Circular Saw Blades

Diablo's general purpose saw blade is ideal for cutting oak, pine, plywood, pressure treated lumber and beams. An excellent choice for table & miter saws, Diablo's blade leaves a smooth cut in a variety of applications, reducing the need to change blades between tasks. Use it for rip cuts with a smoother finish than dedicated ripping blades, or make quality crosscuts in solid wood or plywood. Great for both sliding and “chop” style miter saws as well as table saws.

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness for superior wear and life delivering up to 25X longer life, 50X cooler cuts and 10X faster cuts when compared to standard grinding discs. Featuring a special Triple Chip Grind and Perma-SHIELD® coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks. A controlled cutting action produces larger chip sizes that generates less dust and airborne contaminates. The ability to cut through both metals and stainless steels eliminates the need for individually dedicated saw blades, offering a one-blade solution for the ultimate metal cutting performance and an unmatched value.

Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.

Diablo's next generation Saw Blades for Aluminum are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. The specially formulated metal cutting carbide teeth feature a Triple Chip Grind (TCG) Tooth Design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-Metal Shock Resistant Brazing allows these Aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability. Diablo's Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc.

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness for superior wear and life delivering up to 25X longer life, 50X cooler cuts and 10X faster cuts when compared to standard grinding discs. Featuring a special Triple Chip Grind and Perma-SHIELD® coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks. A controlled cutting action produces larger chip sizes that generates less dust and airborne contaminates. The ability to cut through both metals and stainless steels eliminates the need for individually dedicated saw blades, offering a one-blade solution for the ultimate metal cutting performance and an unmatched value.

Diablo's combination blade is ideal for ripping and crosscutting wood & wood composites with the goal of a smooth finish. The best choice for a table saw when one blade is needed for ripping and crosscutting. Each set of 5 teeth is separated by a large gullet. Diablo's large gullet provides the chip removal space required while ripping and the close grouping of teeth within the set provide the smaller bite size required when crosscutting.

Diablo's Fine Finish Saw Blades for Wood let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding.

Diablo's next generation Aluminum saw blades are optimized for cutting thin (up to 1/8”), medium (3/32”-1/4”) and thick (3/16”-7/16”) aluminum metals. Featuring the new, specially formulated Diablo TiCo™ Super-Density Micro-Grain Carbide, these radical blades withstand impact, reduce wear, provide clog free cuts and last longer than standard carbide in metal cutting applications. The specially formulated metal cutting carbide teeth feature a Triple Chip Grind (TCG) Tooth Design for clean, burr-free finishes, virtually eliminating any type of rework. Tri-Metal Shock Resistant Brazing allows these Aluminum blades to slice through metal materials while withstanding extreme impact for maximum durability. Diablo's Aluminum saw blade series is ideal for corded and cordless saws when on-the-job cutting non-ferrous metals such as aluminum extrusions, copper pipe, brass plate, etc.

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness for superior wear and life delivering up to 25X longer life, 50X cooler cuts and 10X faster cuts when compared to standard grinding discs. Featuring a special Triple Chip Grind and Perma-SHIELD® coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks. A controlled cutting action produces larger chip sizes that generates less dust and airborne contaminates. The ability to cut through both metals and stainless steels eliminates the need for individually dedicated saw blades, offering a one-blade solution for the ultimate metal cutting performance and an unmatched value.

Diablo’s Steel Demon™ Cermet II saw blades are redefining metal cutting, and the jobsite, by introducing exclusive innovation for cutting metals and stainless steels with a cordless or corded circular saw. The specially formulated Cermet II teeth provide high heat tolerance and increased hardness for superior wear and life delivering up to 25X longer life, 50X cooler cuts and 10X faster cuts when compared to standard grinding discs. Featuring a special Triple Chip Grind and Perma-SHIELD® coating, these blades slice through the toughest of metals to produce precise, burr-free cuts with less sparks. A controlled cutting action produces larger chip sizes that generates less dust and airborne contaminates. The ability to cut through both metals and stainless steels eliminates the need for individually dedicated saw blades, offering a one-blade solution for the ultimate metal cutting performance and an unmatched value.

This IRWIN Steel Circular Saw Blade is made with precision-ground circular saw teeth for smooth, accurate cuts. Its fully-hardened circular saw blade plate runs truer, longer, and the heavy-gauge, high-carbon steel construction provides an extended circular saw blade life.

Irwin® 15070 Combination Circular Saw Blade, 10 in Dia x 0.071 in THK, 5/8 in Arbor, Steel Blade, 24 Teeth

Irwin® 25030ZR Circular Saw Blade, 7-1/4 in Dia, 5/8 in Arbor, Steel Blade, 16 Teeth

Irwin® 4935560 Circular Saw Blade, 7-1/4 in Dia x 0.063 in THK, 5/8 in Arbor, 68 Teeth

Precision-ground teeth allow for smooth, accurate cuts. Corrosion-resistant coating helps prevent rusting. Classic Series blades offer professional performance at an economic price. 24 tooth count blades are ideally suited for framing, ripping, and deck jobs. IRWIN Tools Classic Series Steel Corded Circular Saw Blade, 7 1/4-inch, 24T (25130)

Irwin® Classic® 25230 Circular Saw Blade, 7-1/4 in Dia x 0.055 in THK, 5/8 in Arbor, Steel Blade, 40 Teeth

IRWIN Marathon circular saw blades last longer by design. A reinforced shoulder adds durability, and alternating carbide teeth are ground thinner to stay sharp longer and offer faster cutting.

400 Grit diamond ground teeth for smooth finish, alternate top bevel grind. Precision tensioned and balanced foran accuratecut, construction grade carbide teeth for longer life. Thin kerf for fast cuts.

Ultra-thin kerf delivers more cuts per charge and extends cordless tool battery life. 400 grit diamond-ground construction-grade carbide teeth make for fast, clean cuts and long tool life. The aggressive hook angle cuts fast. Blade is precision-tensioned and balanced for optimal performance with miter and table saws where smooth finish and accurate cuts are critical. 60 tooth count blades give balanced performance, delivering smooth cuts to plywood or melamine, with enough strength to cut framing lumber quickly. IRWIN Tools MARATHON Carbide Table / Miter Circular Blade, 10-Inch, 60T (14074)

Construction series saw blades-IRWIN Marathon saw blades, designed to meet the pressures of the jobsite, provide long life and durability without sacrificing speed of cut.

Makita® planer blades are designed for fast and smooth planning. The blades are made from fine grade high speed steel for added durability and long life. The blades install easily in the Makita® 12-1/4 in planer model KP312.

The Makita® 4-3/8 in 24 tooth carbide-tipped Circular Saw Blade is expertly tensioned for true cuts. The blade features a carbide tooth design for quality cuts and longer life. For use with Makita® 4200NH circular saw.

The Makita® 7-1/4 in (36T) cermet tipped saw Blade is for general purpose cutting in ferrous materials. The cermet tips last 2X longer than standard carbide tips. The Blade makes fast, virtually burr-free cuts and leaves the material cool to the touch.

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.