Pipe & Tubing Cutters
Reed 03495 Mini Tubing Cutter, 1/8 to 1-1/8 in
For use in extremely tight places, mini tubing cutters require minimal swing around the tubing. Mini tubing cutters can be used on copper, steel, stainless steel and aluminum tubing. MC2GRIP has rounded corners and edges of the body for a more comfortable grip when rotating the cutter around tubing. After tightening the feed screw, mini tubing cutters work faster by providing a more consistent cutting force on the wheel.
RIDGID® 23498 Ratcheting Tubing Cutter, 1/8 to 1-5/8 in Nominal, Ergonomic Grip Handle
Make clean, precise cuts in a variety of 1/8 to 1-5/8-inch diameter multilayer plastic tubing (PVC, CPVC, PP, PEX, PE and rubber hose). The RC-1625's ratcheting design, combined with the advanced blade, work together to reduce the amount of hand force needed to cut through hard plastic material.
RIDGID® 30088, RC-2375 Ratchet Action Pipe and Tubing Cutter, 1/8 to 2-3/8 in, Ergonomic Grip Handle
Make clean, precise cuts in a variety of 1/8 to 2-3/8-inch diameter multilayer plastic tubing (PVC, CPVC, PP, PEX, PE and rubber hose). The RC-2375's ratcheting design, combined with the advanced blade, work together to reduce the amount of hand force needed to cut through hard plastic material.
RIDGID® 31622 150 Constant Swing Tube Cutter, 1/8 to 1-1/8 in, Ergonomic Handle
The RIDGID Model 150 Constant Swing Tubing Cutter is specifically designed to cut 1/8 to 1-1/8-inch diameter copper, brass, and aluminum tubing plus thin-wall conduit. Engineered for easy operation, the constant swing radius design helps you get accurate cuts in tight spaces.
RIDGID® 31632 Quick Acting Tubing Cutter, 1/4 to 1-5/8 in Nominal, Ergonomic Grip Handle
The RIDGID Model 151 Quick-Acting Tubing Cutter is specifically designed to cut 1/4 to 1-5/8-inch diameter aluminum and copper tubing. The quick-acting design makes it easy to operate and perform smooth cuts using one hand. Quick-release for easy change-out to cutting wheels for plastic or CSST (sold separately).
RIDGID® 31637, 151-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/8 to 1-1/4 in, Ergonomic Grip Handle
RIDGID® 31637, 151-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/8 to 1-1/4 in, Ergonomic Handle
RIDGID® 31642 Quick Acting Tubing Cutter, 1/4 to 2-5/8 in Nominal, Ergonomic Grip Handle
The RIDGID Model 152 Quick-Acting Tubing Cutter is specifically designed to cut 1/4 to 2-5/8-inch diameter aluminum and copper tubing. The quick-acting design makes it easy to operate and perform smooth cuts using one hand. Quick-release for easy change-out to cutting wheels for plastic (sold separately).
RIDGID® 31647, 152-P Quick-Acting Tubing Cutter With E-2155 Wheel, 1/4 to 2 in, Ergonomic Grip Handle
The RIDGID Model 152-P Quick-Acting Tubing Cutter is specifically designed to cut 1/4 to 2-inch diameter plastic tubing. The quick-acting design makes it easy to operate and perform smooth cuts using one hand. Quick-release for easy change-out to cutting wheels for metal (sold separately).
RIDGID® 31657, 154-P Quick-Acting Tubing Cutter With E-2156 Wheel, 1-1/2 to 4 in, Ergonomic Grip Handle
The RIDGID Model 154-P Quick-Acting Tubing Cutter is specifically designed to cut 1-1/2to 4-inch diameter plastic tubing. The quick-acting design makes it easy to operate and perform smooth cuts using one hand. Quick-release for easy change-out to cutting wheels for metal (sold separately).
RIDGID® 31662, 156 Quick-Acting Tubing Cutter, 4 to 6-5/8 in, Ergonomic Grip Handle
RIDGID® 31662, 156 Quick-Acting Tubing Cutter, 4 to 6-5/8 in, Ergonomic Handle
RIDGID® 32820 Heavy Duty Pipe Cutter, 1/8 to 2 in Nominal, Ergonomic Grip Handle
Make fast, clean cuts on steel pipes 1/8 to 2-inches in diameter. The Model 2-A single-wheel heavy-duty pipe cutter features an extra-long shank that protects adjustment threads, while an extra-large handle allows for quick and easy adjustments.
RIDGID® 32830, 3-S Heavy Duty Pipe Cutter, 1 to 3 in, Ergonomic Grip Handle
Make fast, clean cuts on steel pipes 1 to 3-inches in diameter. The Model 3-S single-wheel heavy duty pipe cutter features an extra-long shank that protects adjustment threads. Dual-handle design allows for two-person leverage on larger pipes.
RIDGID® 32840 Heavy Duty Pipe Cutter, 2 to 4 in Nominal, Ergonomic Grip Handle
Make fast, clean cuts on ssteel pipes 2 to 4-inches in diameter. The Model 4-S single-wheel heavy-duty pipe cutter features an extra-long shank that protects adjustment threads. Dual-handle design allows for two-person leverage on larger pipes.
RIDGID® 32850, 6-S Heavy Duty Pipe Cutter, 4 to 6 in
Make fast, clean cuts on steel pipes 4 to 6-inches in diameter. The Model 6-S single-wheel heavy duty pipe cutter features an extra-long shank that protects adjustment threads. Dual-handle design allows for two-person leverage on larger pipes.
RIDGID® 32870 42-A 4-Wheel Heavy Duty Pipe Cutter, 3/4 to 2 in, Ergonomic Handle
RIDGID® 32870 42-A 4-Wheel Heavy Duty Pipe Cutter, 3/4 to 2 in, Ergonomic Handle
RIDGID® 32895, 202 Heavy Duty Wide-Roll Pipe Cutter, 1/8 to 2 in
Make fast, clean cuts on steel pipes 1/8 to 2-inches in diameter. The Model 202 two-wheel heavy duty pipe cutter features extra-wide rolls for true tracking and cleaner cuts. The wide rolls are also designed for use with power drives.
RIDGID® 32900, 246 Ratchet Action Soil Pipe Cutter, 1-1/2 to 6 in
Cuts on No Hub® and service weight cast iron and clay soil pipe 1-1/2 to 6-inches in diameter; 4-inch water mains; 2 to 5 inch extra heavy-duty cast iron soil pipe; as well as 4 to 6-inch concrete pipe. The RIDGID 246 soil pipe cutter features an integral ratchet handle centered on the pipe for easier pipe cutting in trenches, allowing you to keep trench sizes to a minimum.
RIDGID® 32905, 228 Soil Pipe Assembly Tool, 1-1/2 to 8 in
Easy Assembly of Y fittings, tee and elbow, as well as straight lengths from any angle. The 228 soil pipe assembly easily accommodates all 1-½ to 8-inch gasketed soil pipe without requiring extra attachments.
RIDGID® 32910 Screw Feed Tubing Cutter, 1/8 to 1 in Nominal, Ergonomic Grip Handle
The RIDGID Model 10 Screw Feed Tubing Cutter is designed to make clean and smooth cuts on 1/8 to 1-inch diameter copper, brass, aluminum and thin-wall steel.
RIDGID® 32915, 10 Tubing and Conduit Cutter With E-1240 Wheel, 1/8 to 1 in
The RIDGID Model 10 Screw Feed Tubing Cutter is designed to make clean and smooth cuts on 1/8 to 1-inch diameter stainless steel.
RIDGID® 32920 Screw Feed Tubing Cutter, 3/16 to 1-1/8 in Nominal, Ergonomic Grip Handle
The RIDGID Model 15 Screw Feed Tubing Cutter is designed to make clean and smooth cuts on 3/16 to 1-1/8-inch diameter copper, brass, aluminum and thin-wall steel.
RIDGID® 32925, 15 Tubing and Conduit Cutter With E-1240 Wheel, 3/16 to 1-1/8 in
The RIDGID Model 15 Screw Feed Tubing Cutter is designed to make clean and smooth cuts on 3/16 to 1-1/8-inch diameter stainless steel.
RIDGID® 32930 Screw Feed Tubing Cutter, 5/8 to 2-1/8 in Nominal, Ergonomic Grip Handle
The RIDGID Model 20 Screw Feed Tubing Cutter is designed to make clean and smooth cuts on 5/8 to 2-1/8-inch diameter copper, brass, aluminum and thin-wall steel.
RIDGID® 32975 Close Quarter Tubing Cutter, 1/8 to 5/8 in Nominal, Ergonomic Grip Handle
The name says it all: the RIDGID Model 103 Close Quarters Tubing Cutter is specifically designed for use in restricted spaces on 1/8 to 5/8-inch diameter hard or soft copper, aluminum, brass or plastic tubing. The lightweight slide, wheel housing and large feed screw knob allow for smooth control of cutting pressure for clean cuts.
Recently Viewed
205-SFF Light Radial Deep Groove Ball Bearing, 25 mm Dia Bore, 52 mm OD, 1 Rows, 15 mm W, 14000 N Dynamic/7800 N Static Load
The MRC 205SFF is a single-row deep groove radial ball bearing manufactured by MRC (a brand of SKF). It belongs to the 200-S Light Series (equivalent to a standard 6205 series bearing) and is heavily utilized for applications managing moderate-to-heavy radial loads, two-directional thrust loads, or a combination of both. Technical Specifications According to data sheets from Motion Industries, the bearing features the following standard dimensions and limits: Bore Diameter (Inner): 25 mm Outside Diameter: 52 mm Overall Width: 15 mm Closure Type: Double shielded ("FF" or "SFF" nomenclature represents two non-contact metal shields) Maximum Speed: 15,000 RPM (Oil) / 12,000 RPM (Grease)Load Capacities: 3,150 lb. radial dynamic / 1,750 lb. radial static Internal Clearance: C3 (standard loose fit for thermal
5/5-V-2800-F 5-groove 5-v-belt QD F-bushing Sheave
5-GROOVE 5-V-BELT QD F-BUSHING SHEAVE - IDC55V2800F>
H-PITCH X 80" DOUBLE TIMING BELT - JAS800H125>
Browning® 767668 VS 200 Standard-Duty Straight Bore Ball Bearing Insert, 1-1/2 in Dia Bore, 3.1496 in OD, 1-15/16 in W, 7340 lb Dynamic/4467 lb Static Load
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
F4B-SXR-40M Dodge® 125671 208 Series Normal Duty Non-Expansion Ball Bearing Unit, 40 mm Dia Bore, 101.6 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 130.3 mm OAL/Dia
F4B-SXR-40M Dodge® 125671 208 Series Normal Duty Non-Expansion Ball Bearing Unit, 40 mm Dia Bore, 101.6 mm L Bolt Center-to-Center, 4-Bolt Base Flange Mount, 130.3 mm OAL/Dia
26 TOOTH SPROCKETS FOR #60 CHAIN-BRWH6026X11/4 >
