CLAMPS
Eaton B-Line series right angle clamp, 3" H x 1.25" L x 2.8750" W, 400 Lbs load, Right angle clamp
B-Line is a leading manufacturer and fabricator of metal products used in the support of pipe hangers and support equipment for industrial, commercial, utility and HVACR applications. B-Line pipe hangers and supports includes a wide variety of support products such as beam clamps, pipe hangers, pipe clamps, pipe rollers, pipe supports, concrete inserts and brackets.
Features
5 safety factor
Bolted framing
600 lb (vertical pull)
7 ga THK
Conduit to Beam Right Angle Clamp 3/4-inch Steel
Safety factor of 5
Measures 3 Inch x 3-3/8 Inch x 2-3/8 Inch
Torque rating of 150 Inch-lb
1/2" -13" ROD SUPPORTS. DESIGN LOAD 1000 LBS BEAM CLAMPS-BLNB4441/2 >
Rectangular
Dimensions 1-3/16 Inch Width x 1-3/8 Inch Depth
Load Capacity 150 lb
Package Configuration Each: 3 in X 1.375 in X 1.375 in
Function Designed to attach electrical and mechanical components to structural beams
Net Weight 0.24 pound
Certifications cULus Listed
Bolt Size 1/4-20
Flange Thickness 3/4 Inch
BEAM FASTENER, 3/8-IN.-16 ROD SIZE, HOT DIP GALVANIZED>
Top flange C-clamp with a 3/8"-16 rod size and plain finish. Constructed from malleable iron, this wedge C-clamp is designed for applications with a 0.25" beam width. It has a load capacity of 560 lb and includes a setscrew and locknut
C Clamp
Type Wide Jaw Wedge
Maximum Jaw Capacity 1-1/4 Inch
Supplied with Screw Yes
Screw Type Square Head
3/8" PLAIN BEAM C-CLAMPS
1/2 B-Line Series C-Clamp, w/ Locknut, Zinc Plated
1/2" Standard U-Bolt (Zinc Plated)
Size Range: Size 1/2" (15mm) thru 30" (900mm) pipe
Material: Steel
Function: Recommended for support, anchor or guide of pipe.
Approvals: Underwriters Laboratories Listed 3/4" (20mm) thru 12" (300mm). Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 24 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 24.
Maximum Temperature: 750°F (399°C)
Finish: Zinc Plated
Eaton B-Line series plastic coated clevis hanger, 5" H x 1" D, Steel, Plain, 650 op temp, 6" max pipe size
Pipe Clevis Hanger, Standard, Series: B3100, 4 in Pipe, 5/8-11 Rod, 2-1/2 in Thread, 1430 lb Load, Specifications: 5-1/2 in Center of Pipe to Top of Hanger, Steel, Plain, 7-13/16 in H Dimensions, 650 deg F
Standard clevis hanger is recommended for the suspension of non-insulated pipe or insulated pipe with a B3151 shield
Pipe will not ‘pinch’ when installing
Swing in either direction allows pipe to easily feed thru
Engineered design aligns bolt holes for quicker overhead installation
TOLCO seismic restraint systems guidelines
MSS SP-69 & SP-58, type 1
Also available to accommodate rod schedule per National Fire Protection Association (NFPA) Pamphlet 13
1.25" H x 8.8510" L x 7.3750"
Plain
5" max pipe size
Engineered design aligns bolt holes for quicker overhead installation
15° swing in either direction allows pipe to easily feed thru
Pipe will not 'pinch' when installing
Type-1, standard
B-Line Clevis Hanger, Standard, Series: B3100, 8 in Pipe, 3/4-1 Rod, 2000 lb, Steel, Plain, 12-3/4 in H, 650 deg F
B-Line Pipe Clevis Hanger, Light Duty, Series: B3104, 1-1/2 in Pipe, 3/8-16 Rod, 2-1/2 in Thread, 250 lb Load, Specifications: 2-5/8 in Center of Pipe to Top of Hanger, Steel, Plain, 3-5/8 in H Dimensions
2-Piece Hinged Extension Split Pipe Clamp, 2" Conduit, 180 lb Load, Malleable Iron
B-Line BG-16-E-2-4 Conduit To Beam Fastener, 1" Conduit, 1/8" To 1/4" Flange
Technical Description:
360 Degree Pivot Type; ASTM A684, AISI 1055 Spheroidized Annealed Cold Rolled High Carbon Steel Material; Hammer-on, Pliers Installation; UL (Canada and Us) Approval; Side Mounting; 100 Per Box Standard Package; 1 Inch Conduit Size
360 Degree Pivot Type; ASTM A684, AISI 1055 Spheroidized Annealed Cold Rolled High Carbon Steel Material; Hammer-on, Pliers Installation; UL (Canada and Us) Approval; Bottom Mounting; 100 Per Box Standard Package; 1/2 Inch, 3/4 Inch Conduit Size
CONDUIT LOCKING BEAM CLIPS. 1/2" - 3/4" CONDUIT. 1/8" - 1/4" BEAM FLANGE. LOAD CAPACITY 25 LBS
Features:
Static Load Capacity: 400 lbs.
Finish: Zinc-Plated
With Retained Bolt And Thread Impression
SPRG 1/2" 400LB SS4 Emt Conduit Hanger
Eaton B-Line Series Conduit Support Fasteners, Conduit and Cable, 0.07LBS, Trade Size: 0, Conduit Size: 0.5" Emt, 0.5" Rigid, Stainless Steel Conduit Hangers, .5" Min, 4" Max Mount Size, Stainless Steel Type 304
Recently Viewed
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Morse® 002486 High Performance Universal Band Saw Blade, 44-7/8 in L, 1/2 in W x 0.02 in THK, 8/11 TPI, Bi-Metal Body
Morse ZWEP44811MC (002486), 44-7/8" x 1/2" x .020", 8/11 variable pitch, bimetal portable band is suitable for cutting any machinable metal, 1/2" or thicker. Patent pending, tooth design reduces vibration and strippage for faster cutting, and longer cutting life. Blades packaged three (3) per box.
MORSE® 11477 1332 General Purpose Jobber Length Drill Bit, W Drill - Letter, 0.386 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11477 1332 General Purpose Jobber Length Drill Bit, W Drill - Letter, 0.386 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
Koyo IR-1212 Inch Series Regular Width Inner Ring, 3/4 in ID x 1 in OD, 0.765 in OAW, For Use With B-1610, B-1612, BH-1610, BH-1612, J-1612, JH-1612, M-16101, M-16121, MH-16121, MJH-16121 Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
Klein® H268 Double Sheave Self-Locking Block, Fiber Rope Cable, 3/8 in, 750 lb Load, 2 in OD
This block features an eye to splice line to block and rope tie-off. Made of light galvanized steel and aluminum alloy. The sheaves have bronze bushings for long life.
2-GROOVE A-BELT H-BUSHING SHEAVE
