Punch & Chisel Sets

New Crescent Cold Chisels, Wood Chisels, Nail Punches and Pin Punches are designed to deliver the best in durability, safety, and ease-of-use, with extra-large strike caps that are hardened to prevent mushrooming. Shanks of wood chisels and nail punches have a full metal core for extra durability, while cold chisels feature a recessed “control panel” and longer shanks for extra comfort, safety, and access. Tradesman nail punches deliver outstanding performance with oversize strike caps, an innovative dual flat side design that eliminates tool roll-off, and two-shot ergonomic grips for added comfort and control.

New Crescent Cold Chisels, Wood Chisels, Nail Punches and Pin Punches are designed to deliver the best in durability, safety, and ease-of-use, with extra-large strike caps that are hardened to prevent mushrooming. Shanks of wood chisels and nail punches have a full metal core for extra durability, while cold chisels feature a recessed “control panel” and longer shanks for extra comfort, safety, and access.

New Crescent Cold Chisels, Wood Chisels, Nail Punches and Pin Punches are designed to deliver the best in durability, safety, and ease-of-use, with extra-large strike caps that are hardened to prevent mushrooming. Shanks of wood chisels and nail punches have a full metal core for extra durability, while cold chisels feature a recessed “control panel” and longer shanks for extra comfort, safety, and access.

The GEARWRENCH 12-piece punch and chisel set includes: 4 cold chisels, a center punch, 4 pin punches, a long taper punch, and 2 starter punches ⏤ all the tools you need for a diverse range of professional work. The cold chisels are ideal for cutting metal rivets, bolts, and nuts. The pin punches are designed for final removal, like driving out pins and rivets. Use the center punch to mark center lines and pilot drill locations into metal. Install and remove pins and shafts with the long taper punch, or use the starter punch for starting and installing pins or rivets.

The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.

GENERAL® 1271ST Arch Punch Set, Arch Style, 1/4 to 1 in Punch, 7 Pieces

The #1280ST 6-piece hollow steel punch set is ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.

The #S1274 10-piece professional gasket punch set is ideal for punching holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet metal and other soft materials.

GENERAL® SPC75 Drive Pin Punch Set, 1/16 to 5/16 in Punch, 4 in OAL, 8 Pieces

GENERAL® SPC76 Drive Pin Punch Set, 1/8 to 3/8 in Punch, 8 in OAL, 5 Pieces

Tested to withstand the harshest environments, Ingersoll Rand is proud to offer pneumatic hammer chisels kits. All chisels are built from high-quality steel for the utmost in quality, strength, and durability. This 5-piece set includes the following chisels: tapered punch, flat chisel, panel cutter, sheet metal cutter, spot weld breaker. Pair with your Ingersoll Rand 114GQC Edge Series Air Hammer.

Mayhew™ 61044 Punch and Chisel Set, 8-1/2 in OAL, 14 Pieces

Mayhew™ 62065 X-Long Pin Punch Kit, 5 Pieces

Mayhew™ 62214 Center Punch Kit, 5 Pieces

Mayhew™ 62254 Imperial Roll Pin/Pilot Punch Set, 1/16 to 1/2 in Punch, 12 Punches, 12 Pieces

Mayhew™ 62287 Imperial Punch and Chisel Set, 5/8 to 3/4 in Chisel, 5/8 to 3/4 in Punch, 15 Punches, 5 Chisels, 20 Pieces

Mayhew™ 66002 Hollow Punch Set, 13 in OAL, 27 Pieces

Proto® J2S2 Punch and Chisel Set, Cape/Center/Cold/Diamond Point/Pin/Starting Style, 3/16 to 1/2 in Chisel, 1/16 to 3/8 in Punch, 7 Punches, 5 Chisels, 12 Pieces

Proto 26 piece punch and chisel set.

Proto 5 Piece Cold Chisel Set.

Proto® J96BS2 Punch Set, Drift Style, 3/8 to 5/16 in Punch, 5 Punches, 5 Pieces

Proto® J48005L Tether Ready Long Drive Pin Punch Set, Drive Pin, 5 5/32 to 1/4 in Punch, 8 in OAL, 5 Pieces

Proto® J48007 Super Duty Drive Pin Punch Set, Drive Pin Style, 5/32 to 1/4 in Punch, 7 Punches, 7 Pieces

Proto® J86B Cold Chisel Set, Cold Style, 5/16 to 7/8 in Chisel, 7 Chisels, 7 Pieces