Incandescent - Flood Bulbs
150-WATT THIN SHELL FLOOD BULBS-BUL150PARFL >
150-W 130-VOLT HARD SHELL FLOOD BULBS-BUL150PAR38FL >
150-WATT SHATTER-SHIELD BULB-BUL150BR38FLSS>
150-WATT 120-VOLT INSIDE-FROSTED ROUGH-SERVICE INCANDESCENT BULB
150-WATT CLEAR BULBS 1652-B-BUL150ACL >
150-WATT 130-VOLT IF SAFE-SHIELD BULB-BUL150A21SS >
150-WATT 130-VOLT INSIDE FROST BULBS-BUL150A130V >
150-WATT BULBS (150-A-21) #397-F-BUL150A >
15-WATT INSULATED FROSTED BULBS, 130 VOLTS
7-VOLT WEDGE TYPE BULBS-BUL147>
14-VOLT BULBS
MINIATURE BULBS
135-WATT 130-VOLT TRAFFIC BULBS
125-WATT INFRARED SAFE SHIELD HEAT BULB
120-WATT-SAVER FLOOD BULBS #852A-BUL120PARFL >
120-WATT 130-VOLT FLOODLIGHT BULBS
05374-A BULBS
1000-W 120-VOLT MOGUL BASE CLEAR BULB-BUL1000 >
100-WATT CLEAR REFLECTOR BULBS
100-W 130-VOLT HALOGEN FLOOD BULBS-BUL100PARHFL >
100-W 130-VOLT THIN SHELL FLOOD BULBS-BUL100PARFL >
100-WATT 130-VOLT BR-38 RED BULBS
100-A-RS/SS 100-watt 130 Volt Teflon Coat Bulb
100-WATT ROUGH SEVICE TEFLON COATED 130-V BULB
100-WATT ROUGH SURFACE BULBS--PACK OF 4-BUL100ARS4 >
Recently Viewed
V-BELTOUTSIDE CIRCUMFERENCE 60.1"-JAS2322V601 >
500-WATT 277-VOLT CLEAR QUARTZ BULBS-BULQ500T3QCL277V >
Dichtomatik 75115269 O-Ring, 258 Dash Number, 5.984 in ID x 6.262 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
3" DIE-CAST SQUEEZE CONNECTOR - APLSC300 >
Koyo BH-1612 Inch Series Open Ends Uncaged Drawn Cup Needle Roller Bearing, 1 in Dia Bore, 1-5/16 in OD, 3/4 in W, 6090 lbf Dynamic/10800 lbf Static Load
Drawn cup needle roller bearings support radial loads and reduce friction between rotating components, with a drawn outer shell serving as a raceway for the rollers. The small cross section of the drawn cup bearing provides high load-carrying capability with minimum required space. Drawn cup bearings are easily installed with a press fit in the housing.
Crosby® 1018017, G-213-1/4, Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
Crosby® 1018017 Anchor Shackle, 0.5 ton Load, 1/4 in, 5/16 in Dia Round Pin, Hot Dipped Galvanized
