grip and cut day in and day out. They are forged from alloy steel and precision machined for long life and durability. The Z2 pliers offer unique features such as the K9 Jaws which provide a strong grip, even when on a 35° angle and a high leverage joint design which provides up to 35% greater cutting power.
Crescent® RTZ212CGV Tongue and Groove Pliers, ASME, 2.6 in Nominal, 1.8 L x 1.85 W x 0.42 T in Jaw Alloy Steel Jaw V-Jaw Jaw, 12 in OAL
The Crescent Z2 line of pliers is Crescent's most advanced range of professional pliers. The Z2 line of pliers offer the professional the best grip and cut day in and day out. They are forged from alloy steel and precision machined for long life and durability. The Z2 pliers offer unique features such as the K9 Jaws which provide a strong grip, even when on a 35° angle and a high leverage joint design which provides up to 35% greater cutting power.
Crescent® SDD46V Dura Driver Mechanic's Screwdriver, 1/4 in Slotted, Tool Steel Shank, 10-3/4 in OAL, Rubber Handle, Bright Zinc Plated Blade
Crescent® SDD46V Dura Driver Mechanic's Screwdriver, 1/4 in Slotted, Tool Steel Shank, 10-3/4 in OAL, Rubber Handle, Bright Zinc Plated Blade
Crescent® SDDP44V Dura Driver Genuine Screwdriver, #2 Phillips® Point, Tool Steel Shank, 8-7/8 in OAL, Rubber Handle, Zinc Plated
Crescent® SDDP44V Dura Driver Genuine Screwdriver, #2 Phillips® Point, Tool Steel Shank, 8-7/8 in OAL, Rubber Handle, Zinc Plated
Crescent® ST100-07 Long Tape, 100 ft L Blade x 3/8 in W Blade
The Crescent Lufkin® steel construction long tapes deliver on the attributes surveyors, engineers, and construction professionals are looking for: accuracy, durability, and compact size. They also have performance features like an extra-wide two-way end hook and a a 3:1 gear ratio rapid-rewind hub with a handle purpose-built to prevent scraped knuckles. If you’re looking a great steel long tape, Crescent Lufkin has one made just for you.
Recently Viewed
Socket Driver Bit, 1/2 in Drive, 13/16 in
Klein® Cushion-Grip® 646-1/4 Nutdriver, 1/4 in, Hollow Shank, Cushion Grip Handle, ANSI/ASME Specified, Polished Chrome
Get to those deeply recessed nuts and bolts with Klein's hollow shank nut driver. The full hollow 6-Inch (152 mm) shaft fits over extra-long bolts and studs for most applications including stacked circuit boards. The comfortable Cushion-Grip™ allows for greater torque and enables tool to be used for hours without fatigue.
Drillco 429A160 4290 Construction Reamer, Imperial, 15/16 in Dia x 6-7/8 in L, 1-7/16 in Dia Hex Shank, Spiral Flute
Construction or Car Reamers are especially adapted for heavy duty reaming as encountered in the fabrication of structural steel assemblies. They are tapered at the point to facilitate entering of holes which are out of alignment.
