Roughing & Finishing End Mills
Drillco 690A108A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Uncoated
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
Drillco 675A148D 6750A Center Cutting Imperial Long Length Single End Finishing End Mill, 3/4 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3 in OAL, Uncoated
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 672A124A 6725A Center Cutting Imperial Medium Length Single End Finishing End Mill, 3/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/4 in OAL, Uncoated
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 670A148D 6700A Center Cutting Imperial Regular Length Single End Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 3-7/8 in OAL, Uncoated
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 670A132B 6700A Center Cutting Imperial Regular Length Single End Finishing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, Uncoated
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 55A148D 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Uncoated
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A132B 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Uncoated
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A128B 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 7/16 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Uncoated
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 55A124A 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/8 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Uncoated
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 51A216E 5100A Imperial Multi-Flute Non-Center Cutting Regular Length Single End Finishing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 7/8 in Dia Shank, 4-1/2 in OAL, Uncoated
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
MORSE® 90732 5943G Center Cutting Regular Length Single End End Mill, 5/8 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 5/8 in Dia Shank, 3-1/2 in OAL, TiN Coated
MORSE® 90734 5943G Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, TiN Coated
Recently Viewed
Browning 29-TOOTH #40-1-CHAIN SPROCKETS BRW H-4029 X 1-1/4
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
FYH® UCF211 32 UCF Cylindrical Flange Mount Ball Bearing Unit, 2 in Dia Bore
FYH® UCF211 32 UCF Cylindrical Flange Mount Ball Bearing Unit, 2 in Dia Bore
30 TOOTH SPROCKETS FOR #40 CHAIN-IDC40SH30 >
DOUBLE SHIELDED THIN BALL BEARING - GUL618042Z>
3/4" X 1" X 1-1/4" BRONZE BUSHING-FEBSS243220 >
Browning® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
