Hole Punches
Proto® J48516LS2 1-Piece Long Super Duty Drive Pin Punch, 5/16 in Parabolic Punch, 8 in OAL, Steel
Proto® J49532S2 1-Piece Roll Pin Punch, 5/32 in Parabolic Punch, 5-1/4 in OAL, Steel
Proto® J48532LS2 1-Piece Long Super Duty Drive Pin Punch, 5/32 in Parabolic Punch, 8 in OAL, Steel
Proto® J49732S2 1-Piece Roll Pin Punch, 7/32 in Parabolic Punch, 5-7/8 in OAL, Steel
Proto® J507/16S2 1-Piece Starting Punch, 7/32 in Parabolic Punch, 6 in OAL, Steel
Proto® J967/16S2 1-Piece Drift Punch, 7/32 in Parabolic Punch, 10 in OAL, Steel
Proto® J48732LS2 1-Piece Long Super Duty Drive Pin Punch, 7/32 in Parabolic Punch, 8 in OAL, Steel
Recently Viewed
PIX A-42 IS A CLASSICAL V-BELT 44" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA42 >
LINE-UP PUNCH-MAY22008>
PIX A-69 IS A CLASSICAL V-BELT 71" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA69 >
PIX A-105 IS A CLASSICAL V-BELT, 107" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA105 >
If read as the model A-336 in a 1/2-inch size, this is an alloy steel chain connecting link used to assemble chain slings. Working Load Limit (WLL): 11,300 lbs. (Grade 63) or up to 15,000 lbs. depending on the exact Grade rating (Grade 80/100). Application: Fully rated and approved for overhead lifting.
1.625" X 2.627" X .500" OIL SEALS-NAT450069>
