Greases
Sprayon® S00100000 LU™100 Medium Pressure Grease, 16 oz Aerosol Can, Liquid Form, White, 20 to 275 deg F
Super Lube® 41150 Heavy Duty Multi-Purpose Synthetic Grease, 14 oz Cartridge, Gel/Paste Form, Translucent White to Slightly Yellow, -45 to 450 deg F
Super Lube® 41150 Heavy Duty Multi-Purpose Synthetic Grease, 14 oz Cartridge, Gel/Paste Form, Translucent White to Slightly Yellow, -45 to 450 deg F
WD-40® SPECIALIST® 300240 Long Lasting Multi-Purpose Protective Lithium Grease, 10 oz Aerosol Can, Liquid, White, 300 deg F
WD-40® SPECIALIST® Protective White Lithium Grease is heavy-duty lubrication and protection against rust and corrosion. Our white lithium grease sprays on evenly as a liquid and sets dry for a thick, protective coating that won't run off. Effective in a temperature , WD-40 Specialist White Lithium Grease provides unbeatable protection with long-lasting lubrication on auto hinges, gears, sprockets, outdoor hinges, latches, overhead door tracks, pulleys, cables and guide rails. It's also excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant.
WD-40® SPECIALIST® 300394 Heavy Duty High Temperature Grease, 14 oz Cartridge, Green, 0 to 625 deg F
WD-40® SPECIALIST® Heavy-Duty High Temperature Grease was engineered to meet the demands of protecting high-speed bearings in applications involving high temperatures and heavy mechanical loads. It also excellent in cold weather and it useful for everyday applications around the home.
WD-40® SPECIALIST® 300400 Heavy Duty Extreme Pressure Grease, 14 oz Cartridge, Red, 0 to 620 deg F
WD-40® SPECIALIST® HEAVY-DUTY EXTREME PRESSURE GREASE gives surfaces the protection they need against wear and high loads. Effective at up to 600deg F, it's the solution of choice for a wide variety of applications, including heavy-duty automotive, farming, construction and industrial equipment, as well as boat-trailer and similar wheel bearings.
WD-40® SPECIALIST® 300417 Water Resistant Grease, 14 oz Cartridge, Blue, 0 to 620 deg F
WD-40® SPECIALIST® Marine Grade Water Resistant Grease provides effective protection for bearings and other moving parts where moisture challenges lubrication longevity and corrosion resistance. Ideal for a wide temperature range.
WD-40® SPECIALIST® 300424 Long Lasting Superior Performance True Multi-Purpose Grease, 14 oz Cartridge, Blue, >650 deg F
WD-40® SPECIALIST® Superior Performance True Multi-Purpose Grease is the only grease you'll ever need - a versatile solution with properties even lithium greases don't offer. It also provides marine-grade water resistance and protection against rust and corrosion. True Multi-Purpose Grease is an excellent choice for maintenance of farm and construction equipment, as well as lubricating machinery in damp conditions. Formulated with calcium sulfonate (OBCS) technology, it is interchangeable with other WD-40® Specialist® greases without compromising performance through cross-contamination.
Recently Viewed
Sealmaster® 550105 RCI Mounted Tapered Roller Insert Only, 2 in Dia Bore, 3.687 in OD, 3-1/2 in W
Proto® J49116S2 1-Piece Roll Pin Punch, 1/16 in Parabolic Punch, 3-3/4 in OAL, Steel
Milwaukee® 49-57-0877 Tang Drive Annular Cutter, 7/8 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 7/8 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee® 49-57-2060 Annular Cutter, 2-1/16 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
Milwaukee® 49-57-3250 Annular Cutter, 3-1/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49-57-0010.
Milwaukee® 49-57-1750 Annular Cutter, 1-3/4 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2-3/4 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2-3/4 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.