Drill Bit Sets

The MILWAUKEE® SHOCKWAVE Impact Duty™ 23PC RED HELIX™ Titanium Drill Bit Set is engineered for extreme durability and long life. The QUAD EDGE™ tip delivers a precision start and features four cutting edges to create smaller chips for faster material removal and less heat leading to improved performance. Designed with a VARIABLE HELIX™ flute that begins with an aggressive 35° helical angle and ends at 15° for rapid chip removal. The bits also feature an internal thicker tapered web that greatly increases strength, reducing premature breakage. Ideal for various applications including but not limited to wood, plastics, and metals. MILWAUKEE® RED HELIX™ Titanium Drill Bits provide up to 5X life vs. black oxide drill bits. The set is organized in a customizable accessory case designed for use in PACKOUT™.

The MILWAUKEE® SDS Plus 4-Cutter MX4™ 6-Piece Drill Bit Kit with solid head carbide deliver up to 5X longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar with a 4-cutter design that prevents lock-up, reducing downtime. The sharp centering tip offers exact spot drilling in concrete and metal decking. Variable flutes remove dust faster, reducing heat and delivering up to 20% more holes per battery charge. A wear mark indicator shows end of life and when bit no longer meets the ANSI requirement. The Milwaukee MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.

Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.

The Milwaukee® 7-piece contractor's Selfeed bit kit is a complete assortment of the high-performance Milwaukee Selfeed drill bits you need on the jobsite. Milwaukee Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The dymobits improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. The kit includes Selfeed bits in diameters 1 in., 1-1/8 in., 1-1/4 in., 1-1/2 in., 1-3/4 in., 2-1/8 in., and 2-9/16 in. in an impact resistant carrying case.

Bore small, clean holes at any angle in a variety of materials with the Milwaukee® 6-piece 6 in. universal flat boring bit set. These premium quality flat boring bits are made of heat-treated high carbon steel, so the drill points and cutting edges can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. These bits offer a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling. 3/16 in. shank diameter. The set consists of six of the most popular size bits (3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in. and 1 in.) in a carrying case.

The Milwaukee® plumber's Selfeed bit kit is a convenient, cost-effective assortment of the high-performance Milwaukee Selfeed drill bits and spur auger bits you need on the jobsite. Milwaukee Selfeed drill bits deliver speed and endurance for repetitive drilling of large holes. Designed for trades that demand woodcutting for installing pipe and conduit, Selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee Selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these Selfeed bits are resharpenable so you can keep them cutting like new. The kit includes Selfeed bits in diameters 1-3/4 in., 2-1/8 in., and 2-9/16 in., as well as spur auger bits in diameters 7/8 in., 1-1/8 in., 1-1/4 in. and 1-1/2 in.

The MILWAUKEE® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are designed with sharpened carbide to deliver up to 9x longer life and 4x faster drilling into concrete. The POWER TIP™, available in sizes 3/8" and above, is designed with dynamic cutting edges and a chip breaker for increased productivity and easier drilling from start to finish. Engineered with precision ground carbide, these bits deliver faster starts and less walking in concrete, brick, and block. Wide flute design removes dust faster, reducing heat and delivering more holes per charge. Equipped with a ¼” Hex Shank, Milwaukee® SHOCKWAVE™ Impact Duty Carbide Hammer Drill Bits are the ideal solution for drilling in masonry materials with both impacts and hammer drills/drivers.

ITM BG-13 Jobber Drill, 1/16 in Min Drill Bit, 1/2 in Max Drill Bit, 135 deg Drill Point Angle, 13 Pieces

ITM AD-8 Deming Drill, 9/16 in Min Drill Bit, 1 in Max Drill Bit, 118 deg Drill Point Angle, 8 Pieces, Silver, Black Oxide

Irwin® Unibit® step drill bits are ideal for drilling holes in just about any type of thin material. General purpose high speed steel Unibit® step drill bits are perfect for use in mild steel, copper, brass, aluminum, plexiglass, wood and laminate. Our titanium nitride coated (TiN) bits resist heat and friction, which extends the life of the cutting edge six times longer than standard step drills. And, our cobalt step drill bits are engineered with M35 cobalt steel for maximum life when drilling in the toughest steel, including stainless steel. Most Unibit® step drills are designed with a SpeedPoint® tip that guarantees fast starts. They're manufactured with a single flute cutting edge that drills multiple sizes of true, round holes with precise step control. Plus, the hole sizes are permanently laser etched on the inside of the flute, so they can be easily identified throughout the life of the bit.

The IRWIN Unibit High-Speed Steel Step Drill Set features single-flute cutting edges for greater control and more precise drilling. Three-flatted shanks prevent the bits from slipping in the drill while the non-skid self-starting tips eliminate skidding and the need for center punching. Set includes #1, 2, 4, and 21 size step drills.

The improved SPEEDBOR Spade Bits now last 2X Longer* and cut 2X Faster*. Next-generation SPEEDBOR Spade Bits feature a chamfered cutting edge for durability in cutting wood and optimized point tip that is wider and longer than previous IRWIN spade bits to minimize splintering and control speed. Patented Blue-Groove cutting edge allows for a large cutting area for aggressive removal of wood chips and fast drilling.

Irwin® Speedbor® 3018009 Pro Jobber Length Drill Set, 1/16 in Min Drill Bit, 3/8 in Max Drill Bit, 135 deg Drill Point Angle, 15 Pieces, HSS, TiN Coated

Greenlee® Kwik Stepper® 35884 Multi-Hole Step Bit Kit, 1/2 in Min Drill Bit, 1-1/8 in Max Drill Bit, 3 Pieces, Steel, Oxide Coated

Greenlee® Kwik Stepper® 03607 Multi-Hole Step Bit Kit, 1/2 in Min Drill Bit, 7/8 in Max Drill Bit, 60 deg Drill Point Angle, 3 Pieces, Steel, Oxide Coated

Heavy-duty construction makes these drills suitable for more demanding applications. Designed for efficient drilling in stainless steel and tougher ferrous materials. The 135º split point reduces the thrust requirements and minimizes walking.

Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.

Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.

Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.

Nitro® drills (NAS Type B) offer superior performance over standard HSS drills. Heavy-duty design increases tool life and performance. 135° Split Point reduces walking at the point. Ideal for both hand held and CNC Operations. Black & Gold.

M42 Cobalt High Speed Steel for super abrasive resistance in tough metals. Used in left hand screw machines and with screw extractors. Can be used to drill out broken bolts and other hardened fasteners. 11pc set in rollup pouch.

200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand.  They are also used in left hand screw machines.  Can be used to drill out broken bolts.

200LH drills are used in close center multiple spindle gear driven drilling heads, where adjacent spindles operate alternately left and right hand.  They are also used in left hand screw machines.  Can be used to drill out broken bolts.

Nitro® S&D drills offer superior performance over conventional HSS drills. All drills have a 1/2" shank, and are 6" overall length. Their heavy-duty construction increases tool life and performance. 118° Split Point reduces walking at the drill point.