COIL CLEANERS
358-20 Diversitech19-oz Aerosol Foaming Coil Cleaner
Heavy-duty foaming detergent coil cleaner in an aerosol can. Non-flammable and water-based with no chlorinated solvents. Blasting foam stream reaches into tight areas for maximum cleaning. The foaming alkaline detergent quickly liquefies dirt, grease, oil or other residue and is completely self-rinsing on condensate producing coils.
FEATURES
Heavy duty foaming detergent coil cleaner in an aerosol can
Non-flammable and water-based with no chlorinated solvents
Blasting foam stream reaches into tight areas for maximum cleaning
The foaming alkaline detergent quickly liquefies dirt, grease, oil or other residue and is completely self-rinsing on condensate producing coils
604909 DO-IT-BEST/LANDMARK COIL CLEEN 32 OZ. READY TO USE TRIGGER SPRAY AIR CONDITIONER COIL CLEANER
INSTANTLY REMOVES DIRT AND GRIME WHICH INCREASES COOLING EFFICIENCY. READY TO USE FORMULA. 32 OZ.
-JWH604909 >
627453 DO-IT-BEST/LANDMARK COIL CLEEN 1 GAL. READY TO USE REFILL AIR CONDITIONER COIL CLEANER
AIR CONDITIONER FIN AND COIL CLEANER. INSTANTLY REMOVES DIRT AND GRIME WHICH INCREASES COOLING EFFICIENCY. SPRAY COIL CLEEN ON AIR CONDITIONER COILS, LEAVE ON FOR 3 TO 5 MINUTES, THEN RINSE. READY TO USE FORMULA
- JWH627453>
A-00357 18-oz Aerosol Coil Cleaner
18-OZ AEROSOL COIL CLEANER SOLVENT-MISA00357 >
Recently Viewed
Koyo NTA-1423 Inch Series Caged Round Bore Single Row Thrust Needle Roller and Cage Assembly, 7/8 in Dia Bore, 1.437 in OD, 0.0781 in W, 7/8 in Dia Shaft, High Carbon Chrome Steel Bearing/Carbon Steel Cage
Thrust Needle Roller and Cage Assemblies are the complements of small diameter needle rollers, arranged in spoke-like configuration. Needle rollers are equally spaced means of cage, its web section separates the rollers and provides guidance to keep them tracking in an orbital path. The purpose of these assemblies is to transmit a thrust load between two relatively rotating objects while greatly reducing friction. Thrust Needle Roller and Cage Assemblies also can be utilized with lipped washer to serve as raceway surface for the needle rollers. Washers can be supplied separately or can be mechanically unitized to the Thrust Needle Roller and Cage Assemblies for ease of handling.
DRILLCO 21N132CP 2100N Spiral Point Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, HSS
Nitro Spiral Point CNC Machine Taps. The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
