Standard Screwdrivers
T-20 TORX SCREWDRIVER--CARDED -JWH340580 >
T-25 TORX SCREWDRIVER -JWH340633 >
T-30 TORX SCREWDRIVER--CARDED -JWH340731 >
1/4" X 2" SLOTTED PHILLIP OFFSET SCREWDRIVER-JWH341819 >
1" X 2" SLOTTED PHILLIP OFFSET SCREWDRIVER-JWH341827 >
1/4" SLOTTED OFFSET SCREWDRIVER-JWH341835 >
VERMONT AMERICAN MULTI-BIT 7" SCREWDRIVER-JWH349402 >
1/8" X 2.5" SLOT POCKET SCREWDRIVER-JWH376191 >
10-IN-1 SCREWDRIVER-JWH382272 >
4-IN-1 IMPORT SCREWDRIVER-JWH382523 >
6-IN-1 BLUE SCREWDRIVER-LUT61BLUE>
6-IN-1 GREEN SCREWDRIVER-LUT61GRN >
6-IN-1 ORANGE SCREWDRIVER-LUT61ORA>
6-IN-1 RED SCREWDRIVER-LUT61RED >
5/16" X 6" STANDARD TIP, ROUND SHANK SCREWDRIVER-ARS66103 >
3/8" X 8" STANDARD TIP, ROUND SHANK SCREWDRIVER-ARS66106 >
66-108 ARMSTRONG TOOLS 3/8" X 10" Standard Tip, Round Shank Screwdriver
3/8" X 10" STANDARD TIP, ROUND SHANK SCREWDRIVER
66-109 Armstrong Tools 3/8" X 12" Standard Tip, Round Shank Screwdriver
3/8" X 12" STANDARD TIP, ROUND SHANK SCREWDRIVER-ARS66109 >
3/16" X 4" STANDARD TIP SQUARE SHANK SCREWDRIVER
1/4" X 4" STANDARD TIP, SQUARE SHANK SCREWDRIVER-ARS66208 >
1/4"X8" SQUARE SHANK STD/TIP SCREWDRIVER
1/4" X 6" STANDARD TIP SQUARE SHANK SCREWDRIVER-ARS66211 >
5/16" X 8" STANDARD TIP SQUARE SHANK SCREWDRIVER-ARS66214 >
66-217 ARMSTRONG TOOLS 5/16" X 6" Standard Tip Square Shank Screwdriver
5/16" X 6" STANDARD TIP SQUARE SHANK SCREWDRIVER
Recently Viewed
2-GRV C-BELT SHEAVES-BRW2TC106 >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB131K>
SH-1.1/16 Sh-1-1/16" Quick Disconnect Bushing With 1-1/16" Bore, 1/4" X 1/8" Keyway-brwsh1.
SH-1-1/16" QUICK DISCONNECT BUSHING WITH 1-1/16" BORE, 1/4" X 1/8" KEYWAY-BRWSH1.1/16 >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
PIXA54K>
PRECUT FENDER BACKING PLATE SINGLE-RED10FB32R >
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA58K>
