Grease Fittings & Adapters
Alemite® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Alemite® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1720-B Straight Thread Forming Grease Fitting, 1/8 in Special Taper Male Thread, 5/8 in OAL, 0.24 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1669-B Straight Thread Fitting, 1/8 in PTF Thread, 1-3/4 in OAL, 1-17/64 in L Shank, Trivalent Zinc Plated
Alemite® 1669-B Straight Thread Fitting, 1/8 in PTF Thread, 1-3/4 in OAL, 1-17/64 in L Shank, Trivalent Zinc Plated
Alemite® 1652-B Straight Thread Fitting, 1/4-28 Taper Thread, 11/16 in OAL, 23/64 in L Shank, Trivalent Zinc Plated
Alemite® 1652-B Straight Thread Fitting, 1/4-28 Taper Thread, 11/16 in OAL, 23/64 in L Shank, Trivalent Zinc Plated
Alemite® 1649-B 65 deg Thread Fitting, 1/8 in PTF Thread, 2-3/4 in OAL, 2-1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1649-B 65 deg Thread Fitting, 1/8 in PTF Thread, 2-3/4 in OAL, 2-1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1646-B1 65 deg Drive-In Grease Fitting, 45/64 in OAL, 7/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1646-B1 65 deg Drive-In Grease Fitting, 45/64 in OAL, 7/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1644-B Straight Thread Forming Grease Fitting Zerk, 1/8 in PTF SAE Special Extra Short Thread, 9/16 in OAL, 15/64 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1644-B Straight Thread Forming Grease Fitting Zerk, 1/8 in PTF SAE Special Extra Short Thread, 9/16 in OAL, 15/64 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1641-B Straight Thread Fitting, 1/4-28 Taper Thread, 35/64 in OAL, 3/16 in L Shank, Trivalent Zinc Plated
Alemite® 1641-B Straight Thread Fitting, 1/4-28 Taper Thread, 35/64 in OAL, 3/16 in L Shank, Trivalent Zinc Plated
Alemite® 1637-B1 45 deg Thread Fitting, 1/4-28 Taper Thread, 13/16 in OAL, 13/64 in L Shank, Trivalent Zinc Plated
Alemite® 1637-B1 45 deg Thread Fitting, 1/4-28 Taper Thread, 13/16 in OAL, 13/64 in L Shank, Trivalent Zinc Plated
Alemite® 1629-B Lubrication Fitting, 1/4-18 PTF Thread, 31/32 in OAL, 11/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1629-B Lubrication Fitting, 1/4-18 PTF Thread, 31/32 in OAL, 11/32 in L Shank, Steel, Trivalent Zinc Plated
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® 1627-B Straight Thread Fitting, 1/4 in PTF Thread, 7/8 in OAL, 27/64 in L Shank, Trivalent Zinc Plated
Alemite® 1618-B Straight Thread Fitting, 1/8 in Female NPTF Thread, 1 in OAL, 9/32 in L Shank, Trivalent Zinc Plated
Alemite® 1618-B Straight Thread Fitting, 1/8 in Female NPTF Thread, 1 in OAL, 9/32 in L Shank, Trivalent Zinc Plated
Alemite® 1612-B 65 deg Thread Fitting, 1/8 in NPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1612-B 65 deg Thread Fitting, 1/8 in NPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1610-BL Straight Thread Fitting, 1/8 in PTF Thread, 11/16 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1610-BL Straight Thread Fitting, 1/8 in PTF Thread, 11/16 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Recently Viewed
IKO BHA1310ZOH Inch Series Caged Heavy Duty Shell Standard Needle Roller Bearing With Oil Hole and Dust Cover, 13/16 in Dia Bore, 1-1/8 in OD, 1 Row, 5/8 in W, 13800 N Dynamic/18200 N Static Load
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
DuMONT Minute Man® replacement shims for use with Keyway Broaches are available for spares and to replace lost or damaged shims. The smallest Broaches cut in one pass and require no shim. Multiple pass Keyway Broaches are furnished with all necessary shims unless otherwise noted. Progressive shims may be purchased for use with our largest Keyway Broaches. A shim is required to compensate for the thickness removed following a Keyway Broach's cutting pass. The addition of a shim serves to move the Broach forward towards its standard finished cutting depth. Subsequent passes require the stacking of shims. Replacement or extra shims are provided in shim sets corresponding to the Broach size and letter designation in the quantity necessary to cut to standard depth. Please specify EDP number when ordering replacement or extra shims.
108 AIR CONDITIONER CORD-JWH528904 >
EATON CH215GFT Type CH Self-Test Ground Fault Circuit Breaker, 120/240 V AC, 15 A, 10 kA Interrupt, 2 Poles, Thermal Magnetic Trip
Eaton's residential CH circuit breakers provide premium overload protection. The Type CH circuit breakers trip to the OFF position, eliminating nuisance callbacks. The CHF family also includes a trip flag to differentiate between a trip and the breaker being turned off. The thermal-magnetic trip curve avoids nuisance tripping on mild overloads while reacting almost instantaneously to severe short-circuit conditions. Multiple breakers have an internal common trip connection to operate all poles simultaneously. Handles are marked with ON-OFF indication and ampere rating of the breaker.
MOLDED ON PLUG PROVIDES EXCELLENT STRAIN RELIEF. SAFE HANDLING AND DURABILITY. APPLIANCE STRAIN RELIEF INSTALLED ON CORD
-JWH508463 >
16' X 20' CANVAS TARPS-HAW15010 >
