NAILS FOR AIR POWERED, ELECTRIC, & NAILERS
3" X .120" COATED STRIP NAIL--B/2000 - PAS097971 >
121 X 3-1/4 PASLODE
12 STRIP NAIL-PAS121X31/4>
128 X 3-1/2 PASLODE
16-D 28DG STRIP NAIL-PAS128X31/2>
15-GA 2-1/4" SENCO BRAD NAIL--BX/4000
POWDER HAMMER DRIVE PINS--PACK/100 - JWH300846>
3 X .131 RD HD STICK NAIL-JWH304816>
POWER HAMMER RED LOAD--BOX OF 100 - JWH316903 >
3/4" UNISET POWER NAILS--BOX OF 100-JWH323545 >
2.5" UNISET HAMMER NAILS--BOX OF 100-JWH328862 >
.22-CALIBER GREY POWER LOAD-JWH328933 >
3" UNISET HAMMER NAILS--BOX OF 100-JWH331570 >
.300 POWDER HAMMER 1" HEAD PIN-PWR50150>
POWDER ACTIVATED .300 X 1-1/4 HEAD PINS-PWR50370>
22-CALIBER BROWN LOADS-PWR50502>
.25-CAL POWDER HAMMER DISK LOADS-PWR50536>
.25-CAL POWDER HAMMER RED LOADS-PWR50538
27-CALIBER GREEN SAFETY STRIPS-PWR50622>
10-D .120" GALV/COATED PIN SHANK-BOSAC10DGAL>
12-D PLAIN SHANK COATED COIL NAILS-BOSAC12D>
12-D .120" GALV/COATED PIN SHANK-BOSAC12DGAL>
6-D .099" GALV/COATED PIN SHANK-BOSAC6D099GAL>
BOSTITCH NAILS-BOSAC7D099>
7-D .090" PLAIN SHANK COATED NAILS-BOSAC7DC090BDP>
BOSTITCH NAILS-BOSAC8D099>
Recently Viewed
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES. IN THE SAME MANNER THESE BELTS ARE ADVANTAGES WHERE REVERSE IDLERS HAVE TO BE USED BECAUSE OF SMALLER HEIGHTS.
-PIXA66K>
HYDRAULIC PUNCH DRIVER SETS-GRN7804SB>
Armstrong® 20-236 Deep Length Socket, 1/2 in Square Drive, 1-1/8 in, 6 Points
1/2" AIR/PNEUMATIC IMPACT WRENCH - FLO1250K>
TIRE GAUGE-RGL19080 >
MORSE® 50855 5376 Straight Flute Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 2-1/4 in D Cutting, 2 Flutes, Solid Carbide
MORSE® 50855 5376 Straight Flute Drill Bit, 1/2 in Drill - Fraction, 0.5 in Drill - Decimal Inch, 2-1/4 in D Cutting, 2 Flutes, Solid Carbide
