MACHINERY EYE BOLTS WITHOUT SHOULDER
1/4" X 5" ZINC EYEBOLT-NTL159889 >
1/4" X 6" ZINC EYEBOLT-NTL159897 >
1/2" X 4" ZINC EYEBOLT-NTL167155 >
1/2" X 6" ZINC PLATED EYEBOLT-NTL167163 >
1/2" X 10" ZINC EYEBOLT-NTL167189 >
3/16" X 1-1/2" EYEBOLT-NTL221051 >
5/16" X 5" ZINC-PLATED EYEBOLT-NTL221234 >
3/8" X 3" ZINC-PLATED EYEBOLT-NTL221259 >
1/2" X 12" ZINC-PLATED EYEBOLT-NTL221341 >
1/2" X 8" ZINC-PLATED EYEBOLT-NTL221531 >
5/16" X 5" HOOK BOLT-NTL221689 >
3/8" X 7" HOOK BOLT WITH NUTS-NTL221697 >
89-002 Armstrong Tools 5/16" X 1-1/8" Lifting Eyes (eye Bolt) Plain
5/16" X 1-1/8" LIFTING EYES (EYE BOLT) PLAIN PATTERN
89-003 Armstrong Tools 3/8" X 1-1/4" Lifting Eyes (eye Bolt) Plain
3/8" X 1-1/4" LIFTING EYES (EYE BOLT) PLAIN PATTERN
89-004 Armstrong Tools 7/16" X 1-3/8" Lifting Eyes (eye Bolt) Plain
7/16" X 1-3/8" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89004 >
1/2" X 1-1/2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89005 >
89-007 Armstrong Tools 5/8" X 1-3/4" Lifting Eyes (eye Bolt) Plain
5/8" X 1-3/4" LIFTING EYES (EYE BOLT) PLAIN PATTERN
3/4" X 2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89008 >
89-010 Armstrong Tools 1" X 2-1/2" Lifting Eyes (eye Bolt) Plain
1" X 2-1/2" LIFTING EYES (EYE BOLT) PLAIN PATTERN-ARS89010 >
Material: Forged steel, quenched, and tempered. Application: Recommended primarily for straight, in-line pulls. Finish: Hot dip galvanized after threading Safety Factor: Fatigue rated at 1.5 times the Working Load Limit (WLL) for 20,0
Forged Steel Quenched & Tempered Regular Eye Bolt. Recommended For In-Line Pull. Fatigue Rated At 1-1/2 Times. The WLL at 20000 Cycles. Meets Or Exceeds All Requirements of ASME B30.26
Crosby Eye Bolt, Series: G-291, Measurement System: Imperial, 1/4 in Thread, 2 in Shank Length, Forged Steel, Hot Dipped Galvanized, 1/2 in ID Eye, 1 in OD Eye, UNC Thread, 3.06 in Overall Length, 650 lb Working Load, 1-1/2 in Thread Length
Fatigue rated at 1-1/2 times the working load limit at 20000 cycles
Hot dip galvanized after threading (UNC)
Furnished with standard hot dip galvanized hex nuts
Recommended for in-line pull
Importantly, these bolts meet other critical performance requirements including fatigue life, impact properties and material traceability
The Crosby G-291 3/4x12 (Crosby Stock Number 1043659) is a premier, heavy-duty Regular Nut Eye Bolt engineered specifically for straight-line, in-line industrial lifting and rigging applications.
Working Load Limit (WLL): 5,200 lbs (2.6 tons) for secure, in-line pulls. Material: Forged carbon steel, which is quenched and tempered for high structural reliability. Coating: Hot-dip galvanized finish providing robust environmental and rust resistance. Threading: Standard unified coarse threading (UNC). Hardware Included: Shipped complete with a matching, hot-dip galvanized hex nut.
Recently Viewed
WEP14150 QUICK 6" PADDLE GRINDER-MTB01451P >
RIDGID® 42370 360 Full Floating Self Centering Cutter, For Use With: Model 300 Power Drive, 1/8 to 2 in
RIDGID® 42370 360 Full Floating Self Centering Cutter, For Use With: Model 300 Power Drive, 1/8 to 2 in
Freud® Precision Shear™ PB-002 Forstner Drill Bit, 3/8 in Dia, 3-1/2 in OAL, 1/4 in Shank
New Precision Shearâ„¢ forstner bits feature a double ground, razor sharp serrated edge that slices throughout the rotation of the bit for less splintering and chipping, producing flawless flat-bottom holes. This unique geometric design has multiple cutting edges that produce greater shearing action, allowing for faster rotational speeds and more efficient cutting. Competitive forstner bit designs produce small chips and dust that collect in the cutting area, increasing friction and heat, thus causing the bit to dull quickly. Those designs also create holes with rough edges that require sanding. In addition Precision Shearâ„¢ forstner bits has serrated edges.
JT21 staples are the T50's little brother. Although often referred to as light duty, thereâ„¢s really nothing light about them. Built with the same quality and precision as the T50, these staples utilize a thinner wire in a smaller staple format to deliver great holding power. They are exceptionally easy to fire, making JT21 staples a favorite with crafters, women, and those with limited grip strength. Used for general home repairs, crafting, art projects, and upholstery. Still proudly made in the USA.
16-GAL WD-1851 WET/DRY SHOP VACUUM WITH CART - RIG31693>
1.00"-ODX7.50" X .105"EXT/SPRING-WBJ102 >
