Wire Tong Accessories
Klein Tools W/O ROPES OR HOOKS BLOCK/TACKLES KLE 267
BLOCK WITH OUT ROPES OR HOOKS
Klein Tools REPLACEMENT TAPPING BLADES KLE 628-20
Replacement Tap for Cat. No. 627-20
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 10-24, 12-24, 1/4-20
Klein Tools REPLACEMENT TAPPING BLADES KLE 626-32
Replacement Tap for Klein Tools Triple Tap and Six In One Models 625-32, 627-20, 623-32 and 626
Lightweight, durable design
Multiple applications
Sold in quantity of 2
#6, #8, #10 thread spacing
Tap Sizes 10-32, 8-32, 6-32
Klein Tools REPLACEMENT TAPPING BLADES KLE 626-24
Replacement Tap for Cat. No. 625-24 (Triple Taps)
Lightweight, durable design
Multiple applications
Sold in quantity of 2
Tap sizes: 6-32, 8-32, 10-24
Klein Tools FRGD .12-.37EHS CABLE CHICAGO GRIP KLE 1613-40
Works with aircraft, EHS, messenger and guy strand cable
Designed for cable sizes from 0.12 to 0.37-Inch (3.05 to 9.40 mm) and has max safe load of 4500-Pound (2041 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Made in USA
For larger conductors, see our grips with round inside-jaw contour
Klein Tools CONDUIT REAMERS KLE 19352
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
Klein Tools ANCHOR HOOKS KLE 258
Forged hook with 5/8-Inchg (1.6 cm) Eye I.D. and 1-7/8-Inch (4.8 cm) Throat Opening
Maximum safe load 750-pounds (340 kg)
Standard on Klein Block & Tackle Packages (Cat. Nos. 1802-30 and H1802-30)
Made in USA
These are NOT occupational protective devices. NOT for human support
Klein Tools 4-1/4" HEAVY 50-AMP CLIPS KLE 19325
Reamer locks onto screwdrivers, reams and smooths thin-wall conduit
Reams ID and OD at the same time
Two set-screws to fit round- or square-shank screwdrivers
Fits up to 3/8-Inch (10 mm) keystone-tip screwdrivers
Made in USA
NOT for use on power tools
Designed to be used on Electrical Metallic Tubing (EMT)
Klein Tools 2" COPPER ALLIGATOR CLIPS KLE 19311
2" COPPER ALLIGATOR CLIPS
Klein Tools 2-3/8" COPPER ALLIGATOR CLIPS KLE 69311
2-3/8" COPPER ALLIGATOR CLIPS (NON-INSULATED)
Klein Tools 2-3/8" ALLIGATOR CLIPS KLE 59311
2-3/8" COPPER ALLIGATOR CLIPS (EA)
Klein Tools 2-3/8" ALLIGATOR CLIPS KLE 59310
2-3/8" STEEL ALLIGATOR CLIPS (EA)
Klein Tools 1-3/32" STEEL MINI-ALLIGATOR CLIPS KLE 19312
1-3/32" STEEL MINI-GATOR CLIPS
Klein Tools .50-.75 WIRE PULLER CHICAGO GRIPS KLE 1628-17
Used for Aircraft, EHS, Messenger, Guy Strand cables
Designed for 0.50 to 0.75-Inch (12.7 to 19.05 mm) diameter cable sizes with max safe load of 15,000-Pound (6803 kg)
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger conductors, see our grips with round inside-jaw contour
Made in USA
Locking handle keeps jaw open while grip is placed on cable with a hot stick
Klein Tools .125"-.50" FORGED CABLE HAVEN GRIP KLE 1604-20
Designed for use when light, compact grip is desired and where conductor damage is not a factor
Works with Messenger and Guy Strand cable diameter range of 0.125 to 0.500-Inch (3.18 to 12.70 mm)
Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area
Maximum safe load of 5000-Pound (2268 kg)
Made in USA
Individually hand inspected and actuated for proper function
Rigorously tested and pulled to rated load to ensure the highest quality and reliability
CLAMP-AID GREAT VALLEY INDUSTRIES
RED CLAMP-AID UP TO 1/2" PK/20-GVICLAMPAID >
CG-87125-S APPLETON
CORD AND CABLE CONNECTOR, 1-1/4" HUB, 1-1/16" X 1-3/4, .875 - 1.000 CABLE RANGE-APLCG87125S >
CG-87100 APPLETON
CORD AND CABLE CONNECTOR,1" HUB, 15/16" X 1-3/4, .875 - 1.000 CABLE RANGE-APLCG87100 >
CG-75100 APPLETON
CORD AND CABLE CONNECTOR, 1" HUB, 15/16" X 1-3/4, .750 - .875 CABLE RANGE-APLCG75100 >
CG-6275 APPLETON
CORD AND CABLE CONNECTOR, 3/4" HUB 7/8" X 1-38, .625 - .750 CABLE RANGE-APLCG6275 >
CG-62100 APPLETON
CORD AND CABLE CONNECTOR,1" HUB, 15/16" X 1-3/8, .625 - .750 CABLE RANGE-APLCG62100 >
CG-50100 APPLETON
CORD AND CABLE CONNECTOR, 1" HUB, 15/16" X 1-3/8, .500 - .625 CABLE RANGE-APLCG50100 >
CG-2575 APPLETON
CORD AND CABLE CONNECTOR, 3/4" HUB, 7/8" X 1-1/4, .250 - .375 CABLE RANGE-APLCG2575 >
Recently Viewed
Littelfuse® POWR-GARD® CNN275 Fast Acting Fuse, 275 A, 48 V DC, 2500 A Interrupt
CNN_E fuses are rated for applications up to 80 VDC. As fork lift trucks voltages increase, circuit protection needs to be rated higher than the standard CNN products to handle the increased voltage. The CNN_E is considered very fast acting for quicker reaction time.
The Grey Pneumatic 3/4" Drive x 20mm Standard Socket (3020M) is a premium-quality socket designed for demanding tasks in automotive, industrial, and construction settings. Crafted from heat-treated chrome molybdenum steel, this socket delivers exceptional durability and strength. Its innovative design ensures optimal torque transfer and improved accessibility in tight spaces.
KEY FEATURES AND BENEFITS:
Superior Durability: Constructed from heat-treated chrome molybdenum steel for exceptional strength and longevity.
Enhanced Torque Transfer: Optimized design for efficient power transmission, allowing for increased torque application.
Improved Accessibility: Thinner socket walls provide better access to hard-to-reach areas.
Reduced Fastener Damage: Precision-engineered grip ensures minimal risk of rounding off or damaging fasteners.
Versatile Applications: Suitable for a wide range of automotive, industrial, and construction tasks.
SPECIFICATIONS:
Drive Size: 3/4 inch
Socket Size: 20 millimeters
Material: Chrome-molybdenum alloy steel
Length: 52 millimeters
Bolt Clearance Depth: 27 millimeters
Socket Depth: 14 millimeters
Type: High torque, 6-point, standard length, metric, hex
Packaging: Poly bag with barcode
Browning® 1078385 Split Taper Bushing, 1-5/16 in Dia Bore, 1.57 in Small End/1.625 in Large End Dia Barrel, 2-1/2 in Dia Flange, 1-1/4 in OAL, Sintered Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
8020-HTL Dodge® 099057 Taper-Lock® Flexible Chain Coupling Flange, 80 Chain, 3-1/4 in Bore Dia 20 Teeth, 7.3 in OD, Steel
Dodge® 099057 Taper-Lock® Flexible Chain Coupling Flange, 80 Chain, 3-1/4 in Bore Dia 20 Teeth, 7.3 in OD, Steel
STRAP CUTTERS-JET220024>
18" X 11" X 6" BLUE NESTING TOTE - AKR35180B>
