GRADE 8.8
8-MM X 1.25X50-MM HEX HEAD CAPSCREW-MET93108050 >
8-MM X 1.25X55-MM HEX HEAD CAPSCREW-MET93108055 >
8-MM X 1.25X75-MM HEX HEAD CAPSCREW-MET93108075 >
8-MM X 1.25X80-MM HEX HEAD CAPSCREW-MET93108080ZINC >
8-MM X 1.25X110-MM HEX HEAD CAPSCREW-MET93108110 >
8-MM X 1.25X120-MM HEX HEAD CAPSCREW-MET93108120 >
8-MM X 1.25X140-MM HEX HEAD CAPSCREW-MET93108140 >
8-MM X 1.25X150-MM HEX HEAD CAPSCREW-MET93108150 >
8-MM X 1.25X160-MM HEX HEAD CAPSCREW-MET93108160 >
10-MM X 1.50X16-MM HEX HEAD CAPSCREW-MET93110016 >
10-MM X 1.50X20-MM HEX HEAD CAPSCREW-MET93110020 >
10-MM X 1.50X25-MM HEX HEAD CAPSCREW-MET93110025 >
10-MM X 1.50X30-MM HEX HEAD CAPSCREW-MET93110030 >
10-MM X 1.50X35-MM HEX HEAD CAPSCREW-MET93110035 >
10-MM X 1.50X40-MM HEX HEAD CAPSCREW-MET93110040 >
10-MM X 1.50X45-MM HEX HEAD CAPSCREW-MET93110045 >
10-MM X 1.50X55-MM HEX HEAD CAPSCREW-MET93110055 >
10-MM X 1.50X75-MM HEX HEAD CAPSCREW-MET93110075 >
10-MM X 1.50X110-MM HEX HEAD CAPSCREW-MET93110110 >
10-MM X 1.50X150-MM HEX HEAD CAPSCREW-MET93110150 >
10-MM X 1.50X150-MM HEX HEAD CAPSCREW-MET93110150ZINC >
10-MM X 1.50X160-MM HEX HEAD CAPSCREW-MET93110160 >
12-MM X 1.75X20-MM HEX HEAD CAPSCREW-MET93112020 >
12-MM X 1.75X30-MM HEX HEAD CAPSCREW-MET93112030 >
Recently Viewed
TAPERED ROLLER BEARING CONE - TIMHM801346>
GEARWRENCH® 9614N Non-Capstop Open End Regular Length Reversible Combination Wrench, 14 mm Wrench, 12 Points, 15 deg Offset, 7.398 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
#4-AWG X 3/8"-HOLE CABLE LUG - ILSCCL438>
PFC 391180 Commercial Standard Flat Washer, 7/16 in, 7/16 in ID x 1-1/8 in OD, 0.062 in THK, Stainless Steel
PFC 391180 Commercial Standard Flat Washer, 7/16 in, 7/16 in ID x 1-1/8 in OD, 0.062 in THK, Stainless Steel
Weller® 7250W Standard Soldering Tip, For Use With D550 and D650 Soldering Guns, 5.59 mm OD x 65.28 mm L, Copper
Weller® 7250W Standard Soldering Tip, For Use With D550 and D650 Soldering Guns, 5.59 mm OD x 65.28 mm L, Copper
JASON 3L310 FRACTIONAL HORSEPOWER V-BELT, 3/8" TOP WIDTH, 7/32" THICK, 31" LENGTH
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. FLEXIBLE IDEAL FOR USE WITH BACKSIDE IDLERS, STATIC DISSIPATING, MADE OF NATURAL RUBBER/SBR CORD OF POLYESTER AND COVERED WITH COTTON/POLYESTER BLEND
-JAS3L310 >
